Ile fire, September 2026 Mocuba, Ile, Mulevala
The fire started on 3 September 2026 in Ile, Mozambique, and satellites saw it burning for 26 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 7,172 hectares from heat detections, spread across 3 municipalities.
It is the 235th largest in Zambézia since 2016 (of 842 with a page). Number 130 in Mozambique in 2026, of 532.
Compare with…
Suggestions: Mocuba · 2026Ile · 2026Mocubela · 2024Mocuba · 2026
- Burnt area
- 7,172ha
- GWIS perimeter (Copernicus)
- Duration
- 26days
- 3 Sept 2026 – 28 Sept 2026
- Municipalities hit
- 3
- districts
- Started on
- 3 Sept
- 2026
- Heat detections
- 166
- in a single hotspot: 40 MW
- Danger at start
- 37
- High · FWI index
- Average daily power
- 55MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 5 days without rain (1 mm or more) when it started. Rain came after the fire: 7.5 mm on 29 Sept.
This area had burned before
60% of the perimeter overlaps earlier fires recorded since 2016: 1,150 ha in 2016, 824 ha in 2017, 2,490 ha in 2018, 655 ha in 2021, 1,226 ha in 2024, 1,230 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 4,273 ha that had burned before.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
4,155 ha reached on 3 Sept0.5 %
-
Ile where it started3,034 ha reached on 4 Sept1.0 %
-
17 ha reached on 3 Sept0.0 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 3 Sept | 32.7 °C | 25 % | 32 km/h | 0.0 mm | High 37 |
| 4 Sept | 33.6 °C | 26 % | 36 km/h | 0.0 mm | High 36 |
| 5 Sept | 32.1 °C | 32 % | 32 km/h | 0.0 mm | High 36 |
| 6 Sept | 31.0 °C | 34 % | 33 km/h | 0.0 mm | High 34 |
| 7 Sept | 29.2 °C | 37 % | 40 km/h | 0.1 mm | High 35 |
| 8 Sept | 24.2 °C | 51 % | 42 km/h | 2.5 mm | Low 9 |
| 9 Sept | 25.2 °C | 59 % | 30 km/h | 2.5 mm | Low 6 |
| 10 Sept | 28.8 °C | 50 % | 24 km/h | 0.9 mm | Low 10 |
| 11 Sept | 30.5 °C | 44 % | 31 km/h | 0.3 mm | Moderate 21 |
| 12 Sept | 32.3 °C | 31 % | 34 km/h | 0.0 mm | High 30 |
| 13 Sept | 31.5 °C | 31 % | 29 km/h | 0.0 mm | High 30 |
| 14 Sept | 31.6 °C | 30 % | 31 km/h | 0.0 mm | High 30 |
| 15 Sept | 34.2 °C | 24 % | 37 km/h | 0.0 mm | High 36 |
| 16 Sept | 32.5 °C | 27 % | 54 km/h | 0.0 mm | Very high 45 |
| 17 Sept | 34.0 °C | 24 % | 38 km/h | 0.0 mm | Very high 40 |
| 18 Sept | 33.5 °C | 21 % | 36 km/h | 0.0 mm | Very high 41 |
| 19 Sept | 30.8 °C | 30 % | 37 km/h | 0.0 mm | Very high 40 |
| 20 Sept | 30.3 °C | 32 % | 32 km/h | 0.0 mm | High 36 |
| 21 Sept | 31.3 °C | 39 % | 34 km/h | 0.0 mm | High 34 |
| 22 Sept | 29.0 °C | 46 % | 36 km/h | 0.1 mm | High 31 |
| 23 Sept | 29.6 °C | 38 % | 32 km/h | 0.0 mm | High 28 |
| 24 Sept | 31.0 °C | 35 % | 35 km/h | 0.0 mm | High 32 |
| 25 Sept | 30.4 °C | 34 % | 35 km/h | 0.0 mm | High 31 |
| 26 Sept | 32.3 °C | 33 % | 25 km/h | 0.0 mm | High 29 |
| 27 Sept | 35.7 °C | 24 % | 28 km/h | 0.0 mm | High 37 |
| 28 Sept | 36.4 °C | 27 % | 29 km/h | 0.0 mm | Very high 39 |
| 29 Sept after | 32.9 °C | 42 % | 33 km/h | 7.5 mm | Low 8 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 3 September 2026 the air beside the fire reached 66 µg/m³ of PM2.5. That day averaged 37: 2.5 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 166Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Ile fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 3 September 2026 to 28 September 2026 (26 days). The perimeter dates it from 10 September 2026 to 21 September 2026.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 7,172 hectares (71.7 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 3 municipalities: Mocuba (4,155 ha, 0.5 %); Ile (3,034 ha, 1.0 %); Mulevala (17 ha, 0.0 %).
- Is the Ile fire still active?
- No fire detections since 28 Sept 2026, 11:00 UTC. A lack of detections is not an official extinction.
- What was the weather like?
- During the fire the temperature reached 36.4 °C, humidity dropped to 21 % and gusts hit 54 km/h. The fire danger index (FWI) reached 45, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mozambique (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 10 September 2026 to 21 September 2026. 166 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.