Gorongosa fire, 20 August 2025 Gorongosa, Gondola, Macossa
The fire started on 20 August 2025 in Gorongosa, Mozambique, and satellites saw it burning for 40 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 59,348 hectares from heat detections, spread across 3 municipalities.
It is the 6th largest in Sofala since 2016 (of 214 with a page). Number 5 in Mozambique in 2025, of 313.
Compare with…
- Burnt area
- 59,348ha
- GWIS perimeter (Copernicus)
- Duration
- 40days
- 20 Aug 2025 – 28 Sept 2025
- Municipalities hit
- 3
- districts
- Started on
- 20 Aug
- 2025
- Heat detections
- 3,278
- in a single hotspot: 112 MW
- Danger at start
- 26
- High · FWI index
- Average daily power
- 799MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 22 days without rain (1 mm or more) when it started. Rain came after the fire: 5.9 mm on 30 Sept.
This area had burned before
85% of the perimeter overlaps earlier fires recorded since 2016: 16,181 ha in 2016, 12,991 ha in 2017, 17,108 ha in 2018, 18,068 ha in 2019, 11,680 ha in 2020, 22,039 ha in 2021, 30,416 ha in 2022, 22,956 ha in 2023, 17,152 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 50,319 ha that had burned before.
- 15,953 ha Gorongosa fire, September 2021 22,610 ha in total; the hectares shown are those it shares with this fire
- 15,457 ha Gorongosa fire, September 2022 19,369 ha in total; the hectares shown are those it shares with this fire
- 10,481 ha Gorongosa fire, September 2023 13,157 ha in total; the hectares shown are those it shares with this fire
- 6,889 ha Gorongosa fire, September 2016 11,928 ha in total; the hectares shown are those it shares with this fire
- 4,581 ha Gorongosa fire, August 2018 9,955 ha in total; the hectares shown are those it shares with this fire
- 4,448 ha Gorongosa fire, September 2020 5,054 ha in total; the hectares shown are those it shares with this fire
- 3,762 ha Gorongosa fire, August 2019 4,532 ha in total; the hectares shown are those it shares with this fire
- 3,380 ha Gorongosa fire, September 2020 5,262 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Gorongosa where it started56,283 ha reached on 20 Aug8.3 %
-
2,638 ha reached on 24 Aug1.0 %
-
785 ha reached on 20 Aug0.1 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2025Inside the perimeter there were about 51 hectares of built-up land and about 10,000 residents (GHSL 2025, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 20 Aug | 28.7 °C | 29 % | 23 km/h | 0.0 mm | High 26 |
| 21 Aug | 29.3 °C | 29 % | 26 km/h | 0.0 mm | High 28 |
| 22 Aug | 30.5 °C | 26 % | 22 km/h | 0.0 mm | High 30 |
| 23 Aug | 32.9 °C | 21 % | 25 km/h | 0.0 mm | High 34 |
| 24 Aug | 33.7 °C | 18 % | 24 km/h | 0.0 mm | Very high 38 |
| 25 Aug | 32.9 °C | 25 % | 27 km/h | 0.0 mm | Very high 41 |
| 26 Aug | 33.0 °C | 23 % | 24 km/h | 0.0 mm | Very high 41 |
| 27 Aug | 31.0 °C | 25 % | 23 km/h | 0.0 mm | Very high 39 |
| 28 Aug | 29.2 °C | 30 % | 29 km/h | 0.0 mm | High 34 |
| 29 Aug | 30.8 °C | 31 % | 26 km/h | 0.0 mm | High 35 |
| 30 Aug | 32.2 °C | 27 % | 22 km/h | 0.0 mm | High 34 |
| 31 Aug | 32.6 °C | 26 % | 30 km/h | 0.0 mm | High 38 |
| 1 Sept | 31.2 °C | 25 % | 37 km/h | 0.0 mm | Very high 42 |
| 2 Sept | 27.3 °C | 47 % | 36 km/h | 0.6 mm | High 30 |
| 3 Sept | 30.3 °C | 37 % | 27 km/h | 0.0 mm | High 26 |
| 4 Sept | 33.1 °C | 24 % | 34 km/h | 0.0 mm | Very high 40 |
| 5 Sept | 30.7 °C | 41 % | 22 km/h | 0.0 mm | High 30 |
| 6 Sept | 35.0 °C | 21 % | 40 km/h | 0.0 mm | Extreme 50 |
| 7 Sept | 30.8 °C | 39 % | 28 km/h | 0.0 mm | High 35 |
| 8 Sept | 30.6 °C | 38 % | 27 km/h | 0.0 mm | High 34 |
| 9 Sept | 30.5 °C | 36 % | 32 km/h | 0.0 mm | High 36 |
| 10 Sept | 30.1 °C | 44 % | 28 km/h | 0.0 mm | High 29 |
| 11 Sept | 31.0 °C | 37 % | 30 km/h | 0.0 mm | High 30 |
| 12 Sept | 31.7 °C | 32 % | 32 km/h | 0.0 mm | High 33 |
| 13 Sept | 30.8 °C | 28 % | 28 km/h | 0.0 mm | High 33 |
| 14 Sept | 32.2 °C | 22 % | 30 km/h | 0.0 mm | Very high 40 |
| 15 Sept | 30.8 °C | 30 % | 26 km/h | 0.0 mm | High 37 |
| 16 Sept | 34.3 °C | 21 % | 28 km/h | 0.0 mm | Very high 38 |
| 17 Sept | 36.1 °C | 23 % | 35 km/h | 0.0 mm | Very high 46 |
| 18 Sept | 32.3 °C | 43 % | 31 km/h | 0.0 mm | High 35 |
| 19 Sept | 32.2 °C | 37 % | 37 km/h | 0.0 mm | Very high 38 |
| 20 Sept | 29.8 °C | 41 % | 40 km/h | 0.5 mm | High 36 |
| 21 Sept | 29.3 °C | 39 % | 32 km/h | 0.4 mm | High 32 |
| 22 Sept | 32.2 °C | 31 % | 23 km/h | 0.0 mm | High 32 |
| 23 Sept | 35.9 °C | 28 % | 41 km/h | 0.0 mm | Very high 45 |
| 24 Sept | 33.6 °C | 41 % | 28 km/h | 0.0 mm | High 36 |
| 25 Sept | 28.5 °C | 59 % | 41 km/h | 2.4 mm | Moderate 11 |
| 26 Sept | 26.1 °C | 63 % | 36 km/h | 1.3 mm | Low 10 |
| 27 Sept | 26.7 °C | 59 % | 31 km/h | 1.6 mm | Low 9 |
| 28 Sept | 32.5 °C | 39 % | 24 km/h | 0.0 mm | High 22 |
| 29 Sept after | 31.9 °C | 46 % | 38 km/h | 0.0 mm | High 29 |
| 30 Sept after | 23.4 °C | 71 % | 39 km/h | 5.9 mm | Very low 3 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 29 August 2025 the air beside the fire reached 200 µg/m³ of PM2.5. That day averaged 92: 6.1 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 3,278Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Gorongosa fire last?
- GWIS (Copernicus) dates it between 20 August 2025 and 28 September 2025: 40 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 59,348 hectares (593.5 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 3 municipalities: Gorongosa (56,283 ha, 8.3 %); Gondola (2,638 ha, 1.0 %); Macossa (785 ha, 0.1 %).
- What was the weather like?
- During the fire the temperature reached 36.1 °C, humidity dropped to 18 % and gusts hit 41 km/h. The fire danger index (FWI) reached 50, class Extreme.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mozambique (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 3,278 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.