Skip to content
worldfires
AU · Australia · –

Victoria Daly fire, 4 September 2019 Victoria Daly

Out · last detection 18 Sept 2019, 04:33 UTC

The fire started on 4 September 2019 in Victoria Daly, Australia, and satellites saw it burning for 15 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 29,081 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
29,081ha
GWIS perimeter (Copernicus)
Duration
15days
4 Sept 2019 – 18 Sept 2019
Municipalities hit
1
local government areas
Started on
4 Sept
2019
Heat detections
1,289
in a single hotspot: 160 MW
Danger at start
43
Very high · FWI index
Average daily power
863MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 4 Sept18 Sept
18 Sept 2019

How it evolved, day by day

4 Sept 2019 · 141 MW · 11 5 Sept 2019 · 223 MW · 31 6 Sept 2019 · 2,107 MW · 62 7 Sept 2019 · 2,525 MW · 115 8 Sept 2019 · 926 MW · 87 9 Sept 2019 · 2,072 MW · 265 10 Sept 2019 · 1,258 MW · 178 11 Sept 2019 · 597 MW · 116 12 Sept 2019 · 1,188 MW · 100 13 Sept 2019 · 548 MW · 107 14 Sept 2019 · 1,012 MW · 139 15 Sept 2019 · 291 MW · 59 16 Sept 2019 · 41 MW · 14 17 Sept 2019 · 16 MW · 4 18 Sept 2019 · 4 MW · 1
4 Sept 7 Sept 10 Sept 13 Sept 16 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
53km/h · peak gust
4%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

84% of the perimeter overlaps earlier fires recorded since 2016: 13,428 ha in 2016, 9,821 ha in 2017, 16,768 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 24,361 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 18% of the area of London (291 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Victoria Daly where it started
    29,003 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
4 Sept 33.7 °C 22 % 33 km/h 0.0 mm Very high 43
5 Sept 33.0 °C 30 % 24 km/h 0.0 mm High 29
6 Sept 34.1 °C 26 % 23 km/h 0.0 mm High 30
7 Sept 34.8 °C 21 % 31 km/h 0.0 mm High 36
8 Sept 35.5 °C 17 % 39 km/h 0.0 mm Extreme 51
9 Sept 35.1 °C 5 % 46 km/h 0.0 mm Very extreme 85
10 Sept 32.1 °C 4 % 53 km/h 0.0 mm Very extreme 93
11 Sept 32.0 °C 9 % 53 km/h 0.0 mm Very extreme 92
12 Sept 32.4 °C 12 % 51 km/h 0.0 mm Very extreme 88
13 Sept 32.6 °C 16 % 48 km/h 0.0 mm Very extreme 78
14 Sept 33.3 °C 18 % 52 km/h 0.0 mm Very extreme 82
15 Sept 33.4 °C 17 % 51 km/h 0.0 mm Very extreme 86
16 Sept 33.9 °C 13 % 39 km/h 0.0 mm Extreme 66
17 Sept 34.2 °C 17 % 34 km/h 0.0 mm Extreme 53
18 Sept 35.1 °C 19 % 35 km/h 0.0 mm Extreme 51
19 Sept after 35.7 °C 14 % 38 km/h 0.0 mm Extreme 54
20 Sept after 34.1 °C 23 % 32 km/h 0.0 mm Very high 41
21 Sept after 32.3 °C 36 % 20 km/h 0.0 mm High 29
22 Sept after 34.5 °C 27 % 27 km/h 0.0 mm High 35
23 Sept after 36.4 °C 23 % 34 km/h 0.0 mm Very high 44
24 Sept after 34.3 °C 29 % 28 km/h 0.0 mm High 37
25 Sept after 35.1 °C 20 % 41 km/h 0.0 mm Very high 48
26 Sept after 35.5 °C 21 % 37 km/h 0.0 mm Very high 49
27 Sept after 35.7 °C 25 % 32 km/h 0.0 mm Very high 43
28 Sept after 35.3 °C 28 % 28 km/h 0.0 mm High 37

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 28 Aug 2019
After · 25 Sept 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,289Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Victoria Daly fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 4 September 2019 to 18 September 2019 (15 days). The perimeter dates it from 4 September 2019 to 17 September 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 29,081 hectares (290.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Victoria Daly (29,003 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 35.5 °C, humidity dropped to 4 % and gusts hit 53 km/h. The fire danger index (FWI) reached 93, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 17 September 2019 → 18 September 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 4 September 2019 to 17 September 2019. 1,289 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.