Skip to content
worldfires
BR · Brazil · →

Uruçuí fire, 15 September 2026 Uruçuí

Out · last detection 21 Sept 2026, 16:37 UTC

The fire started on 15 September 2026 in Uruçuí, Brazil, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,579 hectares from heat detections, spread across a single municipality.

It is the 417th largest in Piaui since 2016 (of 804 with a page). Number 399 in Brazil in 2026, of 751.

Compare with…
Burnt area
4,579ha
GWIS perimeter (Copernicus)
Duration
8days
15 Sept 2026 – 22 Sept 2026
Municipalities hit
1
municipalities
Started on
15 Sept
2026
Heat detections
112
in a single hotspot: 131 MW
Danger at start
50
Extreme · FWI index
Average daily power
292MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Sept22 Sept
21 Sept 2026

How it evolved, day by day

16 Sept 2026 · 1,427 MW · 48 17 Sept 2026 · 78 MW · 25 18 Sept 2026 · 14 MW · 11 19 Sept 2026 · 19 MW · 5 20 Sept 2026 · 116 MW · 11 21 Sept 2026 · 95 MW · 12
16 Sept 17 Sept 18 Sept 19 Sept 20 Sept 21 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
55km/h · peak gust
17%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

73% of the perimeter overlaps earlier fires recorded since 2016: 1,200 ha in 2018, 512 ha in 2019, 1,288 ha in 2020, 1,731 ha in 2021, 3,010 ha in 2024, 289 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 3,343 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.9% of the area of London (46 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Uruçuí 25,203 inhabitants where it started
    4,604 ha reached on 16 Sept
    0.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Sept 36.7 °C 22 % 36 km/h 0.0 mm Extreme 50
16 Sept 37.8 °C 18 % 32 km/h 0.0 mm Very high 48
17 Sept 36.2 °C 24 % 49 km/h 0.0 mm Extreme 59
18 Sept 35.5 °C 27 % 55 km/h 0.0 mm Extreme 60
19 Sept 36.4 °C 17 % 51 km/h 0.0 mm Extreme 60
20 Sept 34.7 °C 28 % 46 km/h 0.0 mm Extreme 53
21 Sept 37.2 °C 23 % 42 km/h 0.0 mm Extreme 50
22 Sept 37.6 °C 21 % 36 km/h 0.0 mm Very high 48
23 Sept after 36.9 °C 27 % 27 km/h 0.0 mm Very high 43
24 Sept after 36.5 °C 33 % 33 km/h 0.0 mm Very high 42
25 Sept after 34.5 °C 39 % 28 km/h 0.0 mm High 35
26 Sept after 36.0 °C 30 % 41 km/h 0.2 mm Very high 42
27 Sept after 37.8 °C 22 % 48 km/h 0.0 mm Extreme 53
28 Sept after 36.1 °C 26 % 38 km/h 0.0 mm Very high 49
29 Sept after 36.6 °C 29 % 26 km/h 0.0 mm Very high 40
30 Sept after 37.7 °C 24 % 29 km/h 0.0 mm Very high 44
1 Oct after 36.2 °C 35 % 35 km/h 0.1 mm Very high 40
2 Oct after 34.3 °C 42 % 34 km/h 0.0 mm High 37

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Sept 2026
After · 29 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 24 September 2026 the air beside the fire reached 49 µg/m³ of PM2.5. That day averaged 29: 1.9 times the WHO daily guideline (15).

PM2.5 peak49 µg/m³
Days over the guideline5 days
PM1050 µg/m³
Optical depth0.46
13141516171819202122232425
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 112Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil ›

Frequently asked questions

How long did the Uruçuí fire last?
GWIS (Copernicus) dates it between 15 September 2026 and 22 September 2026: 8 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,579 hectares (45.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Uruçuí (4,604 ha, 0.5 %).
What was the weather like?
During the fire the temperature reached 37.8 °C, humidity dropped to 17 % and gusts hit 55 km/h. The fire danger index (FWI) reached 60, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings ›

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 112 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.