Skip to content
worldfires
AU · Australia · –

Victoria Daly fire, 14 July 2019 Victoria Daly, West Daly

Out · last detection

The fire started on in Victoria Daly, Australia, and satellites saw it burning for 44 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 250,494 hectares from heat detections, spread across 2 municipalities.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
250,494ha
GWIS perimeter (Copernicus)
Duration
44days
14 Jul 2019 – 26 Aug 2019
Municipalities hit
2
local government areas
Started on
14 Jul
2019
Heat detections
8,795
in a single hotspot: 391 MW
Danger at start
83
Very extreme · FWI index
Average daily power
1.7GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Jul26 Aug
26 Aug 2019

How it evolved, day by day

14 Jul 2019 · 176 MW · 37 15 Jul 2019 · 2,116 MW · 267 16 Jul 2019 · 2,042 MW · 328 17 Jul 2019 · 532 MW · 139 18 Jul 2019 · 905 MW · 177 19 Jul 2019 · 5,376 MW · 262 20 Jul 2019 · 4,250 MW · 321 21 Jul 2019 · 2,330 MW · 273 22 Jul 2019 · 5,933 MW · 286 23 Jul 2019 · 10,078 MW · 745 24 Jul 2019 · 5,949 MW · 695 25 Jul 2019 · 1,954 MW · 383 26 Jul 2019 · 2,563 MW · 343 27 Jul 2019 · 1,430 MW · 187 28 Jul 2019 · 1,307 MW · 134 29 Jul 2019 · 839 MW · 154 30 Jul 2019 · 1,165 MW · 158 31 Jul 2019 · 567 MW · 131 1 Aug 2019 · 1,241 MW · 275 2 Aug 2019 · 718 MW · 192 3 Aug 2019 · 884 MW · 206 4 Aug 2019 · 1,275 MW · 219 5 Aug 2019 · 860 MW · 181 6 Aug 2019 · 1,562 MW · 205 7 Aug 2019 · 412 MW · 69 8 Aug 2019 · 607 MW · 77 9 Aug 2019 · 146 MW · 33 10 Aug 2019 · 308 MW · 66 11 Aug 2019 · 555 MW · 131 12 Aug 2019 · 4,654 MW · 460 13 Aug 2019 · 2,761 MW · 496 14 Aug 2019 · 2,737 MW · 554 15 Aug 2019 · 1,475 MW · 187 16 Aug 2019 · 1,629 MW · 133 17 Aug 2019 · 451 MW · 94 18 Aug 2019 · 499 MW · 100 19 Aug 2019 · 164 MW · 46 20 Aug 2019 · 50 MW · 15 21 Aug 2019 · 27 MW · 7 22 Aug 2019 · 16 MW · 5 23 Aug 2019 · 0 MW · 1 24 Aug 2019 · 32 MW · 10 25 Aug 2019 · 43 MW · 12 26 Aug 2019 · 5 MW · 1
14 Jul 23 Jul 1 Aug 10 Aug 19 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
54km/h · peak gust
6%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

82% of the perimeter overlaps earlier fires recorded since 2016: 134,193 ha in 2016, 49,120 ha in 2017, 108,319 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 206,599 ha that had burned before.

How big is it?

20 km
It burned the equivalent of 1.6 times the area of London (2,505 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Victoria Daly where it started
    249,990 ha
    1.6 %
  2. 985 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area4.2 ha
Residents< 20

