Coyuca de Catalán fire, 18 May 2022
Coyuca de Catalán
Out · last detection 27 May 2022, 19:42 UTC
The fire started on 18 May 2022 in Coyuca de Catalán, Mexico, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,949 hectares from heat detections, spread across a single municipality.
It is the 407th largest in Guerrero since 2016 (of 582 with a page). Number 158 in Mexico in 2022, of 232.
The power measured by the satellite is low (18.0 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.
matches the official recordwith caveatssatellite onlymodel
When copying, the sentence is
Tick the figures you want: they make up the lede and the CSV.
Burned area
with caveats
1,949ha
Perimeter published by GWIS (Copernicus).
This page1,949CONAFOR678
Source
GWIS (Copernicus)
Date
18 May 2022 – 27 May 2022
+− cross-check
CONAFOR: 678 ha (matched records: 1). Difference between the page and the official record: +187.5%. Matched on 15 November 2026. The two figures differ a lot, so these may not be exactly the same fire: take them as nearby records.
Duration by satellite
satellite only
10days
18 May 2022 to 27 May 2022: first and last day with fire on the page.
Source
GWIS (Copernicus) · NASA FIRMS · VIIRS
Date
last detection: 27 May 2022, 19:42 UTC
+− cross-check
Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.
Start
satellite only
18 May 2022
First day with fire seen by the satellites or the perimeter.
Source
GWIS (Copernicus) · NASA FIRMS · VIIRS
Date
18 May 2022
+− cross-check
The two figures differ a lot, so these may not be exactly the same fire: take them as nearby records.
Hotspots
satellite only
100
VIIRS detections at 375 m. Most intense hotspot: 18 MW.
Source
NASA FIRMS · VIIRS (Suomi NPP)
Date
18 May 2022 – 27 May 2022
+− cross-check
There is no official record to compare with. Each hotspot is a pixel detected in one satellite pass, not a separate fire.
The worst day
satellite only
187MW
Total radiative power on 20 May 2022; hotspots that day: 36.
Source
NASA FIRMS · VIIRS (FRP)
Date
20 May 2022
+− cross-check
Fire radiative power (FRP) measures the energy the fire gives off when the satellite passes. Added up by day, it compares intensity, not area.
Danger at the start
model
34.1FWI · high
Fire Weather Index (Canadian system) computed by WorldFires for the day the fire started. Consecutive days without rain before: 3.
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings ›
Weather during the fire
model
27.7°C · 14% RH
High of 27.7 °C and minimum humidity of 14% on 19 May 2022; gusts of 40 km/h on 19 May 2022.
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
ⓘThis page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
· reconstructedofficial
Matched with the official CONAFOR record
Nearby records with very different figures: 678 ha (records: 1).
A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
28°high
40km/h · peak gust
14%lowest humidity
It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 1.0 mm on 28 May.
This area had burned before
99% of the perimeter overlaps earlier fires recorded since 2016: 1,762 ha in 2017, 599 ha in 2019, 1,347 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 1,921 ha that had burned before.
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2020
Built-up area< 0.1ha
Residents< 20
Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
According to CONAFOR, this fire started on 18 May 2022 and burned 678 ha (the satellite measured 1,949 ha). The two figures differ a lot, so these may not be exactly the same fire: take them as nearby records.
Coyuca de CatalánEl Cundán Chiquito18 May 2022678 ha· extinguished on 25 May 2022· cause: arson
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
Day
High
Min. humidity
Peak gust
Rain
Danger (FWI)
18 May
26.8 °C
22 %
36 km/h
0.0 mm
High 34
19 May
27.7 °C
14 %
40 km/h
0.0 mm
Very high 40
20 May
27.0 °C
17 %
32 km/h
0.0 mm
Very high 39
21 May
26.9 °C
29 %
32 km/h
0.1 mm
High 35
22 May
26.6 °C
36 %
33 km/h
0.5 mm
High 28
23 May
25.7 °C
43 %
31 km/h
5.5 mm
High 28
24 May
24.8 °C
44 %
32 km/h
3.4 mm
Very low 3
25 May
27.3 °C
31 %
35 km/h
0.0 mm
Low 5
26 May
26.1 °C
38 %
31 km/h
0.6 mm
Moderate 13
27 May
25.7 °C
34 %
35 km/h
5.5 mm
Very low 4
28 May after
23.5 °C
43 %
35 km/h
1.0 mm
Low 6
Its twins: fires that started in the same weather
It started with an FWI of 34.1, a minimum humidity of 22% and 3 days without rain. Fires in the area that started in weather like this since 2016: 23.
FWI at the start34.1
Minimum humidity22 %
Days without rain3
this firechosen twinsrest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Coyuca de Catalán fire, 18 May 2022
1,949 ha10 daysFWI 34.1Min. humidity 22 %
Ajuchitlán del Progreso fire, April 2023
2,481 ha14 daysFWI 33.5Min. humidity 22 %48 km away, in 2023
First rain (1 mm or more) after it ended: 1.0 mm on 13 May.
It burned an area similar to its twins (1,949 ha against a median of 2,481 ha) and lasted 10 days, against 12 days.
In 7 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.4 mm.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
1.0 mmfirst rain
28 Maythe day after it ended
40km/h · max. gust
It was considered over on 27 May, and on 28 May 1.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 16 of 23, with a median of 2.4 mm.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
Same area: fires that have already ended, less than 250 km from this one, since 2016.
Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
They are sorted by similarity, and the outlines of the first five are drawn.
According to the heat detections seen by satellite inside the perimeter, it burned from 18 May 2022 to 27 May 2022 (10 days). The perimeter dates it from 18 May 2022 to 25 May 2022.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,949 hectares (19.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Coyuca de Catalán (1,958 ha, 0.6 %).
What was the weather like?
During the fire the temperature reached 27.7 °C, humidity dropped to 14 % and gusts hit 40 km/h. The fire danger index (FWI) reached 40, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mexico (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 23. Their median duration was 12 days and their median area 2,481 ha; 100 % went past 1,000 ha. In 7 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.4 mm.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
⚑Report an errorHow we know this›
Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
Dates adjusted with the VIIRS detections inside the perimeter, which said 18 May 2022 to 25 May 2022. 100 Suomi-NPP VIIRS detections on those dates.
Compared with CONAFOR: 678 official ha against 1,949 ha of perimeter; similar, but with reservations.
Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.