Skip to content
worldfires
CN · China · –

Zhaoyuan County fire, 7 March 2016 肇源县 · Zhaoyuan County

Out · last detection 20 Mar 2016, 03:54 UTC

The fire started on 7 March 2016 in Zhaoyuan County, China, and satellites saw it burning for 14 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,540 hectares from heat detections, spread across a single municipality.

It is the 419th largest in Heilongjiang Province since 2016 (of 943 with a page). Number 47 in China in 2016, of 140.

Burnt area
1,540ha
GWIS perimeter (Copernicus)
Duration
14days
7 Mar 2016 – 20 Mar 2016
Municipalities hit
1
counties
Started on
7 Mar
2016
Heat detections
60
in a single hotspot: 81 MW
Danger at start
1
Very low · FWI index
Average daily power
58MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 7 Mar20 Mar
20 Mar 2016

How it evolved, day by day

7 Mar 2016 · 3 MW · 1 9 Mar 2016 · 3 MW · 1 10 Mar 2016 · 2 MW · 1 11 Mar 2016 · 36 MW · 7 12 Mar 2016 · 97 MW · 5 13 Mar 2016 · 54 MW · 13 14 Mar 2016 · 81 MW · 10 15 Mar 2016 · 236 MW · 15 17 Mar 2016 · 20 MW · 3 19 Mar 2016 · 8 MW · 2 20 Mar 2016 · 102 MW · 2
7 Mar 11 Mar 15 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

15°high
64km/h · peak gust
16%lowest humidity

It had gone one day without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1% of the area of London (15 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Zhaoyuan County 肇源县 where it started
    1,541 ha reached on 7 Mar
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
7 Mar -0.4 °C 21 % 31 km/h 0.0 mm Very low 1
8 Mar -2.5 °C 32 % 45 km/h 0.0 mm Very low 3
9 Mar -2.7 °C 26 % 38 km/h 0.0 mm Very low 3
10 Mar -2.4 °C 26 % 35 km/h 0.0 mm Very low 2
11 Mar -1.1 °C 27 % 34 km/h 0.0 mm Very low 3
12 Mar 6.5 °C 20 % 53 km/h 0.0 mm Low 8
13 Mar 1.3 °C 16 % 39 km/h 0.0 mm Low 6
14 Mar 6.1 °C 22 % 41 km/h 0.0 mm Low 5
15 Mar 13.3 °C 18 % 47 km/h 0.0 mm Low 9
16 Mar 14.8 °C 19 % 38 km/h 0.0 mm Low 8
17 Mar 13.9 °C 34 % 64 km/h 0.0 mm Moderate 14
18 Mar 5.4 °C 42 % 58 km/h 0.0 mm Low 10
19 Mar 8.2 °C 21 % 25 km/h 0.0 mm Low 6
20 Mar 12.6 °C 23 % 26 km/h 0.0 mm Low 7
21 Mar after 8.1 °C 35 % 38 km/h 0.0 mm Low 8
22 Mar after 5.8 °C 30 % 49 km/h 0.0 mm Moderate 14
23 Mar after 5.8 °C 27 % 54 km/h 0.0 mm Moderate 15
24 Mar after 7.5 °C 26 % 38 km/h 0.0 mm Low 11
25 Mar after 13.9 °C 21 % 29 km/h 0.0 mm Low 10
26 Mar after 13.6 °C 22 % 38 km/h 0.0 mm Moderate 13
27 Mar after 11.2 °C 16 % 34 km/h 0.0 mm Moderate 13
28 Mar after 14.9 °C 20 % 46 km/h 0.0 mm Moderate 12
29 Mar after 10.1 °C 18 % 50 km/h 0.3 mm High 21
30 Mar after 10.2 °C 26 % 35 km/h 0.0 mm Low 11

Its twins: fires that started in the same weather

It started with an FWI of 0.6, a minimum humidity of 21% and 1 day without rain. Fires in the area that started in weather like this since 2016: 27.

FWI at the start 0.6
Minimum humidity 21 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Zhenlai County fire, March 2025
16,883 ha 11 days FWI 1.0 Min. humidity 19 % 51 km away, in 2025

First rain (1 mm or more) after it ended: 2.8 mm on 26 Mar.

What happened to them

6 days
median duration
1,658 ha
median area
100 %
went past 1,000 ha
2.0 mm
rain at the end (median; 22 of 27 had it)

It burned an area similar to its twins (1,540 ha against a median of 1,658 ha) and lasted 14 days, against 6 days.

In 5 of 27, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
64km/h · max. gust

It was considered over on 20 Mar, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 22 of 27, with a median of 2.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 29 Feb 2016
After · 27 Mar 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 60Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in China

Frequently asked questions

How long did the Zhaoyuan County fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 7 March 2016 to 20 March 2016 (14 days). The perimeter dates it from 11 March 2016 to 17 March 2016.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,540 hectares (15.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Zhaoyuan County (1,541 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 14.8 °C, humidity dropped to 16 % and gusts hit 64 km/h. The fire danger index (FWI) reached 14, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of China (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 27. Their median duration was 6 days and their median area 1,658 ha; 100 % went past 1,000 ha. In 5 of 27, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 17 March 2016 → 20 March 2016.
  2. Start date: 11 March 2016 → 7 March 2016.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 11 March 2016 to 17 March 2016. 60 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.