Skip to content
worldfires
RU · Russia · –

Vilyuysky Ulus fire, 29 June 2020 Vilyuysky Ulus, Verkhnevilyuysky Ulus

Out · last detection 19 Jul 2020, 06:17 UTC

The fire started on 29 June 2020 in Vilyuysky Ulus, Russia, and satellites saw it burning for 21 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 33,346 hectares from heat detections, spread across 2 municipalities.

It is the 123th largest in Sakha Republic since 2016 (of 1347 with a page). Number 31 in Russia in 2020, of 592.

Burnt area
33,346ha
GWIS perimeter (Copernicus)
Duration
21days
29 Jun 2020 – 19 Jul 2020
Municipalities hit
2
districts
Started on
29 Jun
2020
Heat detections
2,750
in a single hotspot: 888 MW
Danger at start
23
High · FWI index
Average daily power
4.6GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 29 Jun19 Jul
19 Jul 2020

How it evolved, day by day

29 Jun 2020 · 64 MW · 10 30 Jun 2020 · 1,717 MW · 100 1 Jul 2020 · 2,390 MW · 56 2 Jul 2020 · 6,880 MW · 310 4 Jul 2020 · 42 MW · 7 5 Jul 2020 · 1,328 MW · 66 7 Jul 2020 · 25 MW · 4 8 Jul 2020 · 152 MW · 24 9 Jul 2020 · 4,443 MW · 114 10 Jul 2020 · 5,572 MW · 183 11 Jul 2020 · 305 MW · 63 12 Jul 2020 · 41,820 MW · 846 13 Jul 2020 · 6,310 MW · 246 14 Jul 2020 · 1,961 MW · 199 15 Jul 2020 · 1,741 MW · 135 16 Jul 2020 · 491 MW · 167 17 Jul 2020 · 1,494 MW · 97 19 Jul 2020 · 5,527 MW · 123
29 Jun 4 Jul 9 Jul 12 Jul 17 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
59km/h · peak gust
24%lowest humidity

It had gone 11 days without rain (1 mm or more) when it started. Rain came after the fire: 4.0 mm on 20 Jul.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 21% of the area of London (333 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Vilyuysky Ulus where it started
    33,398 ha reached on 29 Jun
    0.6 %
  2. 2,452 ha reached on 10 Jul
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
29 Jun 28.7 °C 31 % 27 km/h 0.0 mm High 23
30 Jun 31.3 °C 31 % 20 km/h 0.0 mm Moderate 21
1 Jul 32.6 °C 26 % 25 km/h 0.0 mm Moderate 20
2 Jul 24.5 °C 32 % 58 km/h 0.0 mm High 37
3 Jul 16.1 °C 57 % 59 km/h 0.3 mm Moderate 21
4 Jul 14.5 °C 49 % 52 km/h 0.0 mm High 21
5 Jul 16.6 °C 37 % 44 km/h 0.0 mm High 23
6 Jul 11.9 °C 51 % 22 km/h 0.3 mm Moderate 14
7 Jul 16.2 °C 43 % 19 km/h 0.0 mm Moderate 13
8 Jul 22.2 °C 30 % 17 km/h 0.0 mm Moderate 15
9 Jul 24.3 °C 28 % 31 km/h 0.0 mm High 28
10 Jul 25.7 °C 31 % 38 km/h 0.0 mm High 30
11 Jul 26.3 °C 46 % 43 km/h 0.8 mm High 22
12 Jul 28.3 °C 24 % 39 km/h 0.2 mm High 27
13 Jul 26.2 °C 32 % 32 km/h 0.0 mm High 24
14 Jul 28.3 °C 27 % 21 km/h 0.0 mm High 23
15 Jul 28.2 °C 34 % 25 km/h 0.0 mm High 27
16 Jul 27.1 °C 36 % 28 km/h 1.6 mm High 28
17 Jul 23.2 °C 36 % 27 km/h 0.1 mm Low 10
18 Jul 20.3 °C 54 % 19 km/h 0.4 mm Low 8
19 Jul 22.0 °C 41 % 39 km/h 0.0 mm High 22
20 Jul after 18.1 °C 69 % 24 km/h 4.0 mm Moderate 15

Its twins: fires that started in the same weather

It started with an FWI of 22.9, a minimum humidity of 31% and 11 days without rain. Fires in the area that started in weather like this since 2016: 33.

FWI at the start 22.9
Minimum humidity 31 %
Days without rain 11
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Vilyuysky Ulus fire, July 2021
36,302 ha 30 days FWI 21.9 Min. humidity 31 % 166 km away, in 2021

First rain (1 mm or more) after it ended: 4.9 mm on 18 Aug.

What happened to them

11 days
median duration
10,272 ha
median area
52 %
went past 10,000 ha
4.2 mm
rain at the end (median; 33 of 33 had it)

It was 3.2 times larger than the median of its twins and lasted 21 days, against 11 days.

Only 8 of its 33 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 4.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

4.0 mmfirst rain
20 Julthe day after it ended
59km/h · max. gust

It was considered over on 19 Jul, and on 20 Jul 4.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 33 of 33, with a median of 4.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 22 Jun 2020
After · 26 Jul 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 2,750Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Vilyuysky Ulus fire last?
GWIS (Copernicus) dates it between 29 June 2020 and 19 July 2020: 21 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 33,346 hectares (333.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Vilyuysky Ulus (33,398 ha, 0.6 %); Verkhnevilyuysky Ulus (2,452 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 32.6 °C, humidity dropped to 24 % and gusts hit 59 km/h. The fire danger index (FWI) reached 37, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 33. Their median duration was 11 days and their median area 10,272 ha; 52 % went past 10,000 ha. Only 8 of its 33 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 4.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 4 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 2,750 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.