Circular Head fire, 14 January 2016 Circular Head
The fire started on 14 January 2016 in Circular Head, Australia, and satellites saw it burning for 15 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 50,389 hectares from heat detections, spread across a single municipality.
It is the 3th largest in Tasmania since 2016 (of 17 with a page). Number 14 in Australia in 2016, of 427.
- Burnt area
- 50,389ha
- GWIS perimeter (Copernicus)
- Duration
- 15days
- 14 Jan 2016 – 28 Jan 2016
- Municipalities hit
- 1
- local government areas
- Started on
- 14 Jan
- 2016
- Heat detections
- 3,351
- in a single hotspot: 303 MW
- Danger at start
- 6
- Low · FWI index
- Energy released
- 35.5GW
- sum of detected power
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 2.7 mm on 14 Feb.
This area had burned before
No earlier perimeters overlap this fire since 2016, when the satellite record begins.
What happened to each town
-
Circular Head where it started50,580 ha reached on 14 Jan10 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 14 Jan | 18.3 °C | 55 % | 69 km/h | 1.0 mm | Low 6 |
| 15 Jan | 18.6 °C | 45 % | 44 km/h | 0.0 mm | Low 7 |
| 16 Jan | 24.0 °C | 43 % | 27 km/h | 0.0 mm | Low 8 |
| 17 Jan | 23.7 °C | 41 % | 44 km/h | 0.0 mm | Low 10 |
| 18 Jan | 27.5 °C | 39 % | 45 km/h | 0.5 mm | Moderate 12 |
| 19 Jan | 25.5 °C | 39 % | 36 km/h | 0.0 mm | Moderate 11 |
| 20 Jan | 22.8 °C | 46 % | 39 km/h | 0.0 mm | Moderate 11 |
| 21 Jan | 21.1 °C | 39 % | 45 km/h | 0.0 mm | Moderate 13 |
| 22 Jan | 21.3 °C | 46 % | 38 km/h | 0.3 mm | Moderate 12 |
| 23 Jan | 18.5 °C | 61 % | 48 km/h | 0.0 mm | Low 10 |
| 24 Jan | 21.0 °C | 51 % | 47 km/h | 0.1 mm | Low 10 |
| 25 Jan | 21.2 °C | 48 % | 39 km/h | 0.0 mm | Low 10 |
| 26 Jan | 19.8 °C | 57 % | 35 km/h | 1.2 mm | Very low 4 |
| 27 Jan | 21.3 °C | 52 % | 62 km/h | 0.2 mm | Moderate 11 |
| 28 Jan | 22.5 °C | 72 % | 52 km/h | 4.8 mm | Very low 1 |
| 29 Jan after | 18.7 °C | 85 % | 57 km/h | 14.3 mm | Very low 0 |
| 30 Jan after | 21.0 °C | 68 % | 55 km/h | 22.8 mm | Very low 0 |
| 31 Jan after | 22.8 °C | 65 % | 73 km/h | 5.2 mm | Very low 0 |
| 1 Feb after | 25.4 °C | 62 % | 35 km/h | 2.5 mm | Very low 0 |
| 2 Feb after | 24.1 °C | 62 % | 46 km/h | 0.0 mm | Very low 1 |
| 3 Feb after | 18.3 °C | 54 % | 62 km/h | 2.5 mm | Very low 1 |
| 4 Feb after | 22.2 °C | 46 % | 40 km/h | 0.0 mm | Very low 2 |
| 5 Feb after | 22.7 °C | 60 % | 26 km/h | 0.0 mm | Very low 2 |
| 6 Feb after | 23.9 °C | 53 % | 40 km/h | 0.0 mm | Very low 4 |
| 7 Feb after | 25.9 °C | 51 % | 36 km/h | 0.0 mm | Very low 5 |
| 8 Feb after | 21.4 °C | 52 % | 49 km/h | 0.0 mm | Low 6 |
| 9 Feb after | 25.6 °C | 48 % | 34 km/h | 0.0 mm | Low 6 |
| 10 Feb after | 21.9 °C | 53 % | 45 km/h | 0.0 mm | Low 7 |
| 11 Feb after | 22.4 °C | 43 % | 41 km/h | 0.0 mm | Low 7 |
| 12 Feb after | 24.0 °C | 45 % | 40 km/h | 0.0 mm | Low 8 |
| 13 Feb after | 23.1 °C | 49 % | 51 km/h | 0.7 mm | Low 7 |
| 14 Feb after | 16.8 °C | 55 % | 69 km/h | 2.7 mm | Very low 2 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 3,351Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Circular Head fire last?
- GWIS (Copernicus) dates it between 14 January 2016 and 28 January 2016: 15 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 50,389 hectares (503.9 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Circular Head (50,580 ha, 10 %).
- What was the weather like?
- During the fire the temperature reached 27.5 °C, humidity dropped to 39 % and gusts hit 73 km/h. The fire danger index (FWI) reached 13, class Moderate.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 000
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.