Skip to content
worldfires
AU · Australia · –

East Pilbara fire, 31 January 2025 East Pilbara

Out · last detection 2 Feb 2025, 05:47 UTC

The fire started on 31 January 2025 in East Pilbara, Australia, and satellites saw it burning for 3 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,848 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
6,848ha
GWIS perimeter (Copernicus)
Duration
3days
31 Jan 2025 – 2 Feb 2025
Municipalities hit
1
local government areas
Started on
31 Jan
2025
Heat detections
217
in a single hotspot: 191 MW
Danger at start
82
Very extreme · FWI index
Average daily power
3.5GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 31 Jan2 Feb
2 Feb 2025

How it evolved, day by day

31 Jan 2025 · 238 MW · 17 1 Feb 2025 · 9,918 MW · 183 2 Feb 2025 · 377 MW · 17
31 Jan 1 Feb 2 Feb

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

45°high
48km/h · peak gust
9%lowest humidity

It had gone 15 days without rain (1 mm or more) when it started.

This area had burned before

6% of the perimeter overlaps earlier fires recorded since 2016: 157 ha in 2017, 265 ha in 2023.

How big is it?

10 km
It burned the equivalent of 4.3% of the area of London (68 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Pilbara where it started
    6,895 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Very dry air: 28 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
31 Jan 43.1 °C 12 % 47 km/h 0.0 mm Very extreme 82
1 Feb 44.1 °C 11 % 48 km/h 0.0 mm Very extreme 83
2 Feb 45.1 °C 9 % 37 km/h 0.0 mm Very extreme 82
3 Feb after 42.8 °C 14 % 26 km/h 0.0 mm Extreme 56
4 Feb after 42.4 °C 13 % 37 km/h 0.0 mm Extreme 59
5 Feb after 41.9 °C 13 % 47 km/h 0.0 mm Very extreme 94
6 Feb after 42.1 °C 14 % 49 km/h 0.0 mm Very extreme 93
7 Feb after 41.0 °C 18 % 50 km/h 0.0 mm Very extreme 92
8 Feb after 41.3 °C 17 % 45 km/h 0.0 mm Very extreme 81
9 Feb after 41.4 °C 18 % 35 km/h 0.0 mm Very extreme 70
10 Feb after 41.1 °C 18 % 38 km/h 0.0 mm Very extreme 71
11 Feb after 41.1 °C 19 % 40 km/h 0.0 mm Extreme 68
12 Feb after 38.6 °C 28 % 38 km/h 0.0 mm Extreme 55

Its twins: fires that started in the same weather

It started with an FWI of 81.7, a minimum humidity of 12% and 15 days without rain. Fires in the area that started in weather like this since 2017: 5.

FWI at the start 81.7
Minimum humidity 12 %
Days without rain 15
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

MacDonnell fire, November 2017
5,921 ha 4 days FWI 81.5 Min. humidity 5 % 232 km away, in 2017

First rain (1 mm or more) after it ended: 1.9 mm on 11 Nov.

What happened to them

Fires in the area that started in similar weather: 5. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
48km/h · max. gust

It was considered over on 2 Feb, and not even 1 mm fell in the following ten days: it went out without rain.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2017.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 24 Jan 2025
After · 9 Feb 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 31 January 2025 the air beside the fire reached 43 µg/m³ of PM2.5. That day averaged 24: 1.6 times the WHO daily guideline (15).

PM2.5 peak43 µg/m³
Days over the guideline1 day
PM1054 µg/m³
Optical depth1.16
29 Jan31 Jan2 Feb4 Feb
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 217Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Pilbara fire last?
GWIS (Copernicus) dates it between 31 January 2025 and 2 February 2025: 3 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,848 hectares (68.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Pilbara (6,895 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 45.1 °C, humidity dropped to 9 % and gusts hit 48 km/h. The fire danger index (FWI) reached 83, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 217 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.