Skip to content
worldfires
CN · China · –

Zhenlai County fire, 8 March 2016 镇赉县 · Zhenlai County, Taobei District

Out · last detection 20 Mar 2016, 03:54 UTC

The fire started on 8 March 2016 in Zhenlai County, China, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,511 hectares from heat detections, spread across 2 municipalities.

It is the 182th largest in Jilin Province since 2016 (of 395 with a page). Number 52 in China in 2016, of 140.

The power measured by the satellite is low (17.8 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
1,511ha
GWIS perimeter (Copernicus)
Duration
13days
8 Mar 2016 – 20 Mar 2016
Municipalities hit
2
counties
Started on
8 Mar
2016
Heat detections
54
in a single hotspot: 18 MW
Danger at start
4
Very low · FWI index
Average daily power
23MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 8 Mar20 Mar
20 Mar 2016

How it evolved, day by day

8 Mar 2016 · 14 MW · 2 10 Mar 2016 · 7 MW · 2 12 Mar 2016 · 19 MW · 6 13 Mar 2016 · 39 MW · 4 14 Mar 2016 · 10 MW · 2 15 Mar 2016 · 30 MW · 10 16 Mar 2016 · 34 MW · 6 17 Mar 2016 · 50 MW · 12 18 Mar 2016 · 34 MW · 7 19 Mar 2016 · 14 MW · 2 20 Mar 2016 · 3 MW · 1
8 Mar 13 Mar 17 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

17°high
65km/h · peak gust
12%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1% of the area of London (15 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Zhenlai County 镇赉县 where it started
    772 ha
    0.1 %
  2. Taobei District 洮北区
    735 ha
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
8 Mar -1.9 °C 28 % 49 km/h 0.0 mm Very low 4
9 Mar -2.4 °C 24 % 40 km/h 0.0 mm Very low 4
10 Mar -1.8 °C 24 % 35 km/h 0.0 mm Very low 4
11 Mar 0.4 °C 26 % 32 km/h 0.0 mm Very low 3
12 Mar 7.5 °C 16 % 49 km/h 0.0 mm Low 8
13 Mar 2.5 °C 16 % 41 km/h 0.0 mm Low 6
14 Mar 8.5 °C 20 % 39 km/h 0.0 mm Low 6
15 Mar 14.9 °C 12 % 50 km/h 0.0 mm Moderate 12
16 Mar 16.0 °C 14 % 38 km/h 0.0 mm Low 11
17 Mar 16.9 °C 17 % 65 km/h 0.0 mm Moderate 19
18 Mar 7.2 °C 26 % 52 km/h 0.0 mm Moderate 12
19 Mar 8.9 °C 22 % 23 km/h 0.0 mm Low 6
20 Mar 13.6 °C 21 % 22 km/h 0.0 mm Low 8
21 Mar after 9.7 °C 34 % 46 km/h 0.0 mm Low 10
22 Mar after 6.5 °C 25 % 49 km/h 0.0 mm Moderate 16
23 Mar after 7.1 °C 20 % 54 km/h 0.0 mm Moderate 18
24 Mar after 7.8 °C 23 % 40 km/h 0.0 mm Moderate 13
25 Mar after 14.5 °C 19 % 25 km/h 0.0 mm Low 11
26 Mar after 15.5 °C 14 % 36 km/h 0.0 mm Moderate 18
27 Mar after 13.6 °C 12 % 35 km/h 0.0 mm Moderate 16
28 Mar after 16.4 °C 14 % 48 km/h 0.0 mm Moderate 14
29 Mar after 10.6 °C 18 % 54 km/h 0.0 mm High 27
30 Mar after 11.3 °C 18 % 42 km/h 0.0 mm Moderate 14

Its twins: fires that started in the same weather

It started with an FWI of 4.1, a minimum humidity of 28% and 2 days without rain. Fires in the area that started in weather like this since 2016: 39.

FWI at the start 4.1
Minimum humidity 28 %
Days without rain 2
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Taonan City fire, March 2020
1,037 ha 2 days FWI 4.5 Min. humidity 29 % 31 km away, in 2020

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

5 days
median duration
1,902 ha
median area
100 %
went past 1,000 ha
1.7 mm
rain at the end (median; 27 of 39 had it)

It burned an area similar to its twins (1,511 ha against a median of 1,902 ha) and lasted 13 days, against 5 days.

In 12 of 39, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.7 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
65km/h · max. gust

It was considered over on 20 Mar, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 27 of 39, with a median of 1.7 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 1 Mar 2016
After · 27 Mar 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 54Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in China

Frequently asked questions

How long did the Zhenlai County fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 8 March 2016 to 20 March 2016 (13 days). The perimeter dates it from 10 March 2016 to 20 March 2016.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,511 hectares (15.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Zhenlai County (772 ha, 0.1 %); Taobei District (735 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 16.9 °C, humidity dropped to 12 % and gusts hit 65 km/h. The fire danger index (FWI) reached 19, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of China (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 39. Their median duration was 5 days and their median area 1,902 ha; 100 % went past 1,000 ha. In 12 of 39, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.7 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Name: Taobei District → Zhenlai County.
  2. Start date: 10 March 2016 → 8 March 2016.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 10 March 2016 to 20 March 2016. 54 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.