Skip to content
worldfires
RS · Serbia · –

Trgoviste Municipality fire, 24 October 2019 Трговиште · Trgoviste Municipality, Bosilegrad Municipality

Out · last detection 30 Oct 2019, 00:24 UTC

The fire started on 24 October 2019 in Trgoviste Municipality, Serbia, and satellites saw it burning for 7 days. Copernicus mapped a burnt perimeter of 502 hectares from satellite imagery, spread across 2 municipalities.

It is the 10th largest in Pčinjski upravni okrug since 2016 (of 80 with a page). Number 7 in Serbia in 2019, of 38.

Burnt area
502ha
Copernicus perimeter
Duration
7days
24 Oct 2019 – 30 Oct 2019
Municipalities hit
2
municipalities
Started on
24 Oct
2019
Heat detections
62
in a single hotspot: 36 MW
Danger at start
18
Moderate · FWI index
Average daily power
57MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 24 Oct30 Oct
30 Oct 2019

How it evolved, day by day

24 Oct 2019 · 4 MW · 1 25 Oct 2019 · 33 MW · 6 26 Oct 2019 · 71 MW · 8 27 Oct 2019 · 120 MW · 12 28 Oct 2019 · 121 MW · 18 29 Oct 2019 · 41 MW · 10 30 Oct 2019 · 10 MW · 7
24 Oct 26 Oct 28 Oct 30 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

20°high
24km/h · peak gust
24%lowest humidity

It had gone 18 days without rain (1 mm or more) when it started. Rain came after the fire: 2.7 mm on 31 Oct.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.3% of the area of London (5 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Trgoviste Municipality Трговиште 4,316 inhabitants · 16.3 km from the centre where it started
    493 ha reached on 24 Oct
    1.3 %
  2. Bosilegrad Municipality Босилеград 6,065 inhabitants · 22.3 km from the centre
    10 ha
    0.0 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Broadleaved forest56 %
  • Scrub and transitional woodland17 %
  • Other natural land16 %
  • Coniferous forest7.9 %
  • Agricultural areas3.7 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
24 Oct 20.5 °C 30 % 19 km/h 0.0 mm Moderate 18
25 Oct 19.6 °C 24 % 17 km/h 0.0 mm Moderate 17
26 Oct 19.3 °C 29 % 17 km/h 0.0 mm Moderate 19
27 Oct 18.2 °C 28 % 20 km/h 0.0 mm Moderate 20
28 Oct 17.4 °C 28 % 23 km/h 0.0 mm Moderate 21
29 Oct 16.9 °C 31 % 24 km/h 0.0 mm Moderate 21
30 Oct 12.5 °C 56 % 19 km/h 1.0 mm Moderate 14
31 Oct after 5.5 °C 88 % 24 km/h 2.7 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 18.0, a minimum humidity of 30% and 18 days without rain. Fires in the area that started in weather like this since 2016: 35.

FWI at the start 18.0
Minimum humidity 30 %
Days without rain 18
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Vranje City fire, March 2019
147 ha 3 days FWI 15.4 Min. humidity 30 % 8 km away, in 2019

First rain (1 mm or more) after it ended: 3.1 mm on 3 Apr.

What happened to them

2 days
median duration
165 ha
median area
11 %
went past 1,000 ha
4.3 mm
rain at the end (median; 30 of 35 had it)

It was 3.0 times larger than the median of its twins and lasted 7 days, against 2 days.

Only 7 of its 35 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 5 of 35, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.7 mmfirst rain
31 Octthe day after it ended
24km/h · max. gust

It was considered over on 30 Oct, and on 31 Oct 2.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 30 of 35, with a median of 4.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 17 Oct 2019
After · 6 Nov 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 30 October 2019 the air beside the fire reached 48 µg/m³ of PM2.5. That day averaged 36: 2.4 times the WHO daily guideline (15).

PM2.5 peak48 µg/m³
Days over the guideline4 days
PM1061 µg/m³
22 Oct25 Oct28 Oct31 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 62Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Serbia

Frequently asked questions

How long did the Trgoviste Municipality fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 24 October 2019 to 30 October 2019 (7 days). The perimeter dates it from 24 October 2019 to 27 October 2019.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 502 hectares (5.0 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Trgoviste Municipality (493 ha, 1.3 %); Bosilegrad Municipality (10 ha, 0.0 %).
Did the fire reach a town?
The fire started in Trgoviste Municipality and came within 16.3 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 20.5 °C, humidity dropped to 24 % and gusts hit 24 km/h. The fire danger index (FWI) reached 21, class Moderate.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Serbia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 35. Their median duration was 2 days and their median area 165 ha; 11 % went past 1,000 ha. Only 7 of its 35 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 5 of 35, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193 · 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 24 October 2019 to 27 October 2019. 62 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.