Skip to content
worldfires
PT · Portugal ·

Cabeceiras de Basto fire, 12 September 2016 Gondiães e Vilar de Cunhas, Salto

Out · last detection 12 Sept 2016, 14:00 UTC

The fire started on 12 September 2016 in Gondiães e Vilar de Cunhas, Portugal, and satellites saw it burning for 1 day. Copernicus mapped a burnt perimeter of 677 hectares from satellite imagery, spread across 2 freguesias. According to ICNF, it was detected on 12 September 2016 at 14:00 and declared extinguished on 13 September 2016.

It is the 4th largest in Cabeceiras de Basto since 2016 (of 22 with a page). Number 48 in Portugal in 2016, of 180.

Burnt area
677ha
Copernicus perimeter
Duration
1day
12 Sept 2016 – 12 Sept 2016
Freguesias hit
2
freguesias
Started on
12 Sept
2016
Heat detections
13
in a single hotspot: 309 MW
Danger at start
31
High · FWI index
Average daily power
2.1GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Sept12 Sept

How it evolved, day by day

12 Sept 2016 · 2,083 MW · 13

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

27°high
49km/h · peak gust
40%lowest humidity

It had gone 16 days without rain (1 mm or more) when it started. Rain came after the fire: 23.2 mm on 13 Sept.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.4% of the area of London (6.8 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each freguesia

  1. Gondiães e Vilar de Cunhas 347 inhabitants · 0.7 km from the centre where it started
    574 ha reached on 12 Sept
    14 %
  2. Salto 1,263 inhabitants · 8.4 km from the centre
    103 ha reached on 12 Sept
    1.3 %

Burnt area inside each freguesia, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land85 %
  • Scrub and transitional woodland10 %
  • Agricultural areas5.2 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

Official record

According to ICNF, this fire started on 12 September 2016 and burned 630 ha (the satellite measured 677 ha).

ICNF (Instituto da Conservação da Natureza e das Florestas). This is the agency’s operational record: its figures may be revised when the year’s statistics are closed.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Sept 27.0 °C 40 % 49 km/h 0.1 mm High 31
13 Sept after 18.1 °C 56 % 53 km/h 23.2 mm Very low 3

Its twins: fires that started in the same weather

It started with an FWI of 30.7, a minimum humidity of 40% and 16 days without rain. Fires in the area that started in weather like this since 2016: 17.

FWI at the start 30.7
Minimum humidity 40 %
Days without rain 16
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Lama de Arcos fire, July 2022
395 ha 3 days FWI 32.9 Min. humidity 40 % 49 km away, in 2022

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

2 days
median duration
211 ha
median area
18 %
went past 1,000 ha
6.1 mm
rain at the end (median; 5 of 17 had it)

It was 3.2 times larger than the median of its twins and lasted 1 day, against 2 days.

Only 3 of its 17 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 12 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

23.2 mmfirst rain
13 Septthe day after it ended
49km/h · max. gust

It was considered over on 12 Sept, and on 13 Sept 23.2 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 5 of 17, with a median of 6.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Sept 2016
After · 19 Sept 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 12 September 2016 the air beside the fire reached 24 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak24 µg/m³
Days over the guideline0 days
PM1028 µg/m³
10 Sept12 Sept14 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 13Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Portugal

Frequently asked questions

How long did the Cabeceiras de Basto fire last?
Copernicus dates it between 12 September 2016 and 12 September 2016: 1 day between the first and last image with fire. According to ICNF, it was detected on 12 September 2016 at 14:00 and declared extinguished on 13 September 2016.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 677 hectares (6.8 km²). Official national figures may differ.
Which freguesias burned?
The fire entered 2 freguesias: Gondiães e Vilar de Cunhas (574 ha, 14 %); Salto (103 ha, 1.3 %).
Did the fire reach a town?
The fire started in Gondiães e Vilar de Cunhas and came within 0.7 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 27.0 °C, humidity dropped to 40 % and gusts hit 49 km/h. The fire danger index (FWI) reached 31, class High.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Portugal (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 17. Their median duration was 2 days and their median area 211 ha; 18 % went past 1,000 ha. Only 3 of its 17 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 12 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 13 Suomi-NPP VIIRS detections on those dates.
  • Compared with ICNF: 630 official ha against 677 ha of perimeter; they agree within 25%.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Freguesia boundaries come from geoBoundaries ADM3 (CC0 1.0 Universal (CC0 1.0) Public Domain Dedication). The area per freguesia is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.