Skip to content
worldfires
CA · Canada · –

Yukon, Unorganized fire, 22 June 2019 Yukon, Unorganized

Out · last detection

The fire started on in Yukon, Unorganized, Canada, and satellites saw it burning for 33 days. Canada’s CWFIS (Natural Resources Canada) mapped an official burnt perimeter of 5,872 hectares from satellite imagery, spread across a single census subdivision.

It is number 66 by size of the 213 fires with a page that started in Yukon since 2016. Number 35 in Canada in 2019, of 97.

Burnt area
5,872ha
official perimeter (CWFIS)
Duration
33days
22 Jun 2019 – 24 Jul 2019
Census subdivisions hit
1
municipalities
Started on
22 Jun
2019
Heat detections
241
in a single hotspot: 201 MW
Danger at start
22
High · FWI index
Average daily power
295MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 22 Jun24 Jul
24 Jul 2019

How it evolved, day by day

23 Jun 2019 · 90 MW · 14 24 Jun 2019 · 590 MW · 25 25 Jun 2019 · 61 MW · 12 26 Jun 2019 · 724 MW · 52 27 Jun 2019 · 1,600 MW · 82 28 Jun 2019 · 46 MW · 10 29 Jun 2019 · 137 MW · 12 7 Jul 2019 · 36 MW · 3 9 Jul 2019 · 32 MW · 2 10 Jul 2019 · 63 MW · 14 23 Jul 2019 · 159 MW · 14 24 Jul 2019 · 2 MW · 1
23 Jun 27 Jun 10 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

25°high
59km/h · peak gust
15%lowest humidity

It had gone 5 days without rain (1 mm or more) when it started. Rain came after the fire: 8.7 mm on 25 Jul.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 3.7% of the area of London (59 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each census subdivision

  1. Yukon, Unorganized where it started
    5,750 ha
    0.0 %

Burnt area inside each census subdivision, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
22 Jun 21.7 °C 17 % 45 km/h 0.0 mm High 22
23 Jun 21.7 °C 22 % 40 km/h 0.0 mm High 22
24 Jun 21.8 °C 27 % 39 km/h 0.6 mm Moderate 16
25 Jun 19.3 °C 33 % 42 km/h 2.8 mm Very low 4
26 Jun 17.7 °C 24 % 27 km/h 0.0 mm Low 8
27 Jun 22.0 °C 15 % 28 km/h 0.0 mm Moderate 18
28 Jun 20.0 °C 25 % 31 km/h 0.3 mm Moderate 17
29 Jun 24.6 °C 34 % 48 km/h 0.2 mm High 22
30 Jun 22.5 °C 39 % 59 km/h 0.8 mm High 24
1 Jul 18.4 °C 58 % 32 km/h 5.5 mm Low 10
2 Jul 18.4 °C 45 % 35 km/h 0.0 mm Very low 2
3 Jul 21.2 °C 32 % 27 km/h 0.0 mm Low 7
4 Jul 20.7 °C 37 % 24 km/h 1.3 mm Low 8
5 Jul 22.3 °C 37 % 36 km/h 0.6 mm Low 6
6 Jul 21.7 °C 34 % 44 km/h 0.0 mm Moderate 21
7 Jul 20.3 °C 34 % 44 km/h 0.0 mm Moderate 21
8 Jul 20.1 °C 36 % 44 km/h 0.0 mm Moderate 21
9 Jul 22.1 °C 21 % 30 km/h 0.0 mm Moderate 20
10 Jul 24.1 °C 24 % 38 km/h 0.7 mm High 22
11 Jul 16.9 °C 57 % 31 km/h 5.5 mm Moderate 12
12 Jul 17.8 °C 40 % 24 km/h 0.0 mm Very low 1
13 Jul 20.4 °C 35 % 25 km/h 0.9 mm Very low 4
14 Jul 18.9 °C 56 % 35 km/h 3.6 mm Low 9
15 Jul 19.2 °C 58 % 31 km/h 2.8 mm Very low 2
16 Jul 19.4 °C 47 % 26 km/h 1.5 mm Very low 1
17 Jul 21.9 °C 42 % 27 km/h 1.9 mm Very low 4
18 Jul 23.3 °C 41 % 22 km/h 2.1 mm Very low 2
19 Jul 23.2 °C 36 % 34 km/h 0.0 mm Very low 3
20 Jul 22.4 °C 40 % 31 km/h 0.0 mm Low 10
21 Jul 22.0 °C 36 % 36 km/h 0.0 mm Moderate 11
22 Jul 25.1 °C 28 % 39 km/h 0.0 mm Moderate 17
23 Jul 24.1 °C 34 % 32 km/h 0.0 mm Moderate 18
24 Jul 22.7 °C 30 % 23 km/h 0.1 mm Moderate 16
25 Jul after 18.5 °C 36 % 27 km/h 8.7 mm Very low 1

Its twins: fires that started in the same weather

It started with an FWI of 22.1, a minimum humidity of 17% and 5 days without rain. Fires in the area that started in weather like this since 2016: 12.

FWI at the start 22.1
Minimum humidity 17 %
Days without rain 5
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Yukon, Unorganized fire, June 2016
12,084 ha 18 days FWI 22.1 Min. humidity 18 % 150 km away, in 2016

First rain (1 mm or more) after it ended: 4.0 mm on 8 Jul.

What happened to them

Fires in the area that started in similar weather: 12. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

8.7 mmfirst rain
25 Julthe day after it ended
59km/h · max. gust

It was considered over on 24 Jul, and on 25 Jul 8.7 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 15 Jun 2019
After · 31 Jul 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 241Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Canada

Frequently asked questions

How long did the Yukon, Unorganized fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 22 June 2019 to 24 July 2019 (33 days). The perimeter dates it from 22 June 2019 to 23 July 2019.
How much area did it burn?
The official perimeter mapped by Canada’s CWFIS (Natural Resources Canada) is 5,872 hectares (58.7 km²). Other tallies, such as those of provincial agencies, may give slightly different figures.
Which census subdivisions burned?
The fire only entered Yukon, Unorganized (5,750 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 25.1 °C, humidity dropped to 15 % and gusts hit 59 km/h. The fire danger index (FWI) reached 24, class High.
Where does this data come from?
From the official burnt perimeter of Canada’s CWFIS (NBAC, Natural Resources Canada) or, for the current season and until NBAC publishes it, the one rebuilt by GWIS (Copernicus); from NASA FIRMS VIIRS hotspots; and from the administrative boundaries of Canada. It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: NBAC (Natural Resources Canada), official.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 22 June 2019 to 23 July 2019. 241 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official: it comes from the National Burned Area Composite (NBAC) of the Canadian Wildland Fire Information System (CWFIS), Natural Resources Canada, which maps it on satellite imagery and publishes it under the Open Government Licence – Canada. Until NBAC publishes the current season, this year’s fires carry the perimeter rebuilt from heat detections by GWIS (Copernicus, CC BY 4.0), which is approximate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Census subdivision boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per census subdivision is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.