Skip to content
worldfires
AU · Australia · –

Halls Creek fire, 9 September 2018 Halls Creek

Out · last detection 28 Sept 2018, 16:39 UTC

The fire started on 9 September 2018 in Halls Creek, Australia, and satellites saw it burning for 20 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 29,845 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
29,845ha
GWIS perimeter (Copernicus)
Duration
20days
9 Sept 2018 – 28 Sept 2018
Municipalities hit
1
local government areas
Started on
9 Sept
2018
Heat detections
862
in a single hotspot: 73 MW
Danger at start
70
Extreme · FWI index
Average daily power
344MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 9 Sept28 Sept
28 Sept 2018

How it evolved, day by day

9 Sept 2018 · 508 MW · 61 10 Sept 2018 · 550 MW · 113 11 Sept 2018 · 1,247 MW · 103 12 Sept 2018 · 1,204 MW · 147 13 Sept 2018 · 306 MW · 44 14 Sept 2018 · 117 MW · 16 15 Sept 2018 · 452 MW · 68 16 Sept 2018 · 363 MW · 76 17 Sept 2018 · 662 MW · 52 18 Sept 2018 · 312 MW · 27 19 Sept 2018 · 298 MW · 42 20 Sept 2018 · 361 MW · 35 21 Sept 2018 · 26 MW · 6 22 Sept 2018 · 50 MW · 12 23 Sept 2018 · 166 MW · 18 24 Sept 2018 · 38 MW · 9 25 Sept 2018 · 46 MW · 12 26 Sept 2018 · 57 MW · 9 27 Sept 2018 · 73 MW · 4 28 Sept 2018 · 37 MW · 8
11 Sept 17 Sept 21 Sept 25 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
54km/h · peak gust
4%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

61% of the perimeter overlaps earlier fires recorded since 2016: 18,242 ha in 2016.

How big is it?

10 km
It burned the equivalent of 19% of the area of London (298 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Halls Creek where it started
    29,716 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.28 ha
Residents< 20

Inside the perimeter there were about 0.28 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
9 Sept 35.5 °C 15 % 42 km/h 0.0 mm Extreme 70
10 Sept 34.2 °C 13 % 51 km/h 0.0 mm Very extreme 84
11 Sept 33.7 °C 5 % 34 km/h 0.0 mm Very extreme 76
12 Sept 34.7 °C 4 % 37 km/h 0.0 mm Very extreme 91
13 Sept 34.1 °C 7 % 41 km/h 0.0 mm Very extreme 89
14 Sept 34.3 °C 14 % 25 km/h 0.0 mm Extreme 66
15 Sept 36.2 °C 11 % 27 km/h 0.0 mm Extreme 64
16 Sept 34.7 °C 13 % 54 km/h 0.0 mm Very extreme 95
17 Sept 34.2 °C 14 % 41 km/h 0.0 mm Very extreme 86
18 Sept 35.1 °C 14 % 20 km/h 0.0 mm Extreme 57
19 Sept 36.2 °C 10 % 41 km/h 0.0 mm Extreme 66
20 Sept 34.4 °C 16 % 53 km/h 0.0 mm Very extreme 88
21 Sept 32.9 °C 9 % 47 km/h 0.0 mm Very extreme 82
22 Sept 34.2 °C 7 % 46 km/h 0.0 mm Very extreme 91
23 Sept 34.9 °C 7 % 51 km/h 0.0 mm Very extreme 106
24 Sept 35.5 °C 8 % 45 km/h 0.0 mm Very extreme 85
25 Sept 35.1 °C 10 % 47 km/h 0.0 mm Very extreme 98
26 Sept 35.0 °C 10 % 48 km/h 0.0 mm Very extreme 86
27 Sept 35.0 °C 12 % 42 km/h 0.0 mm Very extreme 90
28 Sept 35.2 °C 15 % 36 km/h 0.0 mm Very extreme 77
29 Sept after 35.9 °C 16 % 42 km/h 0.0 mm Very extreme 88
30 Sept after 34.8 °C 11 % 50 km/h 0.0 mm Very extreme 100
1 Oct after 35.3 °C 11 % 51 km/h 0.0 mm Very extreme 90
2 Oct after 35.4 °C 15 % 41 km/h 0.0 mm Very extreme 84
3 Oct after 36.4 °C 15 % 35 km/h 0.0 mm Very extreme 77
4 Oct after 38.1 °C 14 % 36 km/h 0.0 mm Extreme 65
5 Oct after 37.8 °C 15 % 34 km/h 0.0 mm Extreme 58
6 Oct after 38.5 °C 14 % 35 km/h 0.0 mm Extreme 61
7 Oct after 38.5 °C 15 % 33 km/h 0.0 mm Very extreme 74
8 Oct after 37.6 °C 18 % 36 km/h 0.0 mm Very extreme 77

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 2 Sept 2018
After · 5 Oct 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 862Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Halls Creek fire last?
GWIS (Copernicus) dates it between 9 September 2018 and 28 September 2018: 20 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 29,845 hectares (298.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Halls Creek (29,716 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 36.2 °C, humidity dropped to 4 % and gusts hit 54 km/h. The fire danger index (FWI) reached 106, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 862 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.