Skip to content
worldfires
BR · Brazil · –

Colniza fire, 16 August 2020 Colniza

Out · last detection 2 Sept 2020, 06:08 UTC

The fire started on 16 August 2020 in Colniza, Brazil, and satellites saw it burning for 18 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,178 hectares from heat detections, spread across a single municipality.

It is the 1262th largest in Mato Grosso since 2016 (of 1872 with a page). Number 622 in Brazil in 2020, of 957.

Burnt area
4,178ha
GWIS perimeter (Copernicus)
Duration
18days
16 Aug 2020 – 2 Sept 2020
Municipalities hit
1
municipalities
Started on
16 Aug
2020
Heat detections
579
in a single hotspot: 365 MW
Danger at start
36
High · FWI index
Average daily power
495MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 16 Aug2 Sept
2 Sept 2020

How it evolved, day by day

16 Aug 2020 · 893 MW · 22 17 Aug 2020 · 723 MW · 69 18 Aug 2020 · 2,884 MW · 115 19 Aug 2020 · 2,737 MW · 128 20 Aug 2020 · 237 MW · 71 21 Aug 2020 · 322 MW · 39 22 Aug 2020 · 133 MW · 38 23 Aug 2020 · 14 MW · 7 24 Aug 2020 · 619 MW · 28 25 Aug 2020 · 38 MW · 12 26 Aug 2020 · 150 MW · 15 27 Aug 2020 · 7 MW · 4 28 Aug 2020 · 14 MW · 2 29 Aug 2020 · 29 MW · 4 30 Aug 2020 · 10 MW · 8 31 Aug 2020 · 77 MW · 8 1 Sept 2020 · 26 MW · 5 2 Sept 2020 · 5 MW · 4
18 Aug 24 Aug 28 Aug 1 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
44km/h · peak gust
20%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 1.0 mm on 10 Sept.

This area had burned before

48% of the perimeter overlaps earlier fires recorded since 2016: 512 ha in 2018, 1,880 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 2,001 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.6% of the area of London (42 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Colniza where it started
    4,204 ha reached on 16 Aug
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
16 Aug 37.4 °C 27 % 28 km/h 0.0 mm High 36
17 Aug 39.0 °C 20 % 24 km/h 0.0 mm Very high 39
18 Aug 37.1 °C 27 % 34 km/h 0.0 mm Very high 41
19 Aug 36.8 °C 32 % 33 km/h 0.0 mm Very high 39
20 Aug 34.7 °C 41 % 35 km/h 0.4 mm High 37
21 Aug 23.9 °C 48 % 44 km/h 0.0 mm High 30
22 Aug 27.6 °C 39 % 32 km/h 0.0 mm High 27
23 Aug 32.3 °C 37 % 21 km/h 0.0 mm High 27
24 Aug 33.6 °C 37 % 26 km/h 0.0 mm High 28
25 Aug 35.0 °C 35 % 25 km/h 0.0 mm High 30
26 Aug 35.0 °C 40 % 22 km/h 0.0 mm High 29
27 Aug 36.0 °C 36 % 20 km/h 0.0 mm High 29
28 Aug 35.5 °C 40 % 27 km/h 1.3 mm Moderate 21
29 Aug 35.1 °C 42 % 22 km/h 0.0 mm High 23
30 Aug 35.2 °C 46 % 27 km/h 0.0 mm High 25
31 Aug 34.9 °C 39 % 34 km/h 0.1 mm High 26
1 Sept 37.5 °C 27 % 25 km/h 0.0 mm High 36
2 Sept 35.5 °C 29 % 24 km/h 0.0 mm High 34
3 Sept after 36.8 °C 25 % 20 km/h 0.0 mm High 34
4 Sept after 36.6 °C 29 % 22 km/h 0.0 mm High 37
5 Sept after 37.4 °C 25 % 29 km/h 0.0 mm High 37
6 Sept after 37.4 °C 23 % 25 km/h 0.0 mm Very high 38
7 Sept after 38.6 °C 19 % 19 km/h 0.0 mm Very high 39
8 Sept after 38.1 °C 22 % 23 km/h 0.0 mm Very high 43
9 Sept after 35.4 °C 37 % 29 km/h 0.0 mm High 34
10 Sept after 36.2 °C 40 % 24 km/h 1.0 mm High 27

Its twins: fires that started in the same weather

It started with an FWI of 35.6, a minimum humidity of 27% and more than two months without rain. Fires in the area that started in weather like this since 2016: 28.

FWI at the start 35.6
Minimum humidity 27 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Aripuanã fire, August 2024
16,987 ha 33 days FWI 35.9 Min. humidity 27 % 98 km away, in 2024

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

17 days
median duration
4,576 ha
median area
11 %
went past 10,000 ha
3.9 mm
rain at the end (median; 17 of 28 had it)

It burned an area similar to its twins (4,178 ha against a median of 4,576 ha) and lasted 18 days, against 17 days.

In 11 of 28, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.9 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.0 mmfirst rain
10 Sept8 days after it ended
44km/h · max. gust

It was considered over on 2 Sept, and on 10 Sept 1.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 17 of 28, with a median of 3.9 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 9 Aug 2020
After · 9 Sept 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 579Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Colniza fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 16 August 2020 to 2 September 2020 (18 days). The perimeter dates it from 16 August 2020 to 26 August 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,178 hectares (41.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Colniza (4,204 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 39.0 °C, humidity dropped to 20 % and gusts hit 44 km/h. The fire danger index (FWI) reached 41, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 28. Their median duration was 17 days and their median area 4,576 ha; 11 % went past 10,000 ha. In 11 of 28, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.9 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 26 August 2020 → 2 September 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 16 August 2020 to 26 August 2020. 579 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.