Inside the perimeter there were about 4.2 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Strong wind: 39 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Jul 28.0 °C 15 % 52 km/h 0.0 mm Very extreme 83
15 Jul 26.8 °C 11 % 51 km/h 0.0 mm Very extreme 78
16 Jul 28.8 °C 9 % 48 km/h 0.0 mm Very extreme 79
17 Jul 30.3 °C 9 % 44 km/h 0.0 mm Very extreme 74
18 Jul 31.4 °C 9 % 41 km/h 0.0 mm Very extreme 72
19 Jul 33.2 °C 12 % 41 km/h 0.0 mm Very extreme 70
20 Jul 34.9 °C 12 % 30 km/h 0.0 mm Extreme 57
21 Jul 33.7 °C 16 % 25 km/h 0.0 mm Very high 47
22 Jul 33.1 °C 17 % 19 km/h 0.0 mm High 37
23 Jul 33.8 °C 11 % 45 km/h 0.0 mm Extreme 56
24 Jul 32.8 °C 7 % 54 km/h 0.0 mm Very extreme 92
25 Jul 32.7 °C 18 % 34 km/h 0.0 mm Extreme 54
26 Jul 32.2 °C 22 % 37 km/h 0.0 mm Extreme 53
27 Jul 32.8 °C 25 % 34 km/h 0.0 mm Very high 47
28 Jul 33.6 °C 21 % 33 km/h 0.0 mm Very high 46
29 Jul 33.4 °C 23 % 30 km/h 0.0 mm Very high 42
30 Jul 34.1 °C 21 % 32 km/h 0.0 mm Very high 44
31 Jul 33.6 °C 18 % 42 km/h 0.0 mm Extreme 58
1 Aug 32.4 °C 13 % 49 km/h 0.0 mm Extreme 68
2 Aug 28.6 °C 10 % 48 km/h 0.0 mm Very extreme 80
3 Aug 30.1 °C 12 % 44 km/h 0.0 mm Very extreme 72
4 Aug 31.0 °C 23 % 50 km/h 0.0 mm Extreme 66
5 Aug 32.6 °C 21 % 36 km/h 0.0 mm Extreme 55
6 Aug 33.4 °C 22 % 33 km/h 0.0 mm Extreme 51
7 Aug 33.8 °C 22 % 23 km/h 0.0 mm High 37
8 Aug 34.2 °C 23 % 24 km/h 0.0 mm High 38
9 Aug 35.0 °C 20 % 27 km/h 0.0 mm Very high 46
10 Aug 34.1 °C 14 % 42 km/h 0.0 mm Extreme 61
11 Aug 32.6 °C 10 % 49 km/h 0.0 mm Very extreme 86
12 Aug 30.4 °C 6 % 46 km/h 0.0 mm Very extreme 82
13 Aug 29.1 °C 7 % 46 km/h 0.0 mm Very extreme 81
14 Aug 30.1 °C 6 % 41 km/h 0.0 mm Very extreme 73
15 Aug 32.5 °C 14 % 34 km/h 0.0 mm Extreme 60
16 Aug 34.0 °C 17 % 27 km/h 0.0 mm Extreme 53
17 Aug 35.0 °C 16 % 23 km/h 0.0 mm Very high 48
18 Aug 35.6 °C 10 % 37 km/h 0.0 mm Very extreme 76
19 Aug 36.1 °C 16 % 48 km/h 0.0 mm Very extreme 72
20 Aug 29.7 °C 12 % 53 km/h 0.0 mm Very extreme 87
21 Aug 29.6 °C 10 % 50 km/h 0.0 mm Very extreme 85
22 Aug 32.2 °C 10 % 42 km/h 0.0 mm Very extreme 76
23 Aug 33.4 °C 12 % 34 km/h 0.0 mm Extreme 64
24 Aug 34.7 °C 10 % 32 km/h 0.0 mm Extreme 61
25 Aug 34.4 °C 18 % 31 km/h 0.0 mm Extreme 52
26 Aug 33.7 °C 18 % 33 km/h 0.0 mm Extreme 53
27 Aug after 33.9 °C 9 % 44 km/h 0.0 mm Very extreme 74
28 Aug after 35.0 °C 6 % 53 km/h 0.0 mm Very extreme 94
29 Aug after 30.9 °C 3 % 48 km/h 0.0 mm Very extreme 88
30 Aug after 31.9 °C 2 % 44 km/h 0.0 mm Very extreme 84
31 Aug after 33.4 °C 5 % 35 km/h 0.0 mm Very extreme 76
1 Sept after 34.3 °C 10 % 35 km/h 0.0 mm Extreme 67
2 Sept after 34.8 °C 13 % 31 km/h 0.0 mm Extreme 59
3 Sept after 35.1 °C 16 % 30 km/h 0.0 mm Very high 50
4 Sept after 35.4 °C 21 % 33 km/h 0.0 mm Very high 44
5 Sept after 34.3 °C 28 % 30 km/h 0.0 mm Very high 39

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Jul 2019
After · 2 Sept 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 8,795Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Victoria Daly fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 14 July 2019 to 26 August 2019 (44 days). The perimeter dates it from 14 July 2019 to 19 August 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 250,494 hectares (2,504.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Victoria Daly (249,990 ha, 1.6 %); West Daly (985 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 36.1 °C, humidity dropped to 6 % and gusts hit 54 km/h. The fire danger index (FWI) reached 92, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 19 August 2019 → 26 August 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 14 July 2019 to 19 August 2019. 8,795 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.