Skip to content
worldfires
AU · Australia · –

Unincorporated NT fire, 17 August 2019 Unincorporated NT

Out · last detection 1 Sept 2019, 04:52 UTC

The fire started on 17 August 2019 in Unincorporated NT, Australia, and satellites saw it burning for 15 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,965 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
5,965ha
GWIS perimeter (Copernicus)
Duration
15days
17 Aug 2019 – 31 Aug 2019
Municipalities hit
1
local government areas
Started on
17 Aug
2019
Heat detections
256
in a single hotspot: 44 MW
Danger at start
30
High · FWI index
Average daily power
125MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 17 Aug31 Aug
1 Sept 2019

How it evolved, day by day

17 Aug 2019 · 19 MW · 9 18 Aug 2019 · 35 MW · 5 20 Aug 2019 · 21 MW · 9 21 Aug 2019 · 318 MW · 47 22 Aug 2019 · 423 MW · 86 23 Aug 2019 · 311 MW · 41 24 Aug 2019 · 89 MW · 9 25 Aug 2019 · 107 MW · 9 28 Aug 2019 · 236 MW · 26 29 Aug 2019 · 13 MW · 3 30 Aug 2019 · 31 MW · 9 31 Aug 2019 · 19 MW · 2 1 Sept 2019 · 4 MW · 1
17 Aug 22 Aug 29 Aug 1 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
50km/h · peak gust
8%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

88% of the perimeter overlaps earlier fires recorded since 2016: 2,523 ha in 2016, 1,519 ha in 2017, 4,409 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 5,239 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.8% of the area of London (60 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Unincorporated NT where it started
    5,837 ha
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area2.2 ha
Residents≈ 20

Inside the perimeter there were about 2.2 hectares of built-up land and about 20 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
17 Aug 32.1 °C 37 % 26 km/h 0.0 mm High 30
18 Aug 33.9 °C 35 % 25 km/h 0.0 mm High 32
19 Aug 33.3 °C 40 % 33 km/h 0.1 mm High 33
20 Aug 32.4 °C 16 % 50 km/h 0.1 mm Very extreme 71
21 Aug 31.1 °C 13 % 44 km/h 0.0 mm Extreme 66
22 Aug 32.4 °C 22 % 42 km/h 0.0 mm Extreme 64
23 Aug 32.7 °C 20 % 28 km/h 0.0 mm Very high 46
24 Aug 33.0 °C 28 % 25 km/h 0.0 mm High 38
25 Aug 32.9 °C 25 % 30 km/h 0.0 mm High 36
26 Aug 32.8 °C 25 % 34 km/h 0.0 mm Very high 41
27 Aug 33.5 °C 17 % 42 km/h 0.0 mm Extreme 57
28 Aug 34.3 °C 10 % 45 km/h 0.0 mm Very extreme 74
29 Aug 31.4 °C 8 % 46 km/h 0.0 mm Very extreme 72
30 Aug 31.5 °C 8 % 40 km/h 0.0 mm Extreme 67
31 Aug 32.7 °C 15 % 30 km/h 0.0 mm Extreme 53
1 Sept after 33.3 °C 17 % 37 km/h 0.0 mm Extreme 56
2 Sept after 33.2 °C 19 % 38 km/h 0.0 mm Extreme 56
3 Sept after 33.3 °C 20 % 35 km/h 0.0 mm Very high 47
4 Sept after 33.7 °C 22 % 37 km/h 0.0 mm Extreme 51
5 Sept after 33.5 °C 31 % 29 km/h 0.0 mm High 33
6 Sept after 34.1 °C 30 % 28 km/h 0.0 mm High 33
7 Sept after 35.3 °C 21 % 37 km/h 0.0 mm High 38
8 Sept after 35.8 °C 18 % 42 km/h 0.0 mm Extreme 57
9 Sept after 35.7 °C 8 % 41 km/h 0.0 mm Very extreme 74
10 Sept after 33.1 °C 7 % 52 km/h 0.0 mm Very extreme 86

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 10 Aug 2019
After · 7 Sept 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 256Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Unincorporated NT fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 17 August 2019 to 31 August 2019 (15 days). The perimeter dates it from 17 August 2019 to 24 August 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,965 hectares (59.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Unincorporated NT (5,837 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 34.3 °C, humidity dropped to 8 % and gusts hit 50 km/h. The fire danger index (FWI) reached 74, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 24 August 2019 → 31 August 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 17 August 2019 to 24 August 2019. 256 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.