Skip to content
worldfires
AU · Australia · –

Victoria Daly fire, 8 October 2022 Victoria Daly

Out · last detection

The fire started on in Victoria Daly, Australia, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 11,014 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
11,014ha
GWIS perimeter (Copernicus)
Duration
10days
8 Oct 2022 – 17 Oct 2022
Municipalities hit
1
local government areas
Started on
8 Oct
2022
Heat detections
583
in a single hotspot: 160 MW
Danger at start
13
Moderate · FWI index
Average daily power
633MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 8 Oct17 Oct
17 Oct 2022

How it evolved, day by day

9 Oct 2022 · 129 MW · 36 10 Oct 2022 · 2,028 MW · 158 11 Oct 2022 · 1,000 MW · 99 12 Oct 2022 · 220 MW · 73 13 Oct 2022 · 1,137 MW · 105 14 Oct 2022 · 473 MW · 47 15 Oct 2022 · 107 MW · 17 16 Oct 2022 · 446 MW · 33 17 Oct 2022 · 160 MW · 15
10 Oct 13 Oct 15 Oct 17 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
46km/h · peak gust
19%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 10.2 mm on 18 Oct.

This area had burned before

53% of the perimeter overlaps earlier fires recorded since 2016: 1,325 ha in 2016, 2,272 ha in 2017, 2,832 ha in 2018, 374 ha in 2019, 1,189 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 5,857 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 7% of the area of London (110 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Victoria Daly where it started
    11,019 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.29 ha
Residents< 20

Inside the perimeter there were about 0.29 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
8 Oct 36.3 °C 34 % 30 km/h 0.4 mm Moderate 13
9 Oct 34.4 °C 41 % 46 km/h 0.0 mm High 33
10 Oct 37.3 °C 19 % 42 km/h 0.0 mm Very high 48
11 Oct 38.3 °C 21 % 28 km/h 0.0 mm High 37
12 Oct 37.8 °C 26 % 34 km/h 0.0 mm High 38
13 Oct 38.0 °C 27 % 27 km/h 0.0 mm High 37
14 Oct 37.4 °C 33 % 31 km/h 0.3 mm High 36
15 Oct 37.4 °C 31 % 27 km/h 0.0 mm High 37
16 Oct 38.0 °C 29 % 26 km/h 0.0 mm High 31
17 Oct 36.7 °C 34 % 31 km/h 0.0 mm Very high 39
18 Oct after 36.7 °C 37 % 29 km/h 10.2 mm High 36

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 1 Oct 2022
After · 24 Oct 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 11 October 2022 the air beside the fire reached 87 µg/m³ of PM2.5. That day averaged 40: 2.6 times the WHO daily guideline (15).

PM2.5 peak87 µg/m³
Days over the guideline6 days
PM10126 µg/m³
Optical depth1.14
6 Oct9 Oct12 Oct15 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 583Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Victoria Daly fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 8 October 2022 to 17 October 2022 (10 days). The perimeter dates it from 8 October 2022 to 14 October 2022.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 11,014 hectares (110.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Victoria Daly (11,019 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 38.3 °C, humidity dropped to 19 % and gusts hit 46 km/h. The fire danger index (FWI) reached 48, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 14 October 2022 → 17 October 2022.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 8 October 2022 to 14 October 2022. 583 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.