Hot fire, 3 March 2024 Hot, Li, Doi Tao
The fire started on 3 March 2024 in Hot, Thailand, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,777 hectares from heat detections, spread across 3 municipalities.
It is the 55th largest in Chiang Mai Province since 2016 (of 463 with a page). Number 38 in Thailand in 2024, of 350.
The power measured by the satellite is low (19.3 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.
- Burnt area
- 3,777ha
- GWIS perimeter (Copernicus)
- Duration
- 12days
- 3 Mar 2024 – 14 Mar 2024
- Municipalities hit
- 3
- districts
- Started on
- 3 Mar
- 2024
- Heat detections
- 113
- in a single hotspot: 19 MW
- Danger at start
- 26
- High · FWI index
- Energy released
- 432MW
- sum of detected power
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 25 days without rain (1 mm or more) when it started. Rain came after the fire: 11.0 mm on 20 Mar.
This area had burned before
83% of the perimeter overlaps earlier fires recorded since 2016: 710 ha in 2016, 2,477 ha in 2017, 231 ha in 2018, 760 ha in 2019, 1,164 ha in 2020, 749 ha in 2021, 169 ha in 2022, 1,498 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 3,146 ha that had burned before.
What happened to each town
-
Hot where it started3,370 ha reached on 3 Mar2.2 %
-
385 ha reached on 1 Mar0.2 %
-
42 ha reached on 9 Mar0.0 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 25 Feb | 36.9 °C | 24 % | 19 km/h | 0.0 mm | High 26 |
| 26 Feb | 34.7 °C | 42 % | 19 km/h | 0.1 mm | High 23 |
| 27 Feb | 34.1 °C | 48 % | 26 km/h | 0.5 mm | Moderate 20 |
| 28 Feb | 36.0 °C | 35 % | 26 km/h | 0.0 mm | High 23 |
| 29 Feb | 37.0 °C | 25 % | 24 km/h | 0.0 mm | High 29 |
| 1 Mar | 37.2 °C | 24 % | 23 km/h | 0.0 mm | High 30 |
| 2 Mar | 37.8 °C | 25 % | 27 km/h | 0.0 mm | High 30 |
| 3 Mar | 36.3 °C | 29 % | 36 km/h | 0.0 mm | High 34 |
| 4 Mar | 36.8 °C | 24 % | 32 km/h | 0.0 mm | High 33 |
| 5 Mar | 37.3 °C | 24 % | 22 km/h | 0.0 mm | High 32 |
| 6 Mar | 37.3 °C | 27 % | 18 km/h | 0.0 mm | High 32 |
| 7 Mar | 36.5 °C | 30 % | 23 km/h | 0.0 mm | High 31 |
| 8 Mar | 38.1 °C | 29 % | 28 km/h | 0.0 mm | High 33 |
| 9 Mar | 37.8 °C | 23 % | 35 km/h | 0.0 mm | High 36 |
| 10 Mar | 37.3 °C | 27 % | 26 km/h | 0.0 mm | High 35 |
| 11 Mar | 37.5 °C | 23 % | 24 km/h | 0.0 mm | High 34 |
| 12 Mar | 37.2 °C | 26 % | 42 km/h | 0.0 mm | Very high 40 |
| 13 Mar | 36.7 °C | 20 % | 34 km/h | 0.0 mm | Very high 38 |
| 14 Mar | 36.1 °C | 27 % | 22 km/h | 0.0 mm | High 35 |
| 15 Mar after | 35.7 °C | 29 % | 18 km/h | 0.0 mm | High 33 |
| 16 Mar after | 36.9 °C | 29 % | 20 km/h | 0.0 mm | High 36 |
| 17 Mar after | 36.4 °C | 31 % | 20 km/h | 0.0 mm | High 33 |
| 18 Mar after | 36.8 °C | 34 % | 18 km/h | 0.0 mm | High 33 |
| 19 Mar after | 37.4 °C | 32 % | 26 km/h | 0.0 mm | High 35 |
| 20 Mar after | 29.8 °C | 67 % | 27 km/h | 11.0 mm | Very low 1 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 17 March 2024 the air beside the fire reached 57 µg/m³ of PM2.5. That day averaged 45: 3.0 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 113Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Hot fire last?
- GWIS (Copernicus) dates it between 3 March 2024 and 14 March 2024: 12 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,777 hectares (37.8 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 3 municipalities: Hot (3,370 ha, 2.2 %); Li (385 ha, 0.2 %); Doi Tao (42 ha, 0.0 %).
- What was the weather like?
- During the fire the temperature reached 38.1 °C, humidity dropped to 20 % and gusts hit 42 km/h. The fire danger index (FWI) reached 40, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Thailand (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 199 · 191
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.