Skip to content
worldfires
AU · Australia · –

East Pilbara fire, 11 January 2026 East Pilbara

Out · last detection 23 Jan 2026, 04:56 UTC

The fire started on 11 January 2026 in East Pilbara, Australia, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 51,313 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
51,313ha
GWIS perimeter (Copernicus)
Duration
12days
11 Jan 2026 – 22 Jan 2026
Municipalities hit
1
local government areas
Started on
11 Jan
2026
Heat detections
1,227
in a single hotspot: 502 MW
Danger at start
65
Extreme · FWI index
Average daily power
2.7GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 11 Jan22 Jan
23 Jan 2026

How it evolved, day by day

11 Jan 2026 · 1,113 MW · 20 12 Jan 2026 · 196 MW · 39 13 Jan 2026 · 910 MW · 76 14 Jan 2026 · 890 MW · 80 15 Jan 2026 · 24,212 MW · 406 16 Jan 2026 · 374 MW · 60 17 Jan 2026 · 405 MW · 38 18 Jan 2026 · 168 MW · 47 19 Jan 2026 · 1,581 MW · 144 20 Jan 2026 · 3,371 MW · 165 21 Jan 2026 · 684 MW · 78 22 Jan 2026 · 902 MW · 71 23 Jan 2026 · 677 MW · 3
11 Jan 15 Jan 20 Jan 23 Jan

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (31 passes) and with what wind. Watch the film

The weather it burned in

44°high
57km/h · peak gust
8%lowest humidity

It had gone 30 days without rain (1 mm or more) when it started. Rain came after the fire: 2.2 mm on 23 Jan.

This area had burned before

19% of the perimeter overlaps earlier fires recorded since 2016: 2,129 ha in 2017, 7,060 ha in 2019, 679 ha in 2023, 728 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 9,925 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 32% of the area of London (513 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Pilbara where it started
    51,557 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
11 Jan 42.7 °C 15 % 35 km/h 0.0 mm Extreme 65
12 Jan 43.5 °C 12 % 53 km/h 0.0 mm Very extreme 76
13 Jan 43.0 °C 13 % 35 km/h 0.0 mm Extreme 59
14 Jan 44.1 °C 12 % 36 km/h 0.0 mm Extreme 59
15 Jan 44.3 °C 9 % 38 km/h 0.0 mm Very extreme 85
16 Jan 42.1 °C 13 % 57 km/h 0.0 mm Very extreme 85
17 Jan 42.3 °C 15 % 37 km/h 0.0 mm Very extreme 76
18 Jan 43.5 °C 13 % 34 km/h 0.0 mm Very extreme 70
19 Jan 43.7 °C 9 % 39 km/h 0.0 mm Very extreme 72
20 Jan 44.1 °C 9 % 47 km/h 0.0 mm Very extreme 98
21 Jan 42.5 °C 8 % 50 km/h 0.0 mm Very extreme 95
22 Jan 41.8 °C 8 % 37 km/h 0.0 mm Very extreme 72
23 Jan after 41.5 °C 19 % 53 km/h 2.2 mm Very extreme 70

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 4 Jan 2026
After · 29 Jan 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 12 January 2026 the air beside the fire reached 31 µg/m³ of PM2.5. That day averaged 19: 1.3 times the WHO daily guideline (15).

PM2.5 peak31 µg/m³
Days over the guideline1 day
PM1040 µg/m³
Optical depth0.47
9 Jan13 Jan17 Jan21 Jan25 Jan
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,227Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Pilbara fire last?
GWIS (Copernicus) dates it between 11 January 2026 and 22 January 2026: 12 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 51,313 hectares (513.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Pilbara (51,557 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 44.3 °C, humidity dropped to 8 % and gusts hit 57 km/h. The fire danger index (FWI) reached 98, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 1,227 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.