Skip to content
worldfires
PY · Paraguay · –

Villa Oliva fire, 27 July 2021 Villa Oliva, Quiindy, Nueva Italia

Out · last detection 2 Aug 2021, 17:36 UTC

The fire started on 27 July 2021 in Villa Oliva, Paraguay, and satellites saw it burning for 7 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,141 hectares from heat detections, spread across 3 municipalities.

It is the 13th largest in Ñeembucú since 2016 (of 60 with a page). Number 61 in Paraguay in 2021, of 250.

Burnt area
4,141ha
GWIS perimeter (Copernicus)
Duration
7days
27 Jul 2021 – 2 Aug 2021
Municipalities hit
3
districts
Started on
27 Jul
2021
Heat detections
151
in a single hotspot: 119 MW
Danger at start
25
High · FWI index
Average daily power
616MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 27 Jul2 Aug
2 Aug 2021

How it evolved, day by day

27 Jul 2021 · 175 MW · 12 28 Jul 2021 · 344 MW · 16 29 Jul 2021 · 864 MW · 25 30 Jul 2021 · 2,256 MW · 90 1 Aug 2021 · 15 MW · 4 2 Aug 2021 · 44 MW · 4
27 Jul 30 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

24°high
54km/h · peak gust
24%lowest humidity

It had gone 11 days without rain (1 mm or more) when it started.

This area had burned before

96% of the perimeter overlaps earlier fires recorded since 2016: 489 ha in 2016, 656 ha in 2018, 1,203 ha in 2019, 5,004 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 3,981 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.6% of the area of London (41 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Villa Oliva where it started
    4,124 ha reached on 27 Jul
    2.6 %
  2. 23 ha
    0.0 %
  3. 12 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 23 % of the area in Paraguay

Day High Min. humidity Peak gust Rain Danger (FWI)
27 Jul 16.0 °C 30 % 54 km/h 0.0 mm High 25
28 Jul 16.0 °C 29 % 50 km/h 0.0 mm High 24
29 Jul 15.3 °C 32 % 21 km/h 0.0 mm Moderate 12
30 Jul 18.9 °C 24 % 29 km/h 0.0 mm Moderate 15
31 Jul 20.4 °C 32 % 30 km/h 0.0 mm Moderate 18
1 Aug 24.1 °C 29 % 21 km/h 0.0 mm Moderate 15
2 Aug 24.2 °C 31 % 25 km/h 0.0 mm Moderate 17
3 Aug after 23.5 °C 29 % 24 km/h 0.0 mm Moderate 18
4 Aug after 25.7 °C 29 % 22 km/h 0.0 mm Moderate 16
5 Aug after 25.6 °C 40 % 30 km/h 0.0 mm Moderate 19
6 Aug after 27.0 °C 43 % 32 km/h 0.0 mm High 23
7 Aug after 32.9 °C 30 % 50 km/h 0.0 mm Very high 40
8 Aug after 33.5 °C 29 % 49 km/h 0.0 mm Very high 42
9 Aug after 25.2 °C 44 % 44 km/h 0.0 mm High 29
10 Aug after 13.8 °C 75 % 38 km/h 0.7 mm Low 10
11 Aug after 16.2 °C 53 % 40 km/h 0.0 mm Moderate 12
12 Aug after 17.4 °C 37 % 36 km/h 0.0 mm Moderate 20

Its twins: fires that started in the same weather

It started with an FWI of 25.2, a minimum humidity of 30% and 11 days without rain. Fires in the area that started in weather like this since 2016: 36.

FWI at the start 25.2
Minimum humidity 30 %
Days without rain 11
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Caapucu fire, February 2023
2,560 ha 10 days FWI 25.2 Min. humidity 31 % 25 km away, in 2023

First rain (1 mm or more) after it ended: 27.0 mm on 14 Feb.

What happened to them

7 days
median duration
2,168 ha
median area
100 %
went past 1,000 ha
7.7 mm
rain at the end (median; 36 of 36 had it)

It was 1.9 times larger than the median of its twins and lasted 7 days, against 7 days.

Only 6 of its 36 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 7.7 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
54km/h · max. gust

It was considered over on 2 Aug, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 36 of 36, with a median of 7.7 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 20 Jul 2021
After · 9 Aug 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 151Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Paraguay

Frequently asked questions

How long did the Villa Oliva fire last?
GWIS (Copernicus) dates it between 27 July 2021 and 2 August 2021: 7 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,141 hectares (41.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Villa Oliva (4,124 ha, 2.6 %); Quiindy (23 ha, 0.0 %); Nueva Italia (12 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 24.2 °C, humidity dropped to 24 % and gusts hit 54 km/h. The fire danger index (FWI) reached 25, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Paraguay (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 36. Their median duration was 7 days and their median area 2,168 ha; 100 % went past 1,000 ha. Only 6 of its 36 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 7.7 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 132 · 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 132 · 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 151 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.