Gilé fire, 8 September 2017 Gilé
The fire started on 8 September 2017 in Gilé, Mozambique, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,042 hectares from heat detections, spread across a single municipality.
It is the 815th largest in Zambézia since 2016 (of 842 with a page). Number 189 in Mozambique in 2017, of 196.
Compare with…
Suggestions: Gilé · 2026Gilé · 2018Alto Molocue · 2022Gilé · 2022
- Burnt area
- 3,042ha
- GWIS perimeter (Copernicus)
- Duration
- 9days
- 8 Sept 2017 – 16 Sept 2017
- Municipalities hit
- 1
- districts
- Started on
- 8 Sept
- 2017
- Heat detections
- 121
- in a single hotspot: 50 MW
- Danger at start
- 30
- High · FWI index
- Average daily power
- 143MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 19 days without rain (1 mm or more) when it started.
This area had burned before
37% of the perimeter overlaps earlier fires recorded since 2016: 1,139 ha in 2016.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Gilé where it started3,058 ha reached on 8 Sept0.3 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 8 Sept | 31.3 °C | 26 % | 30 km/h | 0.0 mm | High 30 |
| 9 Sept | 31.2 °C | 26 % | 37 km/h | 0.0 mm | High 34 |
| 10 Sept | 30.4 °C | 29 % | 35 km/h | 0.0 mm | High 34 |
| 11 Sept | 30.5 °C | 33 % | 33 km/h | 0.0 mm | High 34 |
| 12 Sept | 30.5 °C | 35 % | 34 km/h | 0.0 mm | High 32 |
| 13 Sept | 31.6 °C | 28 % | 31 km/h | 0.0 mm | High 32 |
| 14 Sept | 32.5 °C | 23 % | 27 km/h | 0.0 mm | High 35 |
| 15 Sept | 31.8 °C | 19 % | 30 km/h | 0.0 mm | Very high 39 |
| 16 Sept | 31.4 °C | 27 % | 26 km/h | 0.0 mm | High 35 |
| 17 Sept after | 33.5 °C | 22 % | 33 km/h | 0.0 mm | Very high 40 |
| 18 Sept after | 32.1 °C | 33 % | 29 km/h | 0.0 mm | High 36 |
| 19 Sept after | 32.2 °C | 36 % | 34 km/h | 0.0 mm | High 34 |
| 20 Sept after | 32.7 °C | 33 % | 35 km/h | 0.0 mm | High 37 |
| 21 Sept after | 29.7 °C | 44 % | 35 km/h | 0.0 mm | High 31 |
| 22 Sept after | 30.8 °C | 37 % | 33 km/h | 0.0 mm | High 30 |
| 23 Sept after | 32.7 °C | 25 % | 31 km/h | 0.0 mm | High 37 |
| 24 Sept after | 28.7 °C | 40 % | 33 km/h | 0.0 mm | High 30 |
| 25 Sept after | 29.7 °C | 41 % | 23 km/h | 0.0 mm | High 28 |
| 26 Sept after | 34.2 °C | 26 % | 34 km/h | 0.0 mm | High 36 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 121Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 116,749 haGilé18 August 2026 · 43 days · 16 km away
- 31,968 haGilé13 September 2018 · 17 days · 16 km away
- 32,621 haAlto Molocue29 September 2022 · 13 days · 29 km away
- 90,638 haGilé27 September 2022 · 18 days · 31 km away
- 70,839 haGilé8 September 2024 · 14 days · 34 km away
- 63,932 haRibaué9 September 2016 · 22 days · 37 km away
Frequently asked questions
- How long did the Gilé fire last?
- GWIS (Copernicus) dates it between 8 September 2017 and 16 September 2017: 9 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,042 hectares (30.4 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Gilé (3,058 ha, 0.3 %).
- What was the weather like?
- During the fire the temperature reached 32.5 °C, humidity dropped to 19 % and gusts hit 37 km/h. The fire danger index (FWI) reached 39, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mozambique (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 121 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.