Skip to content
worldfires
IN · India · –

West Bunghmun fire, March 2025 West Bunghmun

Out · last detection

The fire started on in West Bunghmun, India, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,666 hectares from heat detections, spread across a single municipality.

It is number 18 by size of the 35 fires with a page that started in Mizoram since 2016. Number 7 in India in 2025, of 14.

Burnt area
6,666ha
GWIS perimeter (Copernicus)
Duration
9days
7 Mar 2025 – 15 Mar 2025
Municipalities hit
1
subdistricts
Started on
7 Mar
2025
Heat detections
294
in a single hotspot: 322 MW
Danger at start
38
High · FWI index
Average daily power
2.0GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 7 Mar15 Mar
15 Mar 2025

How it evolved, day by day

7 Mar 2025 · 67 MW · 2 8 Mar 2025 · 318 MW · 10 9 Mar 2025 · 2,457 MW · 24 10 Mar 2025 · 112 MW · 3 11 Mar 2025 · 5,165 MW · 79 12 Mar 2025 · 3 MW · 1 13 Mar 2025 · 1,467 MW · 56 14 Mar 2025 · 5,481 MW · 77 15 Mar 2025 · 2,683 MW · 42
7 Mar 9 Mar 11 Mar 14 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
45km/h · peak gust
24%lowest humidity

It had gone 11 days without rain (1 mm or more) when it started. Rain came after the fire: 1.9 mm on 18 Mar.

This area had burned before

99% of the perimeter overlaps earlier fires recorded since 2016: 3,008 ha in 2016, 827 ha in 2017, 2,237 ha in 2018, 2,772 ha in 2019, 2,970 ha in 2020, 5,100 ha in 2021, 4,977 ha in 2022, 3,792 ha in 2023, 3,224 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 6,568 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 4.2% of the area of London (67 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. West Bunghmun where it started
    6,674 ha reached on 7 Mar
    5.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area1.4 ha
Residents≈ 450

Inside the perimeter there were about 1.4 hectares of built-up land and about 450 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
7 Mar 32.2 °C 27 % 34 km/h 0.0 mm High 38
8 Mar 32.0 °C 28 % 30 km/h 0.0 mm High 35
9 Mar 32.7 °C 31 % 26 km/h 0.0 mm High 34
10 Mar 34.5 °C 24 % 25 km/h 0.0 mm High 36
11 Mar 33.8 °C 30 % 26 km/h 0.0 mm High 37
12 Mar 33.0 °C 37 % 38 km/h 0.0 mm Very high 42
13 Mar 34.6 °C 33 % 45 km/h 0.0 mm Very high 47
14 Mar 34.0 °C 41 % 40 km/h 0.0 mm Very high 41
15 Mar 35.0 °C 39 % 34 km/h 0.0 mm High 37
16 Mar after 35.3 °C 39 % 35 km/h 0.0 mm Very high 38
17 Mar after 34.5 °C 39 % 38 km/h 0.8 mm Very high 38
18 Mar after 33.7 °C 49 % 40 km/h 1.9 mm High 27

Its twins: fires that started in the same weather

It started with an FWI of 37.5, a minimum humidity of 27% and 11 days without rain. Fires in the area that started in weather like this since 2016: 21.

FWI at the start 37.5
Minimum humidity 27 %
Days without rain 11
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

West Bunghmun fire, March 2022
21,730 ha 12 days FWI 33.9 Min. humidity 27 % 2 km away, in 2022

First rain (1 mm or more) after it ended: 2.0 mm on 26 Mar.

What happened to them

8 days
median duration
3,072 ha
median area
100 %
went past 1,000 ha
1.6 mm
rain at the end (median; 14 of 21 had it)

It was 2.2 times larger than the median of its twins and lasted 9 days, against 8 days.

Only 4 of its 21 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 7 of 21, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.9 mmfirst rain
18 Mar3 days after it ended
45km/h · max. gust

It was considered over on 15 Mar, and on 18 Mar 1.9 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 14 of 21, with a median of 1.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 28 Feb 2025
After · 22 Mar 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 8 March 2025 the air beside the fire reached 199 µg/m³ of PM2.5. That day averaged 102: 6.8 times the WHO daily guideline (15).

PM2.5 peak199 µg/m³
Days over the guideline14 days
PM10212 µg/m³
Optical depth1.47
5 Mar8 Mar11 Mar14 Mar17 Mar
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 294Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in India

Frequently asked questions

How long did the West Bunghmun fire last?
GWIS (Copernicus) dates it between 7 March 2025 and 15 March 2025: 9 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,666 hectares (66.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered West Bunghmun (6,674 ha, 5.6 %).
What was the weather like?
During the fire the temperature reached 35.0 °C, humidity dropped to 24 % and gusts hit 45 km/h. The fire danger index (FWI) reached 47, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of India (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 21. Their median duration was 8 days and their median area 3,072 ha; 100 % went past 1,000 ha. Only 4 of its 21 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 7 of 21, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 294 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.