Skip to content
worldfires
BR · Brazil · –

Colniza fire, 14 August 2021 Colniza

Out · last detection 28 Aug 2021, 17:54 UTC

The fire started on 14 August 2021 in Colniza, Brazil, and satellites saw it burning for 15 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,391 hectares from heat detections, spread across a single municipality.

It is the 938th largest in Mato Grosso since 2016 (of 1872 with a page). Number 365 in Brazil in 2021, of 814.

Burnt area
5,391ha
GWIS perimeter (Copernicus)
Duration
15days
14 Aug 2021 – 28 Aug 2021
Municipalities hit
1
municipalities
Started on
14 Aug
2021
Heat detections
675
in a single hotspot: 363 MW
Danger at start
39
Very high · FWI index
Average daily power
742MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Aug28 Aug
28 Aug 2021

How it evolved, day by day

14 Aug 2021 · 4,647 MW · 62 15 Aug 2021 · 998 MW · 139 16 Aug 2021 · 1,027 MW · 94 17 Aug 2021 · 554 MW · 109 18 Aug 2021 · 1,087 MW · 52 19 Aug 2021 · 959 MW · 81 20 Aug 2021 · 217 MW · 31 21 Aug 2021 · 63 MW · 18 22 Aug 2021 · 132 MW · 13 23 Aug 2021 · 277 MW · 26 24 Aug 2021 · 154 MW · 26 25 Aug 2021 · 151 MW · 9 26 Aug 2021 · 102 MW · 12 28 Aug 2021 · 21 MW · 3
14 Aug 17 Aug 20 Aug 23 Aug 26 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
37km/h · peak gust
17%lowest humidity

It had gone 46 days without rain (1 mm or more) when it started. Rain came after the fire: 2.4 mm on 1 Sept.

This area had burned before

59% of the perimeter overlaps earlier fires recorded since 2016: 83 ha in 2016, 895 ha in 2017, 678 ha in 2018, 2,667 ha in 2019, 1,146 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 3,195 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.4% of the area of London (54 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Colniza where it started
    5,421 ha reached on 14 Aug
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Aug 34.1 °C 30 % 19 km/h 0.0 mm Very high 39
15 Aug 34.7 °C 32 % 26 km/h 0.0 mm High 36
16 Aug 35.9 °C 34 % 23 km/h 0.0 mm High 36
17 Aug 35.7 °C 28 % 24 km/h 0.0 mm High 35
18 Aug 36.8 °C 20 % 29 km/h 0.0 mm Very high 40
19 Aug 36.9 °C 17 % 21 km/h 0.0 mm Very high 42
20 Aug 35.2 °C 29 % 26 km/h 0.0 mm Very high 40
21 Aug 37.0 °C 22 % 27 km/h 0.0 mm High 37
22 Aug 36.6 °C 27 % 22 km/h 0.0 mm High 38
23 Aug 36.9 °C 19 % 27 km/h 0.0 mm Very high 41
24 Aug 36.2 °C 30 % 26 km/h 0.0 mm Very high 39
25 Aug 37.2 °C 32 % 37 km/h 0.0 mm Very high 40
26 Aug 38.1 °C 31 % 30 km/h 0.0 mm Very high 40
27 Aug 36.1 °C 31 % 22 km/h 0.0 mm High 37
28 Aug 35.8 °C 37 % 23 km/h 0.1 mm High 34
29 Aug after 33.1 °C 46 % 19 km/h 0.1 mm High 28
30 Aug after 33.6 °C 46 % 23 km/h 0.6 mm High 24
31 Aug after 34.4 °C 37 % 26 km/h 0.0 mm High 28
1 Sept after 32.6 °C 45 % 29 km/h 2.4 mm Moderate 12

Its twins: fires that started in the same weather

It started with an FWI of 39.1, a minimum humidity of 30% and 46 days without rain. Fires in the area that started in weather like this since 2016: 18.

FWI at the start 39.1
Minimum humidity 30 %
Days without rain 46
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Novo Aripuanã fire, July 2017
6,131 ha 22 days FWI 34.8 Min. humidity 30 % 90 km away, in 2017

First rain (1 mm or more) after it ended: 5.2 mm on 17 Aug.

What happened to them

17 days
median duration
3,890 ha
median area
6 %
went past 10,000 ha
2.8 mm
rain at the end (median; 15 of 18 had it)

It burned an area similar to its twins (5,391 ha against a median of 3,890 ha) and lasted 15 days, against 17 days.

In 3 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.4 mmfirst rain
1 Sept4 days after it ended
37km/h · max. gust

It was considered over on 28 Aug, and on 1 Sept 2.4 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 15 of 18, with a median of 2.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Aug 2021
After · 4 Sept 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 675Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Colniza fire last?
GWIS (Copernicus) dates it between 14 August 2021 and 28 August 2021: 15 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,391 hectares (53.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Colniza (5,421 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 38.1 °C, humidity dropped to 17 % and gusts hit 37 km/h. The fire danger index (FWI) reached 42, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 18. Their median duration was 17 days and their median area 3,890 ha; 6 % went past 10,000 ha. In 3 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 675 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.