How long did the Bulkley-Nechako E fire last?

According to the heat detections seen by satellite inside the perimeter, it burned from 7 July 2023 to 3 September 2023 (59 days). The perimeter dates it from 7 July 2023 to 2 September 2023.

How much area did it burn?

The official perimeter mapped by Canada’s CWFIS (Natural Resources Canada) is 4,792 hectares (47.9 km²). Other tallies, such as those of provincial agencies, may give slightly different figures.

Which census subdivisions burned?

The fire only entered Bulkley-Nechako E (4,781 ha, 0.3 %).

What was the weather like?

During the fire the temperature reached 26.3 °C, humidity dropped to 15 % and gusts hit 51 km/h. The fire danger index (FWI) reached 24, class High.

Where does this data come from?

From the official burnt perimeter of Canada’s CWFIS (NBAC, Natural Resources Canada) or, for the current season and until NBAC publishes it, the one rebuilt by GWIS (Copernicus); from NASA FIRMS VIIRS hotspots; and from the administrative boundaries of Canada. It is not an official report.

CA · Canada · 2023-07-07 → 2023-09-03

Bulkley-Nechako E fire, 7 July 2023 Bulkley-Nechako E

Out · last detection 3 Sept 2023, 10:05 UTC

The fire started on 7 July 2023 in Bulkley-Nechako E, Canada, and satellites saw it burning for 59 days. Canada’s CWFIS (Natural Resources Canada) mapped an official burnt perimeter of 4,792 hectares from satellite imagery, spread across a single census subdivision.

It is the 184th largest in British Columbia since 2016 (of 448 with a page). Number 277 in Canada in 2023, of 489.

Compare with…

Suggestions: Bulkley-Nechako E · 2021 Bulkley-Nechako E · 2024 Bulkley-Nechako E · 2018 Bulkley-Nechako E · 2024

Burnt area: 4,792ha; official perimeter (CWFIS)
Duration: 59days; 7 Jul 2023 – 3 Sept 2023
Census subdivisions hit: 1; municipalities
Started on: 7 Jul; 2023
Heat detections: 610; in a single hotspot: 603 MW
Danger at start: 4; Very low · FWI index
Average daily power: 1.1GW; detected power per day, on average

HOTSPOTS BY DAY 7 Jul3 Sept

Play back 3 Sept 2023

How it evolved, day by day

8 Jul 11 Jul 14 Jul 19 Jul 20 Jul 18 Aug 28 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

26°high

51km/h · peak gust

15%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 4.3 mm on 5 Sept.

This area had burned before

0% of the perimeter overlaps earlier fires recorded since 2016: 20 ha in 2021.

20 ha Bulkley-Nechako E fire, July 2021 19,852 ha in total; the hectares shown are those it shares with this fire

How big is it?

It burned the equivalent of 3% of the area of London (48 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each census subdivision

Bulkley-Nechako E where it started

4,781 ha reached on 8 Jul

0.3 %

Burnt area inside each census subdivision, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025

