Skip to content
worldfires
RU · Russia · –

Zeysky District fire, 11 May 2026 Zeysky District, Magdagachinsky District

Out · last detection 21 May 2026, 17:37 UTC

The fire started on 11 May 2026 in Zeysky District, Russia, and satellites saw it burning for 11 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 85,039 hectares from heat detections, spread across 2 municipalities.

Number 13 in Russia in 2026, of 420.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
85,039ha
GWIS perimeter (Copernicus)
Duration
11days
11 May 2026 – 21 May 2026
Municipalities hit
2
districts
Started on
11 May
2026
Heat detections
2,470
in a single hotspot: 172 MW
Danger at start
11
Low · FWI index
Average daily power
2.6GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 11 May21 May
21 May 2026

How it evolved, day by day

11 May 2026 · 12 MW · 3 12 May 2026 · 171 MW · 35 14 May 2026 · 941 MW · 61 15 May 2026 · 2,791 MW · 201 16 May 2026 · 3,032 MW · 246 17 May 2026 · 4,403 MW · 328 18 May 2026 · 3,433 MW · 316 19 May 2026 · 3,853 MW · 414 20 May 2026 · 4,446 MW · 449 21 May 2026 · 3,272 MW · 417
11 May 14 May 16 May 18 May 20 May

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (31 passes) and with what wind. Watch the film

The weather it burned in

26°high
59km/h · peak gust
14%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 14.3 mm on 23 May.

This area had burned before

45% of the perimeter overlaps earlier fires recorded since 2016: 11,184 ha in 2016, 137 ha in 2017, 18,784 ha in 2018, 1,298 ha in 2019, 1,683 ha in 2020, 500 ha in 2022, 115 ha in 2023, 11,290 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 38,684 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 54% of the area of London (850 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Zeysky District where it started
    51,543 ha reached on 11 May
    0.6 %
  2. 32,109 ha reached on 12 May
    1.9 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.85 ha
Residents≈ 30

Inside the perimeter there were about 0.85 hectares of built-up land and about 30 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
11 May 13.6 °C 18 % 42 km/h 0.0 mm Low 11
12 May 21.8 °C 19 % 25 km/h 0.0 mm Moderate 13
13 May 23.1 °C 16 % 37 km/h 0.0 mm High 22
14 May 16.7 °C 14 % 59 km/h 4.4 mm Very low 4
15 May 18.4 °C 14 % 32 km/h 0.0 mm Low 10
16 May 20.7 °C 20 % 43 km/h 0.2 mm Moderate 16
17 May 17.1 °C 20 % 39 km/h 0.0 mm Moderate 20
18 May 16.8 °C 17 % 36 km/h 0.0 mm Moderate 19
19 May 21.7 °C 19 % 24 km/h 0.0 mm Moderate 17
20 May 23.3 °C 22 % 24 km/h 0.0 mm Moderate 18
21 May 26.3 °C 19 % 30 km/h 0.0 mm High 25
22 May after 23.7 °C 38 % 50 km/h 0.9 mm Moderate 18
23 May after 15.9 °C 66 % 43 km/h 14.3 mm Very low 0

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 4 May 2026
After · 28 May 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 20 May 2026 the air beside the fire reached 576 µg/m³ of PM2.5. That day averaged 231: 15 times the WHO daily guideline (15).

PM2.5 peak576 µg/m³
Days over the guideline12 days
PM10583 µg/m³
Optical depth2.74
9 May13 May17 May21 May
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 2,470Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Zeysky District fire last?
GWIS (Copernicus) dates it between 11 May 2026 and 21 May 2026: 11 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 85,039 hectares (850.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Zeysky District (51,543 ha, 0.6 %); Magdagachinsky District (32,109 ha, 1.9 %).
What was the weather like?
During the fire the temperature reached 26.3 °C, humidity dropped to 14 % and gusts hit 59 km/h. The fire danger index (FWI) reached 25, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 2,470 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.