Skip to content
worldfires
AU · Australia · –

Halls Creek fire, 3 August 2026 Halls Creek, Wyndham-East Kimberley

Out · last detection

The fire started on in Halls Creek, Australia, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 31,646 hectares from heat detections, spread across 2 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
31,646ha
GWIS perimeter (Copernicus)
Duration
13days
3 Aug 2026 – 15 Aug 2026
Municipalities hit
2
local government areas
Started on
3 Aug
2026
Heat detections
684
in a single hotspot: 68 MW
Danger at start
68
Extreme · FWI index
Average daily power
481MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 3 Aug15 Aug
13 Aug 2026

How it evolved, day by day

3 Aug 2026 · 31 MW · 8 4 Aug 2026 · 272 MW · 50 5 Aug 2026 · 973 MW · 168 6 Aug 2026 · 709 MW · 74 7 Aug 2026 · 133 MW · 25 8 Aug 2026 · 433 MW · 54 9 Aug 2026 · 464 MW · 76 10 Aug 2026 · 1,575 MW · 109 11 Aug 2026 · 283 MW · 41 12 Aug 2026 · 232 MW · 55 13 Aug 2026 · 186 MW · 24
3 Aug 6 Aug 10 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (27 passes) and with what wind. Watch the film

The weather it burned in

34°high
44km/h · peak gust
11%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

97% of the perimeter overlaps earlier fires recorded since 2016: 8,085 ha in 2016, 2,851 ha in 2017, 17,003 ha in 2018, 52 ha in 2019, 404 ha in 2021, 8,345 ha in 2022, 15,032 ha in 2023, 10,953 ha in 2024, 8,705 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 30,728 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 20% of the area of London (316 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Halls Creek where it started
    31,898 ha
    0.2 %
  2. 210 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.53 ha
Residents< 20

Inside the perimeter there were about 0.53 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Very dry air: 28 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
3 Aug 30.7 °C 13 % 36 km/h 0.0 mm Extreme 68
4 Aug 31.1 °C 26 % 37 km/h 0.0 mm Extreme 65
5 Aug 31.7 °C 24 % 40 km/h 0.0 mm Extreme 68
6 Aug 31.7 °C 20 % 36 km/h 0.0 mm Extreme 60
7 Aug 32.0 °C 15 % 34 km/h 0.0 mm Extreme 65
8 Aug 33.2 °C 19 % 31 km/h 0.0 mm Extreme 59
9 Aug 32.4 °C 26 % 44 km/h 0.0 mm Extreme 70
10 Aug 30.4 °C 14 % 31 km/h 0.0 mm Extreme 59
11 Aug 33.7 °C 26 % 32 km/h 0.0 mm Extreme 57
12 Aug 32.2 °C 11 % 42 km/h 0.0 mm Extreme 68
13 Aug 31.8 °C 24 % 42 km/h 0.0 mm Very extreme 71
14 Aug 31.8 °C 27 % 40 km/h 0.0 mm Extreme 68
15 Aug 32.8 °C 23 % 34 km/h 0.0 mm Extreme 53
16 Aug after 33.8 °C 20 % 27 km/h 0.0 mm Very high 48
17 Aug after 33.2 °C 29 % 30 km/h 0.0 mm Extreme 51
18 Aug after 32.9 °C 31 % 30 km/h 0.0 mm Extreme 54
19 Aug after 33.2 °C 30 % 34 km/h 0.0 mm Extreme 56
20 Aug after 34.8 °C 22 % 31 km/h 0.0 mm Extreme 61
21 Aug after 34.3 °C 22 % 37 km/h 0.0 mm Extreme 69
22 Aug after 33.7 °C 24 % 30 km/h 0.0 mm Extreme 57
23 Aug after 33.7 °C 24 % 25 km/h 0.0 mm Very high 49
24 Aug after 34.0 °C 22 % 20 km/h 0.0 mm Very high 45
25 Aug after 35.4 °C 21 % 38 km/h 0.0 mm Extreme 60

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 27 Jul 2026
After · 22 Aug 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 7 August 2026 the air beside the fire reached 79 µg/m³ of PM2.5. That day averaged 29: 1.9 times the WHO daily guideline (15).

PM2.5 peak79 µg/m³
Days over the guideline1 day
PM1080 µg/m³
Optical depth0.25
1 Aug5 Aug9 Aug13 Aug17 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 684Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Halls Creek fire last?
GWIS (Copernicus) dates it between 3 August 2026 and 15 August 2026: 13 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 31,646 hectares (316.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Halls Creek (31,898 ha, 0.2 %); Wyndham-East Kimberley (210 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 33.7 °C, humidity dropped to 11 % and gusts hit 44 km/h. The fire danger index (FWI) reached 71, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 684 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.