Skip to content
worldfires
AU · Australia · –

Tiwi Islands fire, 19 June 2019 Tiwi Islands

Out · last detection

The fire started on in Tiwi Islands, Australia, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 7,831 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

The power measured by the satellite is low (23.5 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
7,831ha
GWIS perimeter (Copernicus)
Duration
10days
19 Jun 2019 – 28 Jun 2019
Municipalities hit
1
local government areas
Started on
19 Jun
2019
Heat detections
371
in a single hotspot: 24 MW
Danger at start
30
High · FWI index
Average daily power
219MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 19 Jun28 Jun
28 Jun 2019

How it evolved, day by day

19 Jun 2019 · 2 MW · 1 20 Jun 2019 · 33 MW · 24 21 Jun 2019 · 514 MW · 87 22 Jun 2019 · 273 MW · 56 23 Jun 2019 · 548 MW · 81 24 Jun 2019 · 387 MW · 68 25 Jun 2019 · 89 MW · 16 26 Jun 2019 · 141 MW · 21 27 Jun 2019 · 193 MW · 16 28 Jun 2019 · 9 MW · 1
19 Jun 21 Jun 23 Jun 25 Jun 27 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

28°high
36km/h · peak gust
29%lowest humidity

It had gone 40 days without rain (1 mm or more) when it started.

This area had burned before

92% of the perimeter overlaps earlier fires recorded since 2016: 6,034 ha in 2016, 6,431 ha in 2017, 3,119 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 7,226 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 4.9% of the area of London (78 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Tiwi Islands where it started
    7,885 ha
    1.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
19 Jun 28.0 °C 34 % 35 km/h 0.0 mm High 30
20 Jun 27.9 °C 39 % 36 km/h 0.0 mm High 33
21 Jun 27.7 °C 41 % 35 km/h 0.0 mm High 32
22 Jun 27.5 °C 43 % 35 km/h 0.0 mm High 32
23 Jun 27.4 °C 41 % 35 km/h 0.0 mm High 31
24 Jun 27.2 °C 29 % 35 km/h 0.0 mm High 33
25 Jun 27.0 °C 30 % 33 km/h 0.0 mm High 36
26 Jun 26.9 °C 29 % 29 km/h 0.0 mm High 35
27 Jun 27.4 °C 38 % 26 km/h 0.0 mm High 30
28 Jun 27.2 °C 51 % 20 km/h 0.0 mm High 22
29 Jun after 27.7 °C 53 % 19 km/h 0.0 mm High 26
30 Jun after 29.0 °C 53 % 28 km/h 0.0 mm High 26
1 Jul after 28.7 °C 50 % 27 km/h 0.0 mm High 28
2 Jul after 28.4 °C 39 % 28 km/h 0.0 mm High 27
3 Jul after 27.9 °C 40 % 25 km/h 0.0 mm High 25
4 Jul after 27.7 °C 41 % 22 km/h 0.0 mm High 24
5 Jul after 27.2 °C 43 % 16 km/h 0.0 mm Moderate 20
6 Jul after 26.8 °C 49 % 17 km/h 0.0 mm High 23
7 Jul after 27.9 °C 39 % 28 km/h 0.0 mm High 28
8 Jul after 28.3 °C 40 % 23 km/h 0.0 mm High 29

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 12 Jun 2019
After · 5 Jul 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 371Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Tiwi Islands fire last?
GWIS (Copernicus) dates it between 19 June 2019 and 28 June 2019: 10 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 7,831 hectares (78.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Tiwi Islands (7,885 ha, 1.0 %).
What was the weather like?
During the fire the temperature reached 28.0 °C, humidity dropped to 29 % and gusts hit 36 km/h. The fire danger index (FWI) reached 36, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 371 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.