Skip to content
worldfires
ZW · Zimbabwe · –

Hurungwe fire, 8 September 2025 Kariba, Hurungwe

Out · last detection 19 Sept 2025, 00:11 UTC

The fire started on 8 September 2025 in Hurungwe, Zimbabwe, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 9,246 hectares from heat detections, spread across 2 municipalities.

Number 3 in Zimbabwe in 2025, of 147.

GWIS near-real-time perimeter, from the layer that changed in August 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
9,246ha
GWIS perimeter (Copernicus)
Duration
12days
8 Sept 2025 – 19 Sept 2025
Municipalities hit
2
districts
Started on
8 Sept
2025
Heat detections
231
in a single hotspot: 86 MW
Danger at start
68
Extreme · FWI index
Average daily power
121MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 8 Sept19 Sept
19 Sept 2025

How it evolved, day by day

8 Sept 2025 · 392 MW · 20 9 Sept 2025 · 255 MW · 42 10 Sept 2025 · 153 MW · 40 11 Sept 2025 · 295 MW · 36 12 Sept 2025 · 177 MW · 29 13 Sept 2025 · 11 MW · 3 14 Sept 2025 · 51 MW · 17 15 Sept 2025 · 61 MW · 23 16 Sept 2025 · 15 MW · 9 17 Sept 2025 · 18 MW · 4 18 Sept 2025 · 23 MW · 6 19 Sept 2025 · 4 MW · 2
8 Sept 11 Sept 14 Sept 17 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
56km/h · peak gust
14%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

83% of the perimeter overlaps earlier fires recorded since 2016: 2,668 ha in 2017, 2,425 ha in 2018, 4,400 ha in 2019, 103 ha in 2020, 5,122 ha in 2022, 1,035 ha in 2023, 785 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 7,699 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 5.8% of the area of London (92 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 7,154 ha
    0.9 %
  2. Hurungwe where it started
    2,124 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 54 % of the area in Zimbabwe Strong wind: 11 % of the area in Zimbabwe 60 days without rain: 63 % of the area in Zimbabwe

Day High Min. humidity Peak gust Rain Danger (FWI)
8 Sept 33.2 °C 22 % 51 km/h 0.0 mm Extreme 68
9 Sept 33.2 °C 21 % 52 km/h 0.0 mm Very extreme 76
10 Sept 32.3 °C 25 % 52 km/h 0.0 mm Extreme 64
11 Sept 32.3 °C 27 % 49 km/h 0.0 mm Extreme 60
12 Sept 33.8 °C 20 % 48 km/h 0.0 mm Extreme 59
13 Sept 31.8 °C 21 % 51 km/h 0.0 mm Extreme 64
14 Sept 34.3 °C 14 % 48 km/h 0.0 mm Extreme 60
15 Sept 34.1 °C 17 % 49 km/h 0.0 mm Extreme 62
16 Sept 35.1 °C 16 % 46 km/h 0.0 mm Extreme 65
17 Sept 37.6 °C 14 % 41 km/h 0.0 mm Extreme 60
18 Sept 36.0 °C 18 % 56 km/h 0.0 mm Very extreme 86
19 Sept 35.2 °C 23 % 51 km/h 0.0 mm Very extreme 83
20 Sept after 32.2 °C 22 % 59 km/h 0.0 mm Very extreme 94
21 Sept after 31.6 °C 21 % 45 km/h 0.0 mm Extreme 63
22 Sept after 33.6 °C 22 % 46 km/h 0.0 mm Extreme 66
23 Sept after 35.8 °C 16 % 53 km/h 0.0 mm Extreme 69
24 Sept after 34.9 °C 23 % 58 km/h 0.0 mm Very extreme 75
25 Sept after 34.8 °C 21 % 60 km/h 0.0 mm Very extreme 80
26 Sept after 32.0 °C 27 % 53 km/h 0.0 mm Extreme 68
27 Sept after 31.7 °C 29 % 60 km/h 0.0 mm Very extreme 74
28 Sept after 35.6 °C 23 % 54 km/h 0.0 mm Extreme 64
29 Sept after 34.9 °C 24 % 43 km/h 0.2 mm Very high 46

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 1 Sept 2025
After · 26 Sept 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 19 September 2025 the air beside the fire reached 31 µg/m³ of PM2.5. That day averaged 26: 1.7 times the WHO daily guideline (15).

PM2.5 peak31 µg/m³
Days over the guideline11 days
PM1032 µg/m³
Optical depth0.75
6 Sept10 Sept14 Sept18 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 231Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Zimbabwe

Frequently asked questions

How long did the Hurungwe fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 8 September 2025 to 19 September 2025 (12 days). The perimeter dates it from 8 September 2025 to 18 September 2025.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,246 hectares (92.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Kariba (7,154 ha, 0.9 %); Hurungwe (2,124 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 37.6 °C, humidity dropped to 14 % and gusts hit 56 km/h. The fire danger index (FWI) reached 86, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Zimbabwe (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Name: Kariba → Hurungwe.
  2. Last day with fire: 18 September 2025 → 19 September 2025.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 8 September 2025 to 18 September 2025. 231 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.