Skip to content
worldfires
AU · Australia · –

Halls Creek fire, 30 August 2023 Halls Creek

Out · last detection

The fire started on in Halls Creek, Australia, and satellites saw it burning for 18 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 37,448 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
37,448ha
GWIS perimeter (Copernicus)
Duration
18days
30 Aug 2023 – 16 Sept 2023
Municipalities hit
1
local government areas
Started on
30 Aug
2023
Heat detections
1,487
in a single hotspot: 96 MW
Danger at start
82
Very extreme · FWI index
Average daily power
585MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 30 Aug16 Sept
16 Sept 2023

How it evolved, day by day

30 Aug 2023 · 5 MW · 4 31 Aug 2023 · 97 MW · 26 1 Sept 2023 · 217 MW · 42 2 Sept 2023 · 1,041 MW · 138 3 Sept 2023 · 1,934 MW · 168 4 Sept 2023 · 580 MW · 107 5 Sept 2023 · 1,458 MW · 137 6 Sept 2023 · 413 MW · 78 7 Sept 2023 · 886 MW · 129 8 Sept 2023 · 1,375 MW · 196 9 Sept 2023 · 1,011 MW · 158 10 Sept 2023 · 774 MW · 132 11 Sept 2023 · 421 MW · 94 12 Sept 2023 · 210 MW · 45 13 Sept 2023 · 17 MW · 3 14 Sept 2023 · 48 MW · 14 15 Sept 2023 · 42 MW · 12 16 Sept 2023 · 5 MW · 4
30 Aug 3 Sept 7 Sept 11 Sept 15 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
51km/h · peak gust
9%lowest humidity

It had gone 59 days without rain (1 mm or more) when it started.

This area had burned before

86% of the perimeter overlaps earlier fires recorded since 2016: 18,827 ha in 2016, 137 ha in 2017, 26,069 ha in 2018, 367 ha in 2021, 796 ha in 2022. Part of it burned more than once, so the yearly figures add up to more than the 32,252 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 24% of the area of London (374 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Halls Creek where it started
    37,284 ha
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.15 ha
Residents< 20

Inside the perimeter there were about 0.15 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Very dry air: 28 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
30 Aug 33.0 °C 11 % 42 km/h 0.0 mm Very extreme 82
31 Aug 34.0 °C 10 % 34 km/h 0.0 mm Very extreme 72
1 Sept 32.8 °C 12 % 41 km/h 0.0 mm Very extreme 77
2 Sept 32.3 °C 14 % 41 km/h 0.0 mm Very extreme 80
3 Sept 33.0 °C 18 % 26 km/h 0.0 mm Extreme 58
4 Sept 33.2 °C 18 % 36 km/h 0.0 mm Very high 48
5 Sept 33.6 °C 16 % 26 km/h 0.0 mm Extreme 59
6 Sept 33.1 °C 21 % 24 km/h 0.0 mm Very high 47
7 Sept 33.8 °C 22 % 27 km/h 0.0 mm Extreme 59
8 Sept 35.2 °C 18 % 38 km/h 0.0 mm Very extreme 74
9 Sept 33.8 °C 18 % 47 km/h 0.0 mm Very extreme 80
10 Sept 34.2 °C 14 % 45 km/h 0.0 mm Very extreme 76
11 Sept 34.1 °C 12 % 51 km/h 0.0 mm Very extreme 94
12 Sept 32.1 °C 9 % 47 km/h 0.0 mm Very extreme 89
13 Sept 32.2 °C 20 % 51 km/h 0.0 mm Very extreme 79
14 Sept 32.8 °C 16 % 45 km/h 0.0 mm Very extreme 70
15 Sept 33.5 °C 17 % 49 km/h 0.0 mm Very extreme 79
16 Sept 32.9 °C 15 % 47 km/h 0.0 mm Very extreme 91
17 Sept after 32.7 °C 19 % 44 km/h 0.0 mm Very extreme 85
18 Sept after 33.7 °C 17 % 36 km/h 0.0 mm Very extreme 75
19 Sept after 34.2 °C 17 % 34 km/h 0.0 mm Extreme 67
20 Sept after 35.1 °C 16 % 29 km/h 0.0 mm Extreme 63
21 Sept after 36.7 °C 15 % 39 km/h 0.0 mm Very extreme 80
22 Sept after 37.2 °C 10 % 56 km/h 0.0 mm Very extreme 100
23 Sept after 36.4 °C 8 % 48 km/h 0.0 mm Very extreme 88
24 Sept after 36.2 °C 5 % 41 km/h 0.0 mm Very extreme 83
25 Sept after 37.0 °C 8 % 41 km/h 0.0 mm Very extreme 88
26 Sept after 37.9 °C 13 % 37 km/h 0.0 mm Very extreme 91

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 23 Aug 2023
After · 23 Sept 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 4 September 2023 the air beside the fire reached 43 µg/m³ of PM2.5. That day averaged 26: 1.7 times the WHO daily guideline (15).

PM2.5 peak43 µg/m³
Days over the guideline4 days
PM1062 µg/m³
Optical depth1.49
28 Aug2 Sept7 Sept12 Sept17 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,487Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Halls Creek fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 30 August 2023 to 16 September 2023 (18 days). The perimeter dates it from 30 August 2023 to 15 September 2023.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 37,448 hectares (374.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Halls Creek (37,284 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 35.2 °C, humidity dropped to 9 % and gusts hit 51 km/h. The fire danger index (FWI) reached 94, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 15 September 2023 → 16 September 2023.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 30 August 2023 to 15 September 2023. 1,487 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.