Gorongosa fire, 8 October 2026 Gorongosa
The fire started on 8 October 2026 in Gorongosa, Mozambique, and satellites saw it burning for 16 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,568 hectares from heat detections, spread across a single municipality.
It is the 99th largest in Sofala since 2016 (of 214 with a page). Number 242 in Mozambique in 2026, of 532.
The power measured by the satellite is low (22.5 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.
Is it still active?
No detections since 23 Oct 2026, 11:49 UTC. That usually means no flame is visible from space any more, although hotspots may remain. Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.
- Burnt area
- 4,568ha
- GWIS perimeter (Copernicus)
- Duration
- 16days
- 8 Oct 2026 – 23 Oct 2026
- Municipalities hit
- 1
- districts
- Started on
- 8 Oct
- 2026
- Heat detections
- 73
- in a single hotspot: 22 MW
- Danger at start
- 0
- Very low · FWI index
- Energy released
- 387MW
- sum of detected power
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 0 days without rain (1 mm or more) when it started.
This area had burned before
81% of the perimeter overlaps earlier fires recorded since 2016: 737 ha in 2016, 2,862 ha in 2017, 1,495 ha in 2018, 1,509 ha in 2019, 596 ha in 2020, 358 ha in 2021, 2,530 ha in 2022, 25 ha in 2023, 133 ha in 2024, 666 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 3,686 ha that had burned before.
- 1,358 ha Gorongosa fire, September 2018 8,285 ha in total; the hectares shown are those it shares with this fire
- 230 ha Gorongosa fire, September 2020 3,322 ha in total; the hectares shown are those it shares with this fire
- 133 ha Gorongosa fire, August 2024 3,111 ha in total; the hectares shown are those it shares with this fire
- 129 ha Gorongosa fire, September 2022 8,858 ha in total; the hectares shown are those it shares with this fire
What happened to each town
-
Gorongosa where it started4,589 ha reached on 9 Oct0.7 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 8 Oct | 27.5 °C | 60 % | 32 km/h | 2.9 mm | Very low 0 |
| 9 Oct | 29.0 °C | 49 % | 27 km/h | 2.1 mm | Very low 0 |
| 10 Oct | 28.4 °C | 43 % | 40 km/h | 0.1 mm | Very low 3 |
| 11 Oct | 25.9 °C | 52 % | 39 km/h | 0.5 mm | Very low 4 |
| 12 Oct | 27.1 °C | 46 % | 29 km/h | 0.0 mm | Very low 4 |
| 13 Oct | 31.0 °C | 37 % | 21 km/h | 0.0 mm | Low 6 |
| 14 Oct | 30.8 °C | 35 % | 32 km/h | 0.0 mm | Low 8 |
| 15 Oct | 30.2 °C | 36 % | 28 km/h | 0.1 mm | Low 8 |
| 16 Oct | 30.2 °C | 31 % | 35 km/h | 0.0 mm | Low 10 |
| 17 Oct | 30.6 °C | 29 % | 25 km/h | 0.0 mm | Low 10 |
| 18 Oct | 32.4 °C | 28 % | 24 km/h | 0.0 mm | Moderate 12 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 16 October 2026 the air beside the fire reached 34 µg/m³ of PM2.5. That day averaged 21: 1.4 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 73Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 13,387 haGorongosa10 September 2025 · 16 days · 19 km away
- 11,928 haGorongosa8 September 2016 · 17 days · 20 km away
- 13,157 haGorongosa1 September 2023 · 12 days · 21 km away
- 59,348 haGorongosa20 August 2025 · 40 days · 22 km away
- 22,610 haGorongosa24 September 2021 · 9 days · 22 km away
- 19,369 haGorongosa29 September 2022 · 16 days · 28 km away
Frequently asked questions
- How long did the Gorongosa fire last?
- GWIS (Copernicus) dates it between 8 October 2026 and 23 October 2026: 16 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,568 hectares (45.7 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Gorongosa (4,589 ha, 0.7 %).
- Is the Gorongosa fire still active?
- No fire detections since 23 Oct 2026, 11:49 UTC. A lack of detections is not an official extinction.
- What was the weather like?
- During the fire the temperature reached 31.0 °C, humidity dropped to 29 % and gusts hit 40 km/h. The fire danger index (FWI) reached 10, class Low.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mozambique (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.