Vila Boa de Quires e Maureles fire, August 2016
Vila Boa de Quires e Maureles, Croca, Recezinhos (São Martinho)
Out · last detection 8 Aug 2016, 13:16 UTC
The fire started on 6 August 2016 in Vila Boa de Quires e Maureles, Portugal, and satellites saw it burning for 5 days. Copernicus mapped a burnt perimeter of 354 hectares from satellite imagery, spread across 3 freguesias.
It is the 8th largest in Marco de Canaveses since 2016 (of 14 with a page). Number 75 in Portugal in 2016, of 180.
matches the official recordwith caveatssatellite onlymodel
When copying, the sentence is
Tick the figures you want: they make up the lede and the CSV.
Burned area
with caveats
354ha
Perimeter published by EFFIS (Copernicus).
This page354ICNF166
Source
EFFIS (Copernicus)
Date
perimeter revised on 26 January 2022
+− cross-check
ICNF: 166 ha (matched records: 3). Difference between the page and the official record: +112.8%. Matched on 15 November 2026. The two figures differ a lot, so these may not be exactly the same fire: take them as nearby records.
Duration by satellite
satellite only
5days
6 Aug 2016 to 10 Aug 2016: first and last day with fire on the page.
Source
EFFIS (Copernicus) · NASA FIRMS · VIIRS
Date
last detection: 8 Aug 2016, 13:16 UTC
+− cross-check
Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.
Start
satellite only
6 Aug 2016
First day with fire seen by the satellites or the perimeter.
Source
EFFIS (Copernicus) · NASA FIRMS · VIIRS
Date
6 Aug 2016
+− cross-check
The two figures differ a lot, so these may not be exactly the same fire: take them as nearby records.
Hotspots
satellite only
29
VIIRS detections at 375 m. Most intense hotspot: 47 MW.
Source
NASA FIRMS · VIIRS (Suomi NPP)
Date
6 Aug 2016 – 10 Aug 2016
+− cross-check
There is no official record to compare with. Each hotspot is a pixel detected in one satellite pass, not a separate fire.
The worst day
satellite only
175MW
Total radiative power on 7 August 2016; hotspots that day: 6.
Source
NASA FIRMS · VIIRS (FRP)
Date
7 Aug 2016
+− cross-check
Fire radiative power (FRP) measures the energy the fire gives off when the satellite passes. Added up by day, it compares intensity, not area.
Danger at the start
model
51.3FWI · extreme
Fire Weather Index (Canadian system) computed by WorldFires for the day the fire started. Consecutive days without rain before: 1.
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings ›
Weather during the fire
model
37.0°C · 22% RH
High of 37.0 °C and minimum humidity of 22% on 8 August 2016; gusts of 57 km/h on 10 August 2016.
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
ⓘThis page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
· reconstructedofficial
Matched with the official ICNF record
Nearby records with very different figures: 166 ha (records: 3).
A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
Burnt area inside each freguesia, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
What burned
Scrub and transitional woodland91 %
Agricultural areas8.8 %
Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.
Official record
Several official records match this area
According to ICNF, 3 fires started inside this perimeter on these dates, totalling 166 ha (the satellite measured 354 ha). The two figures differ a lot, so these may not be exactly the same fire: take them as nearby records.
ICNF records each fire that started at a different time or place separately; the satellite sees a single burned area, so this page groups them together. The numbers on the map show where each one started.
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
It stayed below its twins: 354 ha against a median of 981 ha. It lasted 5 days, against 2 days.
In 17 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 7.9 mm.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
1.3 mmfirst rain
17 Aug7 days after it ended
57km/h · max. gust
It was considered over on 10 Aug, and on 17 Aug 1.3 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 6 of 23, with a median of 7.9 mm.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
Same area: fires that have already ended, less than 250 km from this one, since 2016.
Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
They are sorted by similarity, and the outlines of the first five are drawn.
Drag the line to compare the same ground before the fire and after it.
↔
Before · 30 Jul 2016
After · 17 Aug 2016
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · Copernicus
On 8 August 2016 the air beside the fire reached 60 µg/m³ of PM2.5. That day averaged 28: 1.8 times the WHO daily guideline (15).
PM2.5 peak60µg/m³
Days over the guideline5days
PM1071µg/m³
WHO 15
4 Aug6 Aug8 Aug10 Aug
GoodFairModeratePoorVery poorExtremely poor
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table· 29Every satellite heat detection, one by one, with time, satellite, power and coordinates.›
⬇ Download CSVTimes in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
How long did the Vila Boa de Quires e Maureles fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 6 August 2016 to 10 August 2016 (5 days). The perimeter dates it from 7 August 2016 to 8 August 2016.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 354 hectares (3.5 km²). Official national figures may differ.
Which freguesias burned?
The fire entered 3 freguesias: Vila Boa de Quires e Maureles (206 ha, 11 %); Croca (112 ha, 17 %); Recezinhos (São Martinho) (36 ha, 6.9 %).
Did the fire reach a town?
The fire came within 0.8 km of the centre of Recezinhos (São Martinho), the closest of the areas it touched. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 37.0 °C, humidity dropped to 16 % and gusts hit 57 km/h. The fire danger index (FWI) reached 58, class Extreme.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Portugal (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 23. Their median duration was 2 days and their median area 981 ha; 48 % went past 1,000 ha. In 17 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 7.9 mm.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
⚑Report an errorHow we know this›
Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
Dates adjusted with the VIIRS detections inside the perimeter, which said 7 August 2016 to 8 August 2016. 29 Suomi-NPP VIIRS detections on those dates.
Compared with ICNF: 166 official ha against 354 ha of perimeter; similar, but with reservations.
Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Freguesia boundaries come from geoBoundaries ADM3 (CC0 1.0 Universal (CC0 1.0) Public Domain Dedication). The area per freguesia is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.