Skip to content
worldfires
AU · Australia · –

East Pilbara fire, 11 January 2026 East Pilbara

Out · last detection

The fire started on in East Pilbara, Australia, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 15,861 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
15,861ha
GWIS perimeter (Copernicus)
Duration
6days
11 Jan 2026 – 16 Jan 2026
Municipalities hit
1
local government areas
Started on
11 Jan
2026
Heat detections
383
in a single hotspot: 281 MW
Danger at start
68
Extreme · FWI index
Average daily power
1.9GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 11 Jan16 Jan
16 Jan 2026

How it evolved, day by day

11 Jan 2026 · 4,479 MW · 61 12 Jan 2026 · 2,836 MW · 126 13 Jan 2026 · 2,627 MW · 134 14 Jan 2026 · 1,409 MW · 55 15 Jan 2026 · 20 MW · 6 16 Jan 2026 · 5 MW · 1
11 Jan 13 Jan 15 Jan

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (13 passes) and with what wind. Watch the film

The weather it burned in

45°high
58km/h · peak gust
9%lowest humidity

It had gone 56 days without rain (1 mm or more) when it started. Rain came after the fire: 1.1 mm on 23 Jan.

This area had burned before

4% of the perimeter overlaps earlier fires recorded since 2016: 623 ha in 2025.

How big is it?

10 km
It burned the equivalent of 10% of the area of London (159 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Pilbara where it started
    15,957 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
11 Jan 43.2 °C 15 % 41 km/h 0.0 mm Extreme 68
12 Jan 43.9 °C 12 % 55 km/h 0.0 mm Very extreme 81
13 Jan 43.5 °C 12 % 27 km/h 0.0 mm Extreme 60
14 Jan 44.6 °C 11 % 32 km/h 0.0 mm Extreme 62
15 Jan 45.0 °C 9 % 41 km/h 0.0 mm Very extreme 86
16 Jan 42.8 °C 13 % 58 km/h 0.0 mm Very extreme 85
17 Jan after 42.8 °C 14 % 41 km/h 0.0 mm Very extreme 80
18 Jan after 44.0 °C 13 % 33 km/h 0.0 mm Very extreme 73
19 Jan after 44.3 °C 9 % 40 km/h 0.0 mm Very extreme 75
20 Jan after 44.7 °C 8 % 48 km/h 0.0 mm Very extreme 100
21 Jan after 42.6 °C 8 % 50 km/h 0.0 mm Very extreme 95
22 Jan after 42.1 °C 7 % 38 km/h 0.0 mm Very extreme 74
23 Jan after 42.0 °C 18 % 56 km/h 1.1 mm Very extreme 74

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 4 Jan 2026
After · 23 Jan 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 12 January 2026 the air beside the fire reached 57 µg/m³ of PM2.5. That day averaged 28: 1.9 times the WHO daily guideline (15).

PM2.5 peak57 µg/m³
Days over the guideline2 days
PM1065 µg/m³
Optical depth0.51
9 Jan12 Jan15 Jan18 Jan
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 383Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Pilbara fire last?
GWIS (Copernicus) dates it between 11 January 2026 and 16 January 2026: 6 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 15,861 hectares (158.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Pilbara (15,957 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 45.0 °C, humidity dropped to 9 % and gusts hit 58 km/h. The fire danger index (FWI) reached 86, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 383 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.