Skip to content
worldfires
UK · United Kingdom · –

Wiltshire fire, 11 July 2022 Wiltshire

Out · last detection 11 Jul 2022, 12:22 UTC

The fire started on 11 July 2022 in Wiltshire, United Kingdom, and satellites saw it burning for 3 days. Copernicus mapped a burnt perimeter of 327 hectares from satellite imagery, spread across a single municipality.

It is the 13th largest in England since 2016 (of 29 with a page). Number 3 in United Kingdom in 2022, of 9.

The power measured by the satellite is low (3.0 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
327ha
Copernicus perimeter
Duration
3days
11 Jul 2022 – 13 Jul 2022
Municipalities hit
1
districts
Started on
11 Jul
2022
Heat detections
1
in a single hotspot: 3 MW
Danger at start
15
Moderate · FWI index
Average daily power
3MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 11 Jul13 Jul

How it evolved, day by day

11 Jul 2022 · 3 MW · 1

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

28°high
28km/h · peak gust
40%lowest humidity

It had gone 8 days without rain (1 mm or more) when it started. Rain came after the fire: 7.2 mm on 20 Jul.

This area had burned before

87% of the perimeter overlaps earlier fires recorded since 2016: 257 ha in 2018, 31 ha in 2021.

What happened to each town

  1. Wiltshire where it started
    326 ha reached on 11 Jul
    0.1 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land100 %

Protected area affected (EFFIS layer): 100 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
11 Jul 28.0 °C 40 % 27 km/h 0.0 mm Moderate 15
12 Jul 28.0 °C 44 % 28 km/h 0.2 mm Moderate 13
13 Jul 25.4 °C 44 % 27 km/h 0.0 mm Moderate 15
14 Jul after 23.1 °C 37 % 38 km/h 0.0 mm High 23
15 Jul after 23.1 °C 40 % 37 km/h 0.0 mm Moderate 18
16 Jul after 26.1 °C 36 % 19 km/h 0.0 mm Moderate 14
17 Jul after 27.5 °C 26 % 43 km/h 0.2 mm High 33
18 Jul after 33.9 °C 21 % 34 km/h 0.1 mm High 31
19 Jul after 33.2 °C 30 % 49 km/h 0.1 mm Very high 44
20 Jul after 21.9 °C 67 % 31 km/h 7.2 mm Moderate 12

Its twins: fires that started in the same weather

It started with an FWI of 14.6, a minimum humidity of 40% and 8 days without rain. Fires in the area that started in weather like this since 2018: 24.

FWI at the start 14.6
Minimum humidity 40 %
Days without rain 8
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Wiltshire fire, June 2018
201 ha 1 day FWI 13.4 Min. humidity 42 % 2 km away, in 2018

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

3 days
median duration
222 ha
median area
21 %
went past 1,000 ha
6.3 mm
rain at the end (median; 18 of 24 had it)

It burned an area similar to its twins (327 ha against a median of 222 ha) and lasted 3 days, against 3 days.

In 6 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

7.2 mmfirst rain
20 Jul7 days after it ended
28km/h · max. gust

It was considered over on 13 Jul, and on 20 Jul 7.2 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 18 of 24, with a median of 6.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2018.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 4 Jul 2022
After · 20 Jul 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 12 July 2022 the air beside the fire reached 9 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak9 µg/m³
Days over the guideline0 days
PM1014 µg/m³
9 Jul11 Jul13 Jul15 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in United Kingdom

Frequently asked questions

How long did the Wiltshire fire last?
Copernicus dates it between 11 July 2022 and 13 July 2022: 3 days between the first and last image with fire.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 327 hectares (3.3 km²). Official national figures may differ.
Which municipalities burned?
The fire only entered Wiltshire (326 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 28.0 °C, humidity dropped to 40 % and gusts hit 28 km/h. The fire danger index (FWI) reached 15, class Moderate.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of United Kingdom (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2018 with a similar FWI, humidity and dry spell: 24. Their median duration was 3 days and their median area 222 ha; 21 % went past 1,000 ha. In 6 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 999 · 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 999 · 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. One Suomi-NPP VIIRS detection on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Government Licence v3.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.