Skip to content
worldfires
BR · Brazil · –

União do Sul fire, 14 September 2019 União do Sul

Out · last detection 26 Sept 2019, 17:15 UTC

The fire started on 14 September 2019 in União do Sul, Brazil, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,866 hectares from heat detections, spread across a single municipality.

It is the 515th largest in Mato Grosso since 2016 (of 1872 with a page). Number 202 in Brazil in 2019, of 973.

Burnt area
8,866ha
GWIS perimeter (Copernicus)
Duration
13days
14 Sept 2019 – 26 Sept 2019
Municipalities hit
1
municipalities
Started on
14 Sept
2019
Heat detections
835
in a single hotspot: 432 MW
Danger at start
41
Very high · FWI index
Average daily power
1.1GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Sept26 Sept
26 Sept 2019

How it evolved, day by day

14 Sept 2019 · 275 MW · 7 15 Sept 2019 · 497 MW · 21 16 Sept 2019 · 2,663 MW · 52 17 Sept 2019 · 7,309 MW · 126 18 Sept 2019 · 293 MW · 82 19 Sept 2019 · 737 MW · 61 20 Sept 2019 · 784 MW · 121 21 Sept 2019 · 647 MW · 133 22 Sept 2019 · 777 MW · 91 23 Sept 2019 · 136 MW · 38 24 Sept 2019 · 444 MW · 36 25 Sept 2019 · 70 MW · 50 26 Sept 2019 · 45 MW · 17
14 Sept 17 Sept 20 Sept 23 Sept 26 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
33km/h · peak gust
22%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 2.0 mm on 28 Sept.

This area had burned before

77% of the perimeter overlaps earlier fires recorded since 2016: 2,164 ha in 2016, 5,321 ha in 2017. Part of it burned more than once, so the yearly figures add up to more than the 6,859 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 5.6% of the area of London (89 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. União do Sul 3,838 inhabitants where it started
    8,914 ha reached on 14 Sept
    1.9 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Sept 38.1 °C 22 % 21 km/h 0.0 mm Very high 41
15 Sept 37.2 °C 25 % 21 km/h 0.0 mm Very high 42
16 Sept 37.5 °C 26 % 27 km/h 0.0 mm Very high 50
17 Sept 37.3 °C 23 % 27 km/h 0.0 mm Very high 48
18 Sept 35.6 °C 30 % 31 km/h 0.0 mm Very high 44
19 Sept 36.4 °C 33 % 33 km/h 0.0 mm Very high 47
20 Sept 38.1 °C 29 % 26 km/h 0.0 mm Very high 40
21 Sept 37.1 °C 35 % 20 km/h 0.0 mm Very high 39
22 Sept 37.5 °C 33 % 23 km/h 0.0 mm Very high 38
23 Sept 37.4 °C 33 % 27 km/h 0.0 mm Very high 39
24 Sept 36.9 °C 30 % 27 km/h 0.0 mm Very high 44
25 Sept 36.7 °C 33 % 24 km/h 0.0 mm Very high 41
26 Sept 32.4 °C 46 % 27 km/h 1.7 mm High 22
27 Sept after 33.9 °C 36 % 24 km/h 0.4 mm High 24
28 Sept after 33.0 °C 43 % 23 km/h 2.0 mm High 28

Its twins: fires that started in the same weather

It started with an FWI of 41.0, a minimum humidity of 22% and more than two months without rain. Fires in the area that started in weather like this since 2016: 32.

FWI at the start 41.0
Minimum humidity 22 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

União do Sul fire, August 2020
8,078 ha 23 days FWI 42.0 Min. humidity 23 % 11 km away, in 2020

First rain (1 mm or more) after it ended: 1.6 mm on 20 Sept.

What happened to them

19 days
median duration
6,948 ha
median area
28 %
went past 10,000 ha
3.8 mm
rain at the end (median; 21 of 32 had it)

It burned an area similar to its twins (8,866 ha against a median of 6,948 ha) and lasted 13 days, against 19 days.

In 11 of 32, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.0 mmfirst rain
28 Sept2 days after it ended
33km/h · max. gust

It was considered over on 26 Sept, and on 28 Sept 2.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 21 of 32, with a median of 3.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Sept 2019
After · 3 Oct 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 835Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the União do Sul fire last?
GWIS (Copernicus) dates it between 14 September 2019 and 26 September 2019: 13 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,866 hectares (88.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered União do Sul (8,914 ha, 1.9 %).
What was the weather like?
During the fire the temperature reached 38.1 °C, humidity dropped to 22 % and gusts hit 33 km/h. The fire danger index (FWI) reached 50, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 32. Their median duration was 19 days and their median area 6,948 ha; 28 % went past 10,000 ha. In 11 of 32, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 835 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.