Skip to content
worldfires
AU · Australia · –

Victoria Daly fire, 23 May 2018 West Daly, Victoria Daly

Out · last detection

The fire started on in Victoria Daly, Australia, and satellites saw it burning for 21 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,624 hectares from heat detections, spread across 2 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
8,624ha
GWIS perimeter (Copernicus)
Duration
21days
23 May 2018 – 12 Jun 2018
Municipalities hit
2
local government areas
Started on
23 May
2018
Heat detections
516
in a single hotspot: 182 MW
Danger at start
58
Extreme · FWI index
Average daily power
401MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 23 May12 Jun
12 Jun 2018

How it evolved, day by day

23 May 2018 · 148 MW · 51 24 May 2018 · 754 MW · 51 25 May 2018 · 788 MW · 54 26 May 2018 · 1,641 MW · 38 27 May 2018 · 27 MW · 3 28 May 2018 · 66 MW · 10 29 May 2018 · 209 MW · 12 30 May 2018 · 303 MW · 35 31 May 2018 · 78 MW · 11 1 Jun 2018 · 199 MW · 11 2 Jun 2018 · 3 MW · 2 3 Jun 2018 · 21 MW · 6 4 Jun 2018 · 34 MW · 7 5 Jun 2018 · 17 MW · 7 6 Jun 2018 · 420 MW · 45 7 Jun 2018 · 1,501 MW · 65 8 Jun 2018 · 1,101 MW · 42 9 Jun 2018 · 838 MW · 37 10 Jun 2018 · 223 MW · 19 11 Jun 2018 · 30 MW · 7 12 Jun 2018 · 19 MW · 3
26 May 2 Jun 7 Jun 12 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
58km/h · peak gust
12%lowest humidity

It had gone 41 days without rain (1 mm or more) when it started.

This area had burned before

72% of the perimeter overlaps earlier fires recorded since 2016: 5,347 ha in 2016, 2,144 ha in 2017. Part of it burned more than once, so the yearly figures add up to more than the 6,171 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 5.4% of the area of London (86 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 8,214 ha
    0.6 %
  2. Victoria Daly where it started
    464 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
23 May 30.7 °C 22 % 46 km/h 0.0 mm Extreme 58
24 May 31.3 °C 23 % 35 km/h 0.0 mm Very high 49
25 May 32.3 °C 24 % 41 km/h 0.0 mm Extreme 52
26 May 32.3 °C 29 % 37 km/h 0.0 mm Very high 48
27 May 32.0 °C 27 % 31 km/h 0.0 mm Very high 41
28 May 31.6 °C 33 % 33 km/h 0.0 mm Very high 42
29 May 32.4 °C 21 % 39 km/h 0.0 mm Very high 50
30 May 30.8 °C 25 % 58 km/h 0.0 mm Extreme 68
31 May 30.6 °C 25 % 48 km/h 0.0 mm Extreme 57
1 Jun 30.5 °C 25 % 42 km/h 0.0 mm Extreme 51
2 Jun 30.3 °C 30 % 38 km/h 0.0 mm Very high 48
3 Jun 29.8 °C 13 % 40 km/h 0.0 mm Extreme 65
4 Jun 28.8 °C 12 % 42 km/h 0.0 mm Extreme 69
5 Jun 28.3 °C 14 % 40 km/h 0.0 mm Extreme 63
6 Jun 29.0 °C 12 % 37 km/h 0.0 mm Extreme 61
7 Jun 29.5 °C 27 % 33 km/h 0.0 mm Very high 46
8 Jun 29.8 °C 35 % 35 km/h 0.0 mm Very high 38
9 Jun 30.6 °C 35 % 31 km/h 0.0 mm High 37
10 Jun 31.9 °C 25 % 32 km/h 0.0 mm Very high 46
11 Jun 31.6 °C 28 % 28 km/h 0.0 mm Very high 42
12 Jun 31.8 °C 37 % 33 km/h 0.0 mm High 37
13 Jun after 31.1 °C 42 % 24 km/h 0.0 mm High 30
14 Jun after 31.1 °C 39 % 18 km/h 0.0 mm High 27
15 Jun after 30.5 °C 38 % 35 km/h 0.0 mm Very high 38
16 Jun after 30.8 °C 31 % 48 km/h 0.0 mm Very high 50
17 Jun after 29.3 °C 20 % 45 km/h 0.0 mm Extreme 60
18 Jun after 28.9 °C 21 % 45 km/h 0.0 mm Extreme 56
19 Jun after 30.7 °C 20 % 38 km/h 0.0 mm Extreme 50
20 Jun after 31.2 °C 13 % 37 km/h 0.0 mm Extreme 65
21 Jun after 30.2 °C 11 % 41 km/h 0.0 mm Extreme 67
22 Jun after 29.2 °C 14 % 41 km/h 0.0 mm Extreme 66

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 16 May 2018
After · 19 Jun 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 516Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Victoria Daly fire last?
GWIS (Copernicus) dates it between 23 May 2018 and 12 June 2018: 21 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,624 hectares (86.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: West Daly (8,214 ha, 0.6 %); Victoria Daly (464 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 32.4 °C, humidity dropped to 12 % and gusts hit 58 km/h. The fire danger index (FWI) reached 69, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 516 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.