Skip to content
worldfires
AU · Australia · –

West Arnhem fire, 24 August 2021 West Arnhem

Out · last detection 4 Sept 2021, 05:30 UTC

The fire started on 24 August 2021 in West Arnhem, Australia, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 11,504 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Compare with…
Burnt area
11,504ha
GWIS perimeter (Copernicus)
Duration
12days
24 Aug 2021 – 4 Sept 2021
Municipalities hit
1
local government areas
Started on
24 Aug
2021
Heat detections
483
in a single hotspot: 36 MW
Danger at start
33
High · FWI index
Average daily power
218MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 24 Aug4 Sept
4 Sept 2021

How it evolved, day by day

24 Aug 2021 · 64 MW · 9 25 Aug 2021 · 294 MW · 88 26 Aug 2021 · 354 MW · 65 27 Aug 2021 · 336 MW · 64 28 Aug 2021 · 610 MW · 103 29 Aug 2021 · 295 MW · 68 30 Aug 2021 · 125 MW · 41 31 Aug 2021 · 234 MW · 37 1 Sept 2021 · 63 MW · 3 2 Sept 2021 · 9 MW · 2 4 Sept 2021 · 15 MW · 3
24 Aug 28 Aug 2 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
44km/h · peak gust
10%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

93% of the perimeter overlaps earlier fires recorded since 2016: 2,804 ha in 2016, 3,228 ha in 2017, 4,188 ha in 2018, 7,166 ha in 2019, 5,903 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 10,741 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 7.3% of the area of London (115 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. West Arnhem where it started
    11,609 ha reached on 24 Aug
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 34 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
24 Aug 32.6 °C 37 % 44 km/h 0.7 mm High 33
25 Aug 32.4 °C 18 % 42 km/h 0.0 mm Very high 43
26 Aug 33.9 °C 19 % 41 km/h 0.0 mm Very high 46
27 Aug 34.5 °C 11 % 39 km/h 0.0 mm Extreme 50
28 Aug 34.4 °C 13 % 43 km/h 0.0 mm Extreme 54
29 Aug 35.3 °C 11 % 39 km/h 0.0 mm Extreme 51
30 Aug 35.9 °C 10 % 35 km/h 0.0 mm Extreme 52
31 Aug 36.0 °C 17 % 35 km/h 0.0 mm Extreme 50
1 Sept 35.1 °C 34 % 35 km/h 0.0 mm Very high 41
2 Sept 35.2 °C 32 % 38 km/h 0.0 mm Very high 39
3 Sept 35.8 °C 28 % 41 km/h 0.0 mm Very high 40
4 Sept 36.3 °C 24 % 29 km/h 0.0 mm Very high 39
5 Sept after 33.7 °C 31 % 45 km/h 0.0 mm Very high 46
6 Sept after 32.7 °C 21 % 48 km/h 0.0 mm Very high 46
7 Sept after 32.0 °C 18 % 54 km/h 0.0 mm Extreme 52
8 Sept after 33.9 °C 18 % 58 km/h 0.0 mm Extreme 57
9 Sept after 33.9 °C 25 % 53 km/h 0.0 mm Extreme 54
10 Sept after 34.3 °C 27 % 49 km/h 0.0 mm Very high 49
11 Sept after 35.8 °C 23 % 30 km/h 0.0 mm Very high 42
12 Sept after 35.1 °C 29 % 24 km/h 0.0 mm High 38
13 Sept after 35.2 °C 35 % 27 km/h 0.3 mm Very high 38
14 Sept after 36.8 °C 28 % 32 km/h 0.0 mm High 37

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 17 Aug 2021
After · 11 Sept 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 483Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the West Arnhem fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 24 August 2021 to 4 September 2021 (12 days). The perimeter dates it from 25 August 2021 to 4 September 2021.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 11,504 hectares (115.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered West Arnhem (11,609 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 36.3 °C, humidity dropped to 10 % and gusts hit 44 km/h. The fire danger index (FWI) reached 54, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 25 August 2021 → 24 August 2021.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 25 August 2021 to 4 September 2021. 483 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.