Skip to content
worldfires
AU · Australia · –

Victoria Daly fire, 22 May 2018 Victoria Daly

Out · last detection

The fire started on in Victoria Daly, Australia, and satellites saw it burning for 38 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 66,569 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
66,569ha
GWIS perimeter (Copernicus)
Duration
38days
22 May 2018 – 28 Jun 2018
Municipalities hit
1
local government areas
Started on
22 May
2018
Heat detections
2,411
in a single hotspot: 103 MW
Danger at start
62
Extreme · FWI index
Average daily power
343MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 22 May28 Jun
28 Jun 2018

How it evolved, day by day

23 May 2018 · 133 MW · 46 24 May 2018 · 136 MW · 43 25 May 2018 · 397 MW · 52 26 May 2018 · 62 MW · 13 27 May 2018 · 74 MW · 18 28 May 2018 · 85 MW · 21 29 May 2018 · 128 MW · 42 30 May 2018 · 96 MW · 25 31 May 2018 · 18 MW · 6 1 Jun 2018 · 6 MW · 1 2 Jun 2018 · 56 MW · 26 3 Jun 2018 · 698 MW · 73 4 Jun 2018 · 114 MW · 49 5 Jun 2018 · 429 MW · 108 6 Jun 2018 · 270 MW · 48 7 Jun 2018 · 266 MW · 53 8 Jun 2018 · 180 MW · 86 9 Jun 2018 · 638 MW · 75 10 Jun 2018 · 464 MW · 78 11 Jun 2018 · 513 MW · 56 12 Jun 2018 · 45 MW · 14 13 Jun 2018 · 74 MW · 12 14 Jun 2018 · 106 MW · 5 15 Jun 2018 · 45 MW · 24 16 Jun 2018 · 1,466 MW · 238 17 Jun 2018 · 2,545 MW · 412 18 Jun 2018 · 1,025 MW · 185 19 Jun 2018 · 360 MW · 103 20 Jun 2018 · 373 MW · 97 21 Jun 2018 · 435 MW · 92 22 Jun 2018 · 887 MW · 121 23 Jun 2018 · 180 MW · 56 24 Jun 2018 · 40 MW · 29 25 Jun 2018 · 130 MW · 37 26 Jun 2018 · 117 MW · 37 27 Jun 2018 · 66 MW · 24 28 Jun 2018 · 23 MW · 6
23 May 31 May 8 Jun 17 Jun 24 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
60km/h · peak gust
11%lowest humidity

It had gone 38 days without rain (1 mm or more) when it started.

This area had burned before

73% of the perimeter overlaps earlier fires recorded since 2016: 41,408 ha in 2016, 17,389 ha in 2017. Part of it burned more than once, so the yearly figures add up to more than the 48,320 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 42% of the area of London (666 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Victoria Daly where it started
    66,738 ha
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Strong wind: 39 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
22 May 29.1 °C 22 % 51 km/h 0.0 mm Extreme 62
23 May 30.2 °C 22 % 46 km/h 0.0 mm Extreme 59
24 May 30.9 °C 24 % 36 km/h 0.0 mm Very high 50
25 May 32.0 °C 24 % 42 km/h 0.0 mm Extreme 53
26 May 32.0 °C 29 % 38 km/h 0.0 mm Very high 50
27 May 31.8 °C 26 % 31 km/h 0.0 mm Very high 45
28 May 31.4 °C 32 % 36 km/h 0.0 mm Very high 43
29 May 32.0 °C 22 % 43 km/h 0.0 mm Extreme 52
30 May 30.3 °C 26 % 60 km/h 0.0 mm Very extreme 70
31 May 30.1 °C 25 % 49 km/h 0.0 mm Extreme 58
1 Jun 30.1 °C 25 % 43 km/h 0.0 mm Extreme 52
2 Jun 29.8 °C 30 % 40 km/h 0.0 mm Very high 48
3 Jun 29.3 °C 13 % 40 km/h 0.0 mm Extreme 64
4 Jun 28.2 °C 12 % 42 km/h 0.0 mm Extreme 69
5 Jun 27.6 °C 14 % 40 km/h 0.0 mm Extreme 64
6 Jun 28.5 °C 12 % 36 km/h 0.0 mm Extreme 60
7 Jun 29.2 °C 26 % 32 km/h 0.0 mm Very high 46
8 Jun 29.6 °C 35 % 32 km/h 0.0 mm High 38
9 Jun 30.3 °C 36 % 30 km/h 0.0 mm High 37
10 Jun 31.7 °C 24 % 33 km/h 0.0 mm Very high 48
11 Jun 31.3 °C 27 % 27 km/h 0.0 mm Very high 43
12 Jun 31.4 °C 38 % 32 km/h 0.0 mm High 35
13 Jun 31.0 °C 42 % 24 km/h 0.0 mm High 31
14 Jun 31.1 °C 37 % 16 km/h 0.0 mm High 27
15 Jun 30.2 °C 36 % 38 km/h 0.0 mm High 37
16 Jun 30.3 °C 31 % 49 km/h 0.0 mm Very high 49
17 Jun 28.7 °C 20 % 45 km/h 0.0 mm Extreme 59
18 Jun 28.4 °C 22 % 45 km/h 0.0 mm Extreme 56
19 Jun 30.2 °C 20 % 37 km/h 0.0 mm Extreme 51
20 Jun 30.9 °C 13 % 37 km/h 0.0 mm Extreme 65
21 Jun 29.7 °C 11 % 41 km/h 0.0 mm Extreme 67
22 Jun 28.6 °C 14 % 40 km/h 0.0 mm Extreme 66
23 Jun 28.9 °C 12 % 40 km/h 0.0 mm Extreme 67
24 Jun 29.1 °C 21 % 39 km/h 0.0 mm Extreme 60
25 Jun 29.6 °C 32 % 40 km/h 0.0 mm Extreme 50
26 Jun 30.2 °C 33 % 46 km/h 0.0 mm Extreme 55
27 Jun 29.5 °C 30 % 47 km/h 0.0 mm Extreme 56
28 Jun 29.2 °C 24 % 41 km/h 0.0 mm Extreme 52
29 Jun after 29.9 °C 32 % 37 km/h 0.0 mm Very high 49
30 Jun after 32.0 °C 31 % 42 km/h 0.0 mm Extreme 53
1 Jul after 31.6 °C 33 % 50 km/h 0.0 mm Extreme 59
2 Jul after 32.1 °C 26 % 53 km/h 0.0 mm Extreme 64
3 Jul after 31.7 °C 21 % 50 km/h 0.0 mm Extreme 60
4 Jul after 31.1 °C 22 % 46 km/h 0.0 mm Extreme 57
5 Jul after 31.0 °C 23 % 30 km/h 0.0 mm Very high 45
6 Jul after 31.4 °C 27 % 32 km/h 0.0 mm Very high 46
7 Jul after 30.5 °C 26 % 38 km/h 0.0 mm Extreme 55
8 Jul after 27.5 °C 18 % 42 km/h 0.0 mm Extreme 59

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 15 May 2018
After · 5 Jul 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 2,411Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Victoria Daly fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 22 May 2018 to 28 June 2018 (38 days). The perimeter dates it from 23 May 2018 to 28 June 2018.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 66,569 hectares (665.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Victoria Daly (66,738 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 32.0 °C, humidity dropped to 11 % and gusts hit 60 km/h. The fire danger index (FWI) reached 70, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 23 May 2018 → 22 May 2018.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 23 May 2018 to 28 June 2018. 2,411 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.