Skip to content
worldfires
MX · Mexico · –

Chilpancingo de los Bravo fire, 12 April 2018 Chilpancingo de los Bravo, Coyuca de Benítez

Out · last detection 1 May 2018, 19:23 UTC

The fire started on 12 April 2018 in Chilpancingo de los Bravo, Mexico, and satellites saw it burning for 20 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 11,320 hectares from heat detections, spread across 2 municipalities.

It is the 25th largest in Guerrero since 2016 (of 582 with a page). Number 14 in Mexico in 2018, of 233.

The power measured by the satellite is low (29.7 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
11,320ha
GWIS perimeter (Copernicus)
Duration
20days
12 Apr 2018 – 1 May 2018
Municipalities hit
2
municipalities
Started on
12 Apr
2018
Heat detections
715
in a single hotspot: 30 MW
Danger at start
0
Very low · FWI index
Average daily power
171MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Apr1 May
1 May 2018

How it evolved, day by day

12 Apr 2018 · 23 MW · 4 13 Apr 2018 · 122 MW · 36 14 Apr 2018 · 172 MW · 30 15 Apr 2018 · 301 MW · 50 16 Apr 2018 · 254 MW · 52 17 Apr 2018 · 196 MW · 34 18 Apr 2018 · 422 MW · 83 19 Apr 2018 · 293 MW · 95 20 Apr 2018 · 606 MW · 156 21 Apr 2018 · 520 MW · 123 22 Apr 2018 · 25 MW · 12 24 Apr 2018 · 51 MW · 8 26 Apr 2018 · 29 MW · 18 27 Apr 2018 · 2 MW · 1 28 Apr 2018 · 30 MW · 3 29 Apr 2018 · 12 MW · 5 30 Apr 2018 · 2 MW · 1 1 May 2018 · 12 MW · 4
12 Apr 16 Apr 20 Apr 26 Apr 30 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

29°high
42km/h · peak gust
37%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 16.7 mm on 2 May.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 7.1% of the area of London (113 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Chilpancingo de los Bravo 283,354 inhabitants where it started
    11,233 ha reached on 12 Apr
    5.1 %
  2. 148 ha reached on 21 Apr
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Apr 25.7 °C 48 % 33 km/h 15.9 mm Very low 0
13 Apr 24.6 °C 50 % 34 km/h 3.7 mm Very low 0
14 Apr 26.3 °C 40 % 34 km/h 0.0 mm Very low 1
15 Apr 27.3 °C 37 % 40 km/h 4.9 mm Low 6
16 Apr 27.1 °C 42 % 28 km/h 0.0 mm Very low 1
17 Apr 28.0 °C 40 % 30 km/h 2.0 mm Very low 4
18 Apr 28.6 °C 39 % 33 km/h 0.0 mm Very low 2
19 Apr 28.0 °C 40 % 36 km/h 0.3 mm Low 8
20 Apr 27.9 °C 38 % 29 km/h 1.3 mm Very low 3
21 Apr 26.7 °C 47 % 30 km/h 0.8 mm Low 7
22 Apr 27.9 °C 50 % 33 km/h 6.3 mm Low 8
23 Apr 27.1 °C 62 % 30 km/h 24.1 mm Very low 0
24 Apr 27.3 °C 58 % 27 km/h 10.9 mm Very low 0
25 Apr 28.3 °C 46 % 29 km/h 5.9 mm Very low 0
26 Apr 26.9 °C 49 % 31 km/h 0.8 mm Very low 0
27 Apr 26.8 °C 40 % 37 km/h 0.3 mm Very low 3
28 Apr 25.6 °C 50 % 42 km/h 6.9 mm Low 7
29 Apr 26.9 °C 46 % 38 km/h 4.1 mm Very low 1
30 Apr 27.4 °C 46 % 40 km/h 12.2 mm Very low 1
1 May 25.9 °C 64 % 34 km/h 17.3 mm Very low 0
2 May after 25.1 °C 63 % 31 km/h 16.7 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 0.1, a minimum humidity of 48% and rain the day before. Fires in the area that started in weather like this since 2016: 16.

FWI at the start 0.1
Minimum humidity 48 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Técpan de Galeana fire, May 2018
4,020 ha 17 days FWI 0.2 Min. humidity 51 % 79 km away, in 2018

First rain (1 mm or more) after it ended: 4.0 mm on 1 Jun.

What happened to them

14 days
median duration
2,613 ha
median area
100 %
went past 1,000 ha
4.8 mm
rain at the end (median; 16 of 16 had it)

It was 4.3 times larger than the median of its twins and lasted 20 days, against 14 days.

Only 1 of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 4.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

16.7 mmfirst rain
2 Maythe day after it ended
42km/h · max. gust

It was considered over on 1 May, and on 2 May 16.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 16 of 16, with a median of 4.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Apr 2018
After · 8 May 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 715Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mexico

Frequently asked questions

How long did the Chilpancingo de los Bravo fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 12 April 2018 to 1 May 2018 (20 days). The perimeter dates it from 12 April 2018 to 26 April 2018.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 11,320 hectares (113.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Chilpancingo de los Bravo (11,233 ha, 5.1 %); Coyuca de Benítez (148 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 28.6 °C, humidity dropped to 37 % and gusts hit 42 km/h. The fire danger index (FWI) reached 8, class Low.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mexico (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 16. Their median duration was 14 days and their median area 2,613 ha; 100 % went past 1,000 ha. Only 1 of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 4.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 12 April 2018 to 26 April 2018. 715 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.