Skip to content
worldfires
BR · Brazil · –

Barreiras fire, September 2023 Barreiras

Out · last detection 23 Sept 2023, 16:37 UTC

The fire started on 19 September 2023 in Barreiras, Brazil, and satellites saw it burning for 5 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,753 hectares from heat detections, spread across a single municipality.

It is the 169th largest in Bahia since 2016 (of 386 with a page). Number 133 in Brazil in 2023, of 430.

Burnt area
5,753ha
GWIS perimeter (Copernicus)
Duration
5days
19 Sept 2023 – 23 Sept 2023
Municipalities hit
1
municipalities
Started on
19 Sept
2023
Heat detections
182
in a single hotspot: 651 MW
Danger at start
39
Very high · FWI index
Average daily power
811MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 19 Sept23 Sept
23 Sept 2023

How it evolved, day by day

19 Sept 2023 · 15 MW · 2 20 Sept 2023 · 1,831 MW · 80 21 Sept 2023 · 544 MW · 53 22 Sept 2023 · 1,495 MW · 34 23 Sept 2023 · 168 MW · 13
19 Sept 20 Sept 21 Sept 22 Sept 23 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
32km/h · peak gust
15%lowest humidity

It had gone 21 days without rain (1 mm or more) when it started.

This area had burned before

89% of the perimeter overlaps earlier fires recorded since 2016: 1,040 ha in 2017, 1,729 ha in 2018, 4,164 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 5,103 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.6% of the area of London (58 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Barreiras 159,734 inhabitants where it started
    5,790 ha reached on 19 Sept
    0.7 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area5.0 ha
Residents≈ 800

Inside the perimeter there were about 5.0 hectares of built-up land and about 800 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
19 Sept 35.1 °C 23 % 31 km/h 0.0 mm Very high 39
20 Sept 34.4 °C 26 % 32 km/h 0.0 mm Very high 40
21 Sept 34.5 °C 25 % 29 km/h 0.0 mm Very high 39
22 Sept 34.3 °C 17 % 30 km/h 0.0 mm Very high 41
23 Sept 35.6 °C 15 % 32 km/h 0.0 mm Very high 44
24 Sept after 37.0 °C 16 % 32 km/h 0.0 mm Very high 45
25 Sept after 36.5 °C 25 % 34 km/h 0.0 mm Very high 44
26 Sept after 36.2 °C 29 % 19 km/h 0.0 mm High 35
27 Sept after 33.7 °C 40 % 22 km/h 0.0 mm High 32
28 Sept after 35.7 °C 34 % 28 km/h 0.0 mm High 30
29 Sept after 35.9 °C 32 % 29 km/h 0.0 mm High 32
30 Sept after 36.5 °C 23 % 30 km/h 0.0 mm Very high 40
1 Oct after 36.9 °C 22 % 29 km/h 0.0 mm Very high 41
2 Oct after 36.7 °C 17 % 35 km/h 0.0 mm Very high 46
3 Oct after 36.0 °C 24 % 36 km/h 0.0 mm Very high 46

Its twins: fires that started in the same weather

It started with an FWI of 38.7, a minimum humidity of 23% and 21 days without rain. Fires in the area that started in weather like this since 2016: 20.

FWI at the start 38.7
Minimum humidity 23 %
Days without rain 21
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Barreiras fire, October 2022
5,537 ha 13 days FWI 38.2 Min. humidity 21 % 43 km away, in 2022

First rain (1 mm or more) after it ended: 2.5 mm on 23 Oct.

What happened to them

14 days
median duration
5,789 ha
median area
25 %
went past 10,000 ha
3.0 mm
rain at the end (median; 16 of 20 had it)

It burned an area similar to its twins (5,753 ha against a median of 5,789 ha) and lasted 5 days, against 14 days.

In 4 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
32km/h · max. gust

It was considered over on 23 Sept, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 16 of 20, with a median of 3.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 12 Sept 2023
After · 30 Sept 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 26 September 2023 the air beside the fire reached 27 µg/m³ of PM2.5. That day averaged 16: 1.0 times the WHO daily guideline (15).

PM2.5 peak27 µg/m³
Days over the guideline1 day
PM1038 µg/m³
Optical depth0.61
17 Sept19 Sept21 Sept23 Sept25 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 182Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Barreiras fire last?
GWIS (Copernicus) dates it between 19 September 2023 and 23 September 2023: 5 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,753 hectares (57.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Barreiras (5,790 ha, 0.7 %).
What was the weather like?
During the fire the temperature reached 35.6 °C, humidity dropped to 15 % and gusts hit 32 km/h. The fire danger index (FWI) reached 44, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 20. Their median duration was 14 days and their median area 5,789 ha; 25 % went past 10,000 ha. In 4 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 182 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.