Built-up area< 0.1 ha

Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day	High	Min. humidity	Peak gust	Rain	Danger (FWI)
7 Jul	23.9 °C	33 %	35 km/h	2.8 mm	Very low 4
8 Jul	23.8 °C	35 %	20 km/h	1.4 mm	Low 6
9 Jul	21.5 °C	45 %	28 km/h	4.7 mm	Very low 2
10 Jul	21.6 °C	43 %	37 km/h	2.7 mm	Very low 2
11 Jul	20.3 °C	30 %	37 km/h	0.0 mm	Low 8
12 Jul	20.7 °C	28 %	23 km/h	0.0 mm	Moderate 12
13 Jul	20.4 °C	40 %	24 km/h	1.3 mm	Low 6
14 Jul	18.5 °C	53 %	22 km/h	0.1 mm	Low 7
15 Jul	20.2 °C	41 %	35 km/h	1.6 mm	Low 5
16 Jul	17.0 °C	51 %	32 km/h	6.7 mm	Very low 0
17 Jul	14.8 °C	50 %	48 km/h	1.9 mm	Very low 2
18 Jul	16.0 °C	55 %	35 km/h	0.0 mm	Very low 3
19 Jul	21.9 °C	42 %	20 km/h	2.2 mm	Very low 1
20 Jul	24.9 °C	34 %	30 km/h	1.0 mm	Very low 4
21 Jul	18.4 °C	52 %	29 km/h	3.8 mm	Very low 1
22 Jul	16.9 °C	51 %	38 km/h	5.0 mm	Very low 0
23 Jul	14.5 °C	51 %	24 km/h	5.8 mm	Very low 0
24 Jul	14.1 °C	65 %	23 km/h	6.9 mm	Very low 0
25 Jul	8.0 °C	90 %	41 km/h	14.7 mm	Very low 0
26 Jul	17.0 °C	45 %	41 km/h	0.0 mm	Very low 0
27 Jul	14.2 °C	56 %	28 km/h	0.7 mm	Very low 0
28 Jul	17.8 °C	43 %	31 km/h	0.8 mm	Very low 1
29 Jul	20.0 °C	44 %	30 km/h	4.2 mm	Very low 0
30 Jul	17.2 °C	44 %	34 km/h	1.2 mm	Very low 1
31 Jul	17.5 °C	44 %	35 km/h	3.0 mm	Very low 1
1 Aug	16.5 °C	47 %	28 km/h	4.0 mm	Very low 0
2 Aug	16.7 °C	38 %	28 km/h	2.0 mm	Very low 0
3 Aug	20.7 °C	22 %	14 km/h	0.0 mm	Very low 2
4 Aug	23.0 °C	30 %	15 km/h	0.1 mm	Low 6
5 Aug	24.9 °C	27 %	24 km/h	0.0 mm	Low 10
6 Aug	21.7 °C	45 %	27 km/h	2.3 mm	Very low 2
7 Aug	20.0 °C	43 %	36 km/h	1.8 mm	Very low 2
8 Aug	15.0 °C	71 %	32 km/h	5.9 mm	Very low 0
9 Aug	15.0 °C	55 %	47 km/h	2.4 mm	Very low 0
10 Aug	15.4 °C	50 %	40 km/h	0.8 mm	Very low 1
11 Aug	13.1 °C	70 %	40 km/h	3.1 mm	Very low 0
12 Aug	19.4 °C	55 %	38 km/h	0.1 mm	Very low 1
13 Aug	24.4 °C	38 %	45 km/h	0.0 mm	Low 6
14 Aug	23.7 °C	40 %	40 km/h	0.0 mm	Low 8
15 Aug	22.9 °C	36 %	51 km/h	0.0 mm	Moderate 11
16 Aug	25.7 °C	31 %	40 km/h	0.0 mm	Moderate 12
17 Aug	19.9 °C	27 %	47 km/h	0.0 mm	Moderate 14
18 Aug	14.3 °C	37 %	37 km/h	0.8 mm	Low 8
19 Aug	19.1 °C	25 %	20 km/h	0.0 mm	Low 10
20 Aug	17.3 °C	33 %	23 km/h	0.2 mm	Moderate 11
21 Aug	20.7 °C	25 %	44 km/h	0.1 mm	Moderate 16
22 Aug	17.8 °C	41 %	31 km/h	0.0 mm	Moderate 13
23 Aug	17.0 °C	47 %	31 km/h	3.1 mm	Very low 2
24 Aug	18.9 °C	43 %	28 km/h	0.5 mm	Very low 4
25 Aug	20.8 °C	36 %	27 km/h	0.0 mm	Low 8
26 Aug	23.4 °C	30 %	23 km/h	0.0 mm	Moderate 12
27 Aug	25.9 °C	15 %	20 km/h	0.0 mm	Moderate 19
28 Aug	26.3 °C	25 %	20 km/h	0.0 mm	High 24
29 Aug	18.2 °C	59 %	28 km/h	3.2 mm	Very low 2
30 Aug	15.7 °C	45 %	39 km/h	0.0 mm	Very low 5
31 Aug	17.2 °C	41 %	36 km/h	0.6 mm	Low 9
1 Sept	22.2 °C	32 %	40 km/h	0.0 mm	Moderate 15
2 Sept	21.7 °C	18 %	41 km/h	0.0 mm	High 22
3 Sept	15.8 °C	34 %	38 km/h	0.0 mm	Moderate 18
4 Sept after	13.1 °C	46 %	32 km/h	0.0 mm	Moderate 14
5 Sept after	8.5 °C	65 %	26 km/h	4.3 mm	Very low 0

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

↔

Before · 30 Jun 2023

After · 10 Sept 2023

Before After

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 20 August 2023 the air beside the fire reached 568 µg/m³ of PM2.5. That day averaged 289: 19 times the WHO daily guideline (15).

PM2.5 peak568 µg/m³

Days over the guideline40 days

PM10812 µg/m³

Optical depth8.78

WHO 15

56789101112131415161718192021222324252627282930311234567891011121314151617181920212223242526272829303112345

Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 610Every satellite heat detection, one by one, with time, satellite, power and coordinates.

⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.

Date and time	Satellite	FRP (MW)	Lat	Lon

Other fires nearby

All fires in Canada ›

Frequently asked questions

How long did the Bulkley-Nechako E fire last?: According to the heat detections seen by satellite inside the perimeter, it burned from 7 July 2023 to 3 September 2023 (59 days). The perimeter dates it from 7 July 2023 to 2 September 2023.
How much area did it burn?: The official perimeter mapped by Canada’s CWFIS (Natural Resources Canada) is 4,792 hectares (47.9 km²). Other tallies, such as those of provincial agencies, may give slightly different figures.
Which census subdivisions burned?: The fire only entered Bulkley-Nechako E (4,781 ha, 0.3 %).
What was the weather like?: During the fire the temperature reached 26.3 °C, humidity dropped to 15 % and gusts hit 51 km/h. The fire danger index (FWI) reached 24, class High.
Where does this data come from?: From the official burnt perimeter of Canada’s CWFIS (NBAC, Natural Resources Canada) or, for the current season and until NBAC publishes it, the one rebuilt by GWIS (Copernicus); from NASA FIRMS VIIRS hotspots; and from the administrative boundaries of Canada. It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings ›

Satellite cross-check

NASA FIRMS ↗
CWFIS · Interactive map ↗

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

25 October 2026 Last day with fire: 2 September 2023 → 3 September 2023.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error

What do you think is wrong?

Dates or duration Place or towns Burned area Name It was not a wildfire Same fire as another page Something else

What really happened?

Your connection to the fire (optional) Email (optional)

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this

Perimeter: NBAC (Natural Resources Canada), official.
Dates adjusted with the VIIRS detections inside the perimeter, which said 7 July 2023 to 2 September 2023. 610 Suomi-NPP VIIRS detections on those dates.
We have not matched this page with any official record.
Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter is official: it comes from the National Burned Area Composite (NBAC) of the Canadian Wildland Fire Information System (CWFIS), Natural Resources Canada, which maps it on satellite imagery and publishes it under the Open Government Licence – Canada. Until NBAC publishes the current season, this year’s fires carry the perimeter rebuilt from heat detections by GWIS (Copernicus, CC BY 4.0), which is approximate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Census subdivision boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per census subdivision is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.

Where it burned