Skip to content
worldfires
PT · Portugal ·

Alfândega da Fé fire, 24 August 2018 Parada e Sendim da Ribeira, Alfândega da Fé, Vilar Chão

Out · last detection 24 Aug 2018, 02:05 UTC

The fire started on 24 August 2018 in Vilar Chão, Portugal, and satellites saw it burning for 1 day. Copernicus mapped a burnt perimeter of 537 hectares from satellite imagery, spread across 3 freguesias. According to ICNF, the largest of the 2 recorded fires was detected on 23 August 2018 at 15:13 and declared extinguished on 24 August 2018.

Number 6 in Portugal in 2018, of 23.

The power measured by the satellite is low (1.0 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
537ha
Copernicus perimeter
Duration
1day
24 Aug 2018 – 24 Aug 2018
Freguesias hit
3
freguesias
Started on
24 Aug
2018
Heat detections
1
in a single hotspot: 1 MW
Danger at start
33
High · FWI index
Average daily power
1MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 24 Aug24 Aug

How it evolved, day by day

24 Aug 2018 · 1 MW · 1

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
31km/h · peak gust
23%lowest humidity

It had gone 43 days without rain (1 mm or more) when it started. Rain came after the fire: 1.0 mm on 28 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.3% of the area of London (5.4 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each freguesia

  1. Parada e Sendim da Ribeira 208 inhabitants · 1.5 km from the centre
    354 ha
    14 %
  2. Alfândega da Fé 1,937 inhabitants · 4.2 km from the centre
    102 ha
    2.5 %
  3. Vilar Chão 204 inhabitants · 2.3 km from the centre where it started
    83 ha reached on 24 Aug
    3.4 %

Burnt area inside each freguesia, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Scrub and transitional woodland47 %
  • Agricultural areas38 %
  • Coniferous forest13 %
  • Other natural land3.0 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

Official record

Complex of 2 fires according to ICNF

According to ICNF, 2 fires started inside this perimeter on these dates, totalling 618 ha (the satellite measured 537 ha).

ICNF records each fire that started at a different time or place separately; the satellite sees a single burned area, so this page groups them together. The numbers on the map show where each one started.

When each one burned

1 7 ha 2 611 ha
21 Aug24 Aug
negligence cause unknown or not published
  1. 1 Alfândega da Fé Alfândega da Fé 21 August 2018 · 00:52 7 ha · extinguished on 21 August 2018 · cause: negligence
  2. 2 Alfândega da Fé Alfândega da Fé 23 August 2018 · 15:13 611 ha · extinguished on 24 August 2018 · cause: unknown

Total according to ICNF: 618 ha, 115 % of the 537 ha in the satellite perimeter.

ICNF (Instituto da Conservação da Natureza e das Florestas). This is the agency’s operational record: its figures may be revised when the year’s statistics are closed.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
24 Aug 32.4 °C 23 % 31 km/h 0.0 mm High 33
25 Aug after 30.3 °C 29 % 25 km/h 0.0 mm High 34
26 Aug after 31.6 °C 30 % 22 km/h 0.0 mm High 27
27 Aug after 33.5 °C 28 % 22 km/h 0.1 mm High 31
28 Aug after 30.0 °C 40 % 41 km/h 1.0 mm High 27

Its twins: fires that started in the same weather

It started with an FWI of 33.4, a minimum humidity of 23% and 43 days without rain. Fires in the area that started in weather like this since 2016: 19.

FWI at the start 33.4
Minimum humidity 23 %
Days without rain 43
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Pinhel fire, August 2016
391 ha 1 day FWI 35.4 Min. humidity 23 % 57 km away, in 2016

First rain (1 mm or more) after it ended: 2.6 mm on 24 Aug.

What happened to them

2 days
median duration
356 ha
median area
26 %
went past 1,000 ha
2.1 mm
rain at the end (median; 14 of 19 had it)

It was 1.5 times larger than the median of its twins and lasted 1 day, against 2 days.

Only 7 of its 19 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 5 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.0 mmfirst rain
28 Aug4 days after it ended
31km/h · max. gust

It was considered over on 24 Aug, and on 28 Aug 1.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 14 of 19, with a median of 2.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 17 Aug 2018
After · 31 Aug 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 23 August 2018 the air beside the fire reached 16 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak16 µg/m³
Days over the guideline0 days
PM1023 µg/m³
22 Aug24 Aug26 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Portugal

Frequently asked questions

How long did the Alfândega da Fé fire last?
Copernicus dates it between 24 August 2018 and 24 August 2018: 1 day between the first and last image with fire. According to ICNF, the largest of the 2 recorded fires was detected on 23 August 2018 at 15:13 and declared extinguished on 24 August 2018.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 537 hectares (5.4 km²). Official national figures may differ.
Which freguesias burned?
The fire entered 3 freguesias: Parada e Sendim da Ribeira (354 ha, 14 %); Alfândega da Fé (102 ha, 2.5 %); Vilar Chão (83 ha, 3.4 %).
Did the fire reach a town?
The fire came within 1.5 km of the centre of Parada e Sendim da Ribeira, the closest of the areas it touched. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 32.4 °C, humidity dropped to 23 % and gusts hit 31 km/h. The fire danger index (FWI) reached 33, class High.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Portugal (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 19. Their median duration was 2 days and their median area 356 ha; 26 % went past 1,000 ha. Only 7 of its 19 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 5 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. One Suomi-NPP VIIRS detection on those dates.
  • Compared with ICNF: 618 official ha against 537 ha of perimeter; they agree within 25%.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Freguesia boundaries come from geoBoundaries ADM3 (CC0 1.0 Universal (CC0 1.0) Public Domain Dedication). The area per freguesia is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.