Skip to content
worldfires
AU · Australia · –

Unincorporated NT fire, 14 August 2026 Unincorporated NT

Out · last detection 2 Sept 2026, 05:42 UTC

The fire started on 14 August 2026 in Unincorporated NT, Australia, and satellites saw it burning for 20 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,269 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
6,269ha
GWIS perimeter (Copernicus)
Duration
20days
14 Aug 2026 – 2 Sept 2026
Municipalities hit
1
local government areas
Started on
14 Aug
2026
Heat detections
179
in a single hotspot: 107 MW
Danger at start
45
Very high · FWI index
Average daily power
92MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Aug2 Sept
2 Sept 2026

How it evolved, day by day

14 Aug 2026 · 9 MW · 2 15 Aug 2026 · 217 MW · 6 16 Aug 2026 · 59 MW · 15 17 Aug 2026 · 68 MW · 8 18 Aug 2026 · 144 MW · 15 19 Aug 2026 · 74 MW · 13 20 Aug 2026 · 28 MW · 4 21 Aug 2026 · 71 MW · 8 22 Aug 2026 · 32 MW · 6 23 Aug 2026 · 70 MW · 9 24 Aug 2026 · 41 MW · 2 25 Aug 2026 · 127 MW · 13 26 Aug 2026 · 172 MW · 11 27 Aug 2026 · 28 MW · 3 28 Aug 2026 · 23 MW · 7 29 Aug 2026 · 69 MW · 7 30 Aug 2026 · 91 MW · 7 31 Aug 2026 · 316 MW · 14 1 Sept 2026 · 170 MW · 25 2 Sept 2026 · 31 MW · 4
14 Aug 18 Aug 22 Aug 26 Aug 31 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
44km/h · peak gust
19%lowest humidity

It had gone 44 days without rain (1 mm or more) when it started.

This area had burned before

100% of the perimeter overlaps earlier fires recorded since 2016: 3,977 ha in 2016, 2,437 ha in 2017, 4,619 ha in 2018, 4,312 ha in 2019, 5,073 ha in 2020, 471 ha in 2021, 4,907 ha in 2022, 6,128 ha in 2023, 370 ha in 2024, 4,886 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 6,307 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 4% of the area of London (63 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Unincorporated NT where it started
    6,124 ha
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Aug 35.0 °C 26 % 35 km/h 0.0 mm Very high 45
15 Aug 34.0 °C 28 % 30 km/h 0.0 mm Very high 42
16 Aug 33.5 °C 31 % 28 km/h 0.4 mm Very high 39
17 Aug 33.7 °C 27 % 33 km/h 0.0 mm Very high 40
18 Aug 33.8 °C 27 % 38 km/h 0.0 mm Very high 46
19 Aug 33.6 °C 24 % 44 km/h 0.0 mm Extreme 56
20 Aug 33.8 °C 19 % 39 km/h 0.0 mm Extreme 54
21 Aug 34.0 °C 25 % 35 km/h 0.0 mm Very high 50
22 Aug 33.9 °C 26 % 35 km/h 0.0 mm Very high 45
23 Aug 33.4 °C 28 % 32 km/h 0.0 mm Very high 42
24 Aug 33.2 °C 35 % 22 km/h 0.0 mm High 35
25 Aug 34.0 °C 35 % 28 km/h 0.0 mm High 31
26 Aug 34.7 °C 27 % 44 km/h 0.0 mm Extreme 53
27 Aug 34.9 °C 25 % 41 km/h 0.0 mm Extreme 52
28 Aug 34.8 °C 24 % 32 km/h 0.0 mm Very high 49
29 Aug 35.4 °C 19 % 38 km/h 0.0 mm Extreme 54
30 Aug 34.4 °C 27 % 38 km/h 0.0 mm Extreme 51
31 Aug 34.2 °C 22 % 40 km/h 0.0 mm Extreme 53
1 Sept 33.3 °C 26 % 37 km/h 0.0 mm Very high 49
2 Sept 32.9 °C 30 % 29 km/h 0.0 mm Very high 43
3 Sept after 34.3 °C 32 % 25 km/h 0.5 mm High 38
4 Sept after 34.7 °C 36 % 27 km/h 0.0 mm High 34
5 Sept after 34.4 °C 38 % 21 km/h 0.2 mm High 32
6 Sept after 35.2 °C 37 % 20 km/h 0.5 mm High 32
7 Sept after 35.9 °C 31 % 24 km/h 0.4 mm High 31
8 Sept after 36.3 °C 27 % 34 km/h 0.0 mm High 35
9 Sept after 35.3 °C 30 % 25 km/h 0.0 mm High 37
10 Sept after 35.9 °C 29 % 38 km/h 0.0 mm Very high 45
11 Sept after 36.0 °C 27 % 37 km/h 0.0 mm Very high 43
12 Sept after 35.7 °C 26 % 38 km/h 0.0 mm Very high 50

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Aug 2026
After · 9 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 14 August 2026 the air beside the fire reached 39 µg/m³ of PM2.5. That day averaged 19: 1.3 times the WHO daily guideline (15).

PM2.5 peak39 µg/m³
Days over the guideline5 days
PM1041 µg/m³
Optical depth0.42
5 Aug12 Aug19 Aug26 Aug2 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 179Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Unincorporated NT fire last?
GWIS (Copernicus) dates it between 14 August 2026 and 2 September 2026: 20 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,269 hectares (62.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Unincorporated NT (6,124 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 35.4 °C, humidity dropped to 19 % and gusts hit 44 km/h. The fire danger index (FWI) reached 56, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 179 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.