Skip to content
worldfires
BR · Brazil · –

Altamira fire, 15 August 2022 Altamira

Out · last detection 13 Sept 2022, 04:34 UTC

The fire started on 15 August 2022 in Altamira, Brazil, and satellites saw it burning for 30 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 13,513 hectares from heat detections, spread across a single municipality.

It is the 133th largest in Pará since 2016 (of 957 with a page). Number 64 in Brazil in 2022, of 682.

Burnt area
13,513ha
GWIS perimeter (Copernicus)
Duration
30days
15 Aug 2022 – 13 Sept 2022
Municipalities hit
1
municipalities
Started on
15 Aug
2022
Heat detections
1,527
in a single hotspot: 251 MW
Danger at start
40
Very high · FWI index
Average daily power
670MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Aug13 Sept
13 Sept 2022

How it evolved, day by day

15 Aug 2022 · 2,512 MW · 39 16 Aug 2022 · 1,916 MW · 278 17 Aug 2022 · 4,367 MW · 248 18 Aug 2022 · 2,560 MW · 155 19 Aug 2022 · 1,029 MW · 72 20 Aug 2022 · 255 MW · 42 21 Aug 2022 · 614 MW · 43 22 Aug 2022 · 451 MW · 24 23 Aug 2022 · 410 MW · 36 24 Aug 2022 · 663 MW · 46 25 Aug 2022 · 82 MW · 16 26 Aug 2022 · 155 MW · 33 27 Aug 2022 · 37 MW · 20 28 Aug 2022 · 153 MW · 25 29 Aug 2022 · 962 MW · 33 30 Aug 2022 · 544 MW · 92 31 Aug 2022 · 359 MW · 84 1 Sept 2022 · 579 MW · 65 2 Sept 2022 · 558 MW · 55 3 Sept 2022 · 803 MW · 54 4 Sept 2022 · 184 MW · 19 5 Sept 2022 · 49 MW · 22 6 Sept 2022 · 11 MW · 10 8 Sept 2022 · 4 MW · 1 9 Sept 2022 · 147 MW · 3 10 Sept 2022 · 3 MW · 1 11 Sept 2022 · 5 MW · 4 12 Sept 2022 · 7 MW · 3 13 Sept 2022 · 6 MW · 4
17 Aug 27 Aug 2 Sept 9 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
40km/h · peak gust
17%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 3.1 mm on 16 Sept.

This area had burned before

62% of the perimeter overlaps earlier fires recorded since 2016: 556 ha in 2016, 375 ha in 2017, 283 ha in 2018, 302 ha in 2019, 6,337 ha in 2020, 4,251 ha in 2021. Part of it burned more than once, so the yearly figures add up to more than the 8,386 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 8.5% of the area of London (135 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Altamira 126,279 inhabitants where it started
    13,667 ha reached on 15 Aug
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Aug 34.5 °C 32 % 32 km/h 0.0 mm Very high 40
16 Aug 34.3 °C 27 % 27 km/h 0.0 mm High 38
17 Aug 35.0 °C 27 % 25 km/h 0.0 mm Very high 39
18 Aug 35.7 °C 26 % 26 km/h 0.0 mm Very high 38
19 Aug 34.0 °C 32 % 29 km/h 0.0 mm Very high 38
20 Aug 34.3 °C 26 % 33 km/h 0.0 mm Very high 38
21 Aug 35.2 °C 21 % 38 km/h 0.0 mm Extreme 54
22 Aug 35.0 °C 19 % 40 km/h 0.0 mm Extreme 58
23 Aug 34.3 °C 25 % 33 km/h 0.0 mm Extreme 53
24 Aug 36.4 °C 23 % 27 km/h 0.0 mm Very high 47
25 Aug 33.5 °C 36 % 29 km/h 0.0 mm Very high 42
26 Aug 34.0 °C 37 % 30 km/h 0.0 mm High 34
27 Aug 35.2 °C 28 % 30 km/h 0.0 mm High 38
28 Aug 35.1 °C 24 % 23 km/h 0.0 mm High 32
29 Aug 37.1 °C 17 % 32 km/h 0.0 mm Extreme 52
30 Aug 36.1 °C 23 % 26 km/h 0.0 mm Very high 44
31 Aug 36.0 °C 24 % 25 km/h 0.0 mm Very high 46
1 Sept 36.5 °C 21 % 30 km/h 0.0 mm Very high 49
2 Sept 36.5 °C 18 % 36 km/h 0.0 mm Extreme 54
3 Sept 36.0 °C 18 % 36 km/h 0.0 mm Extreme 58
4 Sept 37.2 °C 19 % 33 km/h 0.0 mm Extreme 58
5 Sept 36.7 °C 24 % 28 km/h 0.0 mm Very high 47
6 Sept 35.5 °C 36 % 32 km/h 0.1 mm Very high 40
7 Sept 35.4 °C 30 % 34 km/h 0.0 mm Very high 41
8 Sept 35.8 °C 27 % 26 km/h 0.0 mm High 36
9 Sept 35.8 °C 25 % 29 km/h 0.0 mm Very high 38
10 Sept 36.3 °C 24 % 30 km/h 0.0 mm Very high 38
11 Sept 35.0 °C 31 % 24 km/h 0.0 mm High 36
12 Sept 35.2 °C 36 % 24 km/h 0.0 mm High 32
13 Sept 31.5 °C 50 % 26 km/h 0.0 mm High 31
14 Sept after 34.5 °C 39 % 24 km/h 0.0 mm High 30
15 Sept after 34.5 °C 38 % 23 km/h 0.2 mm High 27
16 Sept after 33.1 °C 48 % 25 km/h 3.1 mm Low 6

Its twins: fires that started in the same weather

It started with an FWI of 39.5, a minimum humidity of 32% and more than two months without rain. Fires in the area that started in weather like this since 2016: 29.

FWI at the start 39.5
Minimum humidity 32 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Altamira fire, August 2021
5,086 ha 6 days FWI 39.1 Min. humidity 33 % 2 km away, in 2021

First rain (1 mm or more) after it ended: 18.8 mm on 2 Sept.

What happened to them

25 days
median duration
9,755 ha
median area
45 %
went past 10,000 ha
2.6 mm
rain at the end (median; 17 of 29 had it)

It burned an area similar to its twins (13,513 ha against a median of 9,755 ha) and lasted 30 days, against 25 days.

In 12 of 29, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

3.1 mmfirst rain
16 Sept3 days after it ended
40km/h · max. gust

It was considered over on 13 Sept, and on 16 Sept 3.1 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 17 of 29, with a median of 2.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Aug 2022
After · 20 Sept 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 4 September 2022 the air beside the fire reached 950 µg/m³ of PM2.5. That day averaged 486: 32 times the WHO daily guideline (15).

PM2.5 peak950 µg/m³
Days over the guideline30 days
PM101,356 µg/m³
Optical depth2.23
13 Aug19 Aug25 Aug31 Aug6 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,527Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Altamira fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 15 August 2022 to 13 September 2022 (30 days). The perimeter dates it from 15 August 2022 to 8 September 2022.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 13,513 hectares (135.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Altamira (13,667 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 37.2 °C, humidity dropped to 17 % and gusts hit 40 km/h. The fire danger index (FWI) reached 58, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 29. Their median duration was 25 days and their median area 9,755 ha; 45 % went past 10,000 ha. In 12 of 29, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 8 September 2022 → 13 September 2022.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 15 August 2022 to 8 September 2022. 1,527 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.