Skip to content
worldfires
MX · Mexico · –

Chilpancingo de los Bravo fire, May 2023 Chilpancingo de los Bravo

Out · last detection

The fire started on in Chilpancingo de los Bravo, Mexico, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,334 hectares from heat detections, spread across a single municipality.

It is number 195 by size of the 582 fires with a page that started in Guerrero since 2016. Number 89 in Mexico in 2023, of 285.

Burnt area
3,334ha
GWIS perimeter (Copernicus)
Duration
8days
14 May 2023 – 21 May 2023
Municipalities hit
1
municipalities
Started on
14 May
2023
Heat detections
121
in a single hotspot: 246 MW
Danger at start
38
High · FWI index
Average daily power
136MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 May21 May
21 May 2023

How it evolved, day by day

14 May 2023 · 12 MW · 3 15 May 2023 · 811 MW · 50 16 May 2023 · 79 MW · 7 17 May 2023 · 9 MW · 5 18 May 2023 · 52 MW · 9 19 May 2023 · 22 MW · 5 20 May 2023 · 45 MW · 18 21 May 2023 · 55 MW · 24
15 May 18 May 20 May

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
41km/h · peak gust
25%lowest humidity

It had gone 20 days without rain (1 mm or more) when it started. Rain came after the fire: 2.3 mm on 24 May.

This area had burned before

93% of the perimeter overlaps earlier fires recorded since 2016: 2,240 ha in 2018, 2,575 ha in 2019, 2,149 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 3,091 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.1% of the area of London (33 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Chilpancingo de los Bravo 283,354 inhabitants where it started
    3,350 ha reached on 14 May
    1.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
14 May 30.2 °C 32 % 41 km/h 1.4 mm High 38
15 May 32.5 °C 30 % 38 km/h 2.3 mm High 29
16 May 29.6 °C 35 % 33 km/h 0.0 mm Moderate 18
17 May 30.2 °C 39 % 32 km/h 3.1 mm High 28
18 May 30.7 °C 40 % 40 km/h 0.4 mm Moderate 13
19 May 29.6 °C 37 % 37 km/h 0.0 mm High 24
20 May 33.1 °C 25 % 33 km/h 0.1 mm High 34
21 May 31.4 °C 33 % 38 km/h 0.3 mm Very high 38
22 May after 31.2 °C 38 % 38 km/h 0.8 mm High 31
23 May after 29.9 °C 45 % 34 km/h 0.8 mm High 28
24 May after 29.6 °C 49 % 34 km/h 2.3 mm High 23

Its twins: fires that started in the same weather

It started with an FWI of 37.8, a minimum humidity of 32% and 20 days without rain. Fires in the area that started in weather like this since 2016: 28.

FWI at the start 37.8
Minimum humidity 32 %
Days without rain 20
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Chilpancingo de los Bravo fire, April 2022
3,574 ha 11 days FWI 36.2 Min. humidity 31 % 19 km away, in 2022

First rain (1 mm or more) after it ended: 5.4 mm on 19 Apr.

What happened to them

11 days
median duration
2,184 ha
median area
100 %
went past 1,000 ha
1.3 mm
rain at the end (median; 15 of 28 had it)

It was 1.5 times larger than the median of its twins and lasted 8 days, against 11 days.

Only 10 of its 28 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 13 of 28, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.3 mmfirst rain
24 May3 days after it ended
41km/h · max. gust

It was considered over on 21 May, and on 24 May 2.3 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 15 of 28, with a median of 1.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 May 2023
After · 28 May 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 16 May 2023 the air beside the fire reached 77 µg/m³ of PM2.5. That day averaged 45: 3.0 times the WHO daily guideline (15).

PM2.5 peak77 µg/m³
Days over the guideline12 days
PM10110 µg/m³
Optical depth1.17
12 May15 May18 May21 May24 May
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 121Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mexico

Frequently asked questions

How long did the Chilpancingo de los Bravo fire last?
GWIS (Copernicus) dates it between 14 May 2023 and 21 May 2023: 8 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,334 hectares (33.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Chilpancingo de los Bravo (3,350 ha, 1.5 %).
What was the weather like?
During the fire the temperature reached 33.1 °C, humidity dropped to 25 % and gusts hit 41 km/h. The fire danger index (FWI) reached 38, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mexico (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 28. Their median duration was 11 days and their median area 2,184 ha; 100 % went past 1,000 ha. Only 10 of its 28 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 13 of 28, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 121 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.