Skip to content
worldfires
AU · Australia · →

West Arnhem fire, 10 July 2020 West Arnhem

Out · last detection 16 Aug 2020, 03:49 UTC

The fire started on 10 July 2020 in West Arnhem, Australia, and satellites saw it burning for 38 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 11,915 hectares from heat detections, spread across a single municipality.

It is the 1188th largest in Northern Territory since 2016 (of 3518 with a page). Number 85 in Australia in 2020, of 320.

Compare with…
Burnt area
11,915ha
GWIS perimeter (Copernicus)
Duration
38days
10 Jul 2020 – 16 Aug 2020
Municipalities hit
1
local government areas
Started on
10 Jul
2020
Heat detections
507
in a single hotspot: 66 MW
Danger at start
31
High · FWI index
Average daily power
131MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 10 Jul16 Aug
16 Aug 2020

How it evolved, day by day

10 Jul 2020 · 3 MW · 1 11 Jul 2020 · 16 MW · 3 13 Jul 2020 · 6 MW · 1 14 Jul 2020 · 4 MW · 1 15 Jul 2020 · 133 MW · 11 16 Jul 2020 · 500 MW · 26 17 Jul 2020 · 153 MW · 21 18 Jul 2020 · 118 MW · 19 19 Jul 2020 · 19 MW · 3 20 Jul 2020 · 47 MW · 6 21 Jul 2020 · 28 MW · 9 22 Jul 2020 · 162 MW · 35 23 Jul 2020 · 160 MW · 28 24 Jul 2020 · 48 MW · 6 25 Jul 2020 · 19 MW · 4 26 Jul 2020 · 270 MW · 31 27 Jul 2020 · 353 MW · 47 28 Jul 2020 · 966 MW · 86 29 Jul 2020 · 573 MW · 72 30 Jul 2020 · 196 MW · 18 31 Jul 2020 · 117 MW · 18 1 Aug 2020 · 91 MW · 12 2 Aug 2020 · 59 MW · 6 3 Aug 2020 · 6 MW · 2 4 Aug 2020 · 15 MW · 1 5 Aug 2020 · 13 MW · 2 6 Aug 2020 · 85 MW · 9 8 Aug 2020 · 78 MW · 8 9 Aug 2020 · 45 MW · 6 11 Aug 2020 · 12 MW · 6 12 Aug 2020 · 24 MW · 6 15 Aug 2020 · 3 MW · 1 16 Aug 2020 · 8 MW · 2
10 Jul 16 Jul 21 Jul 26 Jul 28 Jul 31 Jul 5 Aug 12 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
51km/h · peak gust
17%lowest humidity

It had gone 48 days without rain (1 mm or more) when it started.

This area had burned before

100% of the perimeter overlaps earlier fires recorded since 2016: 10,385 ha in 2016, 1,323 ha in 2017, 11,324 ha in 2018, 575 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 11,869 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 7.5% of the area of London (119 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. West Arnhem where it started
    11,936 ha reached on 10 Jul
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
10 Jul 31.1 °C 46 % 47 km/h 0.0 mm High 31
11 Jul 31.0 °C 48 % 48 km/h 0.0 mm High 30
12 Jul 31.9 °C 36 % 45 km/h 0.0 mm High 31
13 Jul 30.9 °C 25 % 48 km/h 0.0 mm Very high 39
14 Jul 29.8 °C 37 % 40 km/h 0.0 mm High 33
15 Jul 30.1 °C 47 % 42 km/h 0.0 mm High 29
16 Jul 30.0 °C 30 % 43 km/h 0.0 mm High 33
17 Jul 29.7 °C 28 % 39 km/h 0.0 mm High 33
18 Jul 30.5 °C 33 % 37 km/h 0.0 mm High 33
19 Jul 28.3 °C 43 % 41 km/h 0.0 mm High 31
20 Jul 28.6 °C 31 % 44 km/h 0.0 mm High 33
21 Jul 30.6 °C 25 % 37 km/h 0.0 mm High 34
22 Jul 31.1 °C 20 % 41 km/h 0.0 mm Very high 40
23 Jul 29.9 °C 34 % 38 km/h 0.0 mm High 35
24 Jul 29.7 °C 42 % 35 km/h 0.0 mm High 31
25 Jul 30.7 °C 33 % 40 km/h 0.0 mm High 32
26 Jul 30.9 °C 29 % 45 km/h 0.0 mm High 37
27 Jul 30.9 °C 28 % 40 km/h 0.0 mm High 36
28 Jul 30.1 °C 24 % 40 km/h 0.0 mm High 38
29 Jul 30.1 °C 23 % 43 km/h 0.0 mm Very high 40
30 Jul 29.1 °C 17 % 45 km/h 0.0 mm Very high 45
31 Jul 28.8 °C 33 % 51 km/h 0.0 mm Very high 43
1 Aug 29.0 °C 34 % 49 km/h 0.0 mm Very high 40
2 Aug 27.5 °C 44 % 42 km/h 0.0 mm High 32
3 Aug 29.6 °C 43 % 39 km/h 0.0 mm High 30
4 Aug 30.2 °C 37 % 35 km/h 0.0 mm High 29
5 Aug 30.2 °C 42 % 28 km/h 0.0 mm High 28
6 Aug 30.2 °C 46 % 23 km/h 0.0 mm High 24
7 Aug 31.0 °C 40 % 23 km/h 0.0 mm High 26
8 Aug 31.1 °C 35 % 36 km/h 0.0 mm High 31
9 Aug 31.1 °C 34 % 35 km/h 0.0 mm High 30
10 Aug 30.4 °C 29 % 38 km/h 0.0 mm High 34
11 Aug 31.0 °C 33 % 33 km/h 0.0 mm High 33
12 Aug 30.2 °C 39 % 32 km/h 0.0 mm High 32
13 Aug 30.5 °C 48 % 32 km/h 0.0 mm High 28
14 Aug 30.6 °C 48 % 35 km/h 0.0 mm High 29
15 Aug 31.0 °C 45 % 36 km/h 0.0 mm High 29
16 Aug 30.5 °C 44 % 36 km/h 0.0 mm High 29
17 Aug after 31.1 °C 33 % 41 km/h 0.0 mm High 33
18 Aug after 30.7 °C 32 % 28 km/h 0.0 mm High 30
19 Aug after 31.3 °C 35 % 25 km/h 0.0 mm High 30
20 Aug after 31.1 °C 43 % 33 km/h 0.0 mm High 31
21 Aug after 30.7 °C 46 % 40 km/h 0.0 mm High 32
22 Aug after 32.5 °C 27 % 37 km/h 0.0 mm High 36
23 Aug after 32.3 °C 20 % 48 km/h 0.0 mm Very high 48
24 Aug after 30.6 °C 20 % 50 km/h 0.0 mm Very high 49
25 Aug after 30.5 °C 23 % 49 km/h 0.0 mm Very high 49
26 Aug after 31.3 °C 28 % 54 km/h 0.0 mm Very high 50

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 3 Jul 2020
After · 23 Aug 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 507Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia ›

Frequently asked questions

How long did the West Arnhem fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 10 July 2020 to 16 August 2020 (38 days). The perimeter dates it from 16 July 2020 to 9 August 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 11,915 hectares (119.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered West Arnhem (11,936 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 31.9 °C, humidity dropped to 17 % and gusts hit 51 km/h. The fire danger index (FWI) reached 45, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings ›

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 9 August 2020 → 16 August 2020.
  2. Start date: 16 July 2020 → 10 July 2020.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 16 July 2020 to 9 August 2020. 507 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.