Skip to content
worldfires
RU · Russia · –

Zeysky District fire, 12 April 2018 Zeysky District

Out · last detection 24 Apr 2018, 04:51 UTC

The fire started on 12 April 2018 in Zeysky District, Russia, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 7,078 hectares from heat detections, spread across a single municipality.

It is the 206th largest in Amur Oblast since 2016 (of 491 with a page). Number 200 in Russia in 2018, of 540.

Burnt area
7,078ha
GWIS perimeter (Copernicus)
Duration
12days
12 Apr 2018 – 23 Apr 2018
Municipalities hit
1
districts
Started on
12 Apr
2018
Heat detections
343
in a single hotspot: 88 MW
Danger at start
9
Low · FWI index
Average daily power
370MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Apr23 Apr
24 Apr 2018

How it evolved, day by day

12 Apr 2018 · 44 MW · 13 13 Apr 2018 · 180 MW · 13 14 Apr 2018 · 334 MW · 29 15 Apr 2018 · 918 MW · 62 16 Apr 2018 · 775 MW · 82 17 Apr 2018 · 1,835 MW · 100 18 Apr 2018 · 105 MW · 14 20 Apr 2018 · 20 MW · 3 21 Apr 2018 · 35 MW · 4 22 Apr 2018 · 14 MW · 4 23 Apr 2018 · 130 MW · 14 24 Apr 2018 · 51 MW · 5
12 Apr 17 Apr 22 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

22°high
67km/h · peak gust
6%lowest humidity

It had gone 9 days without rain (1 mm or more) when it started.

This area had burned before

13% of the perimeter overlaps earlier fires recorded since 2016: 857 ha in 2016, 39 ha in 2017.

How big is it?

10 km
It burned the equivalent of 4.5% of the area of London (71 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Zeysky District where it started
    6,899 ha reached on 12 Apr
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.61 ha
Residents≈ 20

Inside the perimeter there were about 0.61 hectares of built-up land and about 20 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Apr 8.7 °C 20 % 27 km/h 0.0 mm Low 9
13 Apr 8.7 °C 19 % 34 km/h 0.0 mm Moderate 13
14 Apr 10.6 °C 15 % 32 km/h 0.0 mm Moderate 13
15 Apr 12.7 °C 14 % 20 km/h 0.0 mm Moderate 12
16 Apr 18.4 °C 15 % 32 km/h 0.0 mm Moderate 18
17 Apr 12.5 °C 16 % 38 km/h 0.0 mm Moderate 20
18 Apr 12.9 °C 14 % 20 km/h 0.0 mm Moderate 15
19 Apr 16.0 °C 17 % 67 km/h 0.2 mm High 23
20 Apr 10.1 °C 25 % 32 km/h 0.0 mm Moderate 17
21 Apr 10.3 °C 16 % 48 km/h 0.0 mm High 24
22 Apr 13.6 °C 6 % 27 km/h 0.0 mm Moderate 19
23 Apr 21.5 °C 14 % 25 km/h 0.0 mm Moderate 20
24 Apr after 24.0 °C 14 % 26 km/h 0.0 mm Moderate 20
25 Apr after 10.7 °C 22 % 41 km/h 0.3 mm Moderate 19
26 Apr after 6.7 °C 15 % 64 km/h 0.0 mm High 32
27 Apr after 13.3 °C 16 % 32 km/h 0.0 mm Moderate 18
28 Apr after 18.3 °C 20 % 54 km/h 0.1 mm High 22
29 Apr after 12.4 °C 21 % 52 km/h 0.0 mm High 28
30 Apr after 10.6 °C 16 % 47 km/h 0.1 mm High 31
1 May after 12.9 °C 27 % 33 km/h 0.0 mm High 24
2 May after 14.6 °C 16 % 22 km/h 0.0 mm Moderate 21
3 May after 19.9 °C 14 % 16 km/h 0.0 mm High 23

Its twins: fires that started in the same weather

It started with an FWI of 8.9, a minimum humidity of 20% and 9 days without rain. Fires in the area that started in weather like this since 2016: 19.

FWI at the start 8.9
Minimum humidity 20 %
Days without rain 9
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Zeysky District fire, May 2018
8,324 ha 8 days FWI 8.7 Min. humidity 21 % 55 km away, in 2018

First rain (1 mm or more) after it ended: 2.0 mm on 4 Jun.

What happened to them

6 days
median duration
7,207 ha
median area
26 %
went past 10,000 ha
2.7 mm
rain at the end (median; 19 of 19 had it)

It burned an area similar to its twins (7,078 ha against a median of 7,207 ha) and lasted 12 days, against 6 days.

All of them had rain in the ten days after the end: the first rainy day brought a median of 2.7 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
67km/h · max. gust

It was considered over on 23 Apr, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 19 of 19, with a median of 2.7 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Apr 2018
After · 30 Apr 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 343Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Zeysky District fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 12 April 2018 to 23 April 2018 (12 days). The perimeter dates it from 12 April 2018 to 18 April 2018.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 7,078 hectares (70.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Zeysky District (6,899 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 21.5 °C, humidity dropped to 6 % and gusts hit 67 km/h. The fire danger index (FWI) reached 24, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 19. Their median duration was 6 days and their median area 7,207 ha; 26 % went past 10,000 ha. All of them had rain in the ten days after the end: the first rainy day brought a median of 2.7 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 18 April 2018 → 23 April 2018.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 12 April 2018 to 18 April 2018. 343 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.