Skip to content
worldfires
AU · Australia · –

Tiwi Islands fire, 23 July 2017 Tiwi Islands

Out · last detection 6 Aug 2017, 17:14 UTC

The fire started on 23 July 2017 in Tiwi Islands, Australia, and satellites saw it burning for 15 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 9,597 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
9,597ha
GWIS perimeter (Copernicus)
Duration
15days
23 Jul 2017 – 6 Aug 2017
Municipalities hit
1
local government areas
Started on
23 Jul
2017
Heat detections
531
in a single hotspot: 127 MW
Danger at start
42
Very high · FWI index
Average daily power
567MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 23 Jul6 Aug
6 Aug 2017

How it evolved, day by day

23 Jul 2017 · 14 MW · 4 24 Jul 2017 · 186 MW · 10 25 Jul 2017 · 179 MW · 22 26 Jul 2017 · 1,748 MW · 69 27 Jul 2017 · 640 MW · 128 28 Jul 2017 · 3,656 MW · 164 29 Jul 2017 · 1,160 MW · 65 30 Jul 2017 · 58 MW · 15 31 Jul 2017 · 495 MW · 21 1 Aug 2017 · 147 MW · 9 2 Aug 2017 · 28 MW · 3 3 Aug 2017 · 174 MW · 12 4 Aug 2017 · 19 MW · 7 5 Aug 2017 · 0 MW · 1 6 Aug 2017 · 1 MW · 1
23 Jul 28 Jul 1 Aug 4 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
48km/h · peak gust
28%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

21% of the perimeter overlaps earlier fires recorded since 2016: 2,688 ha in 2016. Part of it burned more than once, so the yearly figures add up to more than the 2,051 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 6.1% of the area of London (96 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Tiwi Islands where it started
    9,651 ha
    1.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
23 Jul 32.6 °C 28 % 37 km/h 0.0 mm Very high 42
24 Jul 32.0 °C 35 % 44 km/h 0.0 mm Very high 48
25 Jul 31.6 °C 43 % 48 km/h 0.0 mm Very high 47
26 Jul 31.6 °C 40 % 45 km/h 0.0 mm Very high 44
27 Jul 31.3 °C 30 % 42 km/h 0.0 mm Very high 46
28 Jul 30.6 °C 36 % 41 km/h 0.0 mm Very high 40
29 Jul 29.7 °C 47 % 38 km/h 0.0 mm High 37
30 Jul 29.1 °C 54 % 33 km/h 0.3 mm High 29
31 Jul 30.9 °C 46 % 34 km/h 0.0 mm High 30
1 Aug 30.8 °C 38 % 37 km/h 0.2 mm High 28
2 Aug 30.4 °C 46 % 26 km/h 0.2 mm High 25
3 Aug 30.2 °C 42 % 28 km/h 0.0 mm High 28
4 Aug 30.8 °C 30 % 29 km/h 0.0 mm High 31
5 Aug 30.3 °C 53 % 27 km/h 0.0 mm High 30
6 Aug 30.5 °C 51 % 28 km/h 0.0 mm High 31
7 Aug after 30.7 °C 42 % 33 km/h 0.0 mm High 28
8 Aug after 32.5 °C 27 % 40 km/h 0.0 mm Very high 41
9 Aug after 31.9 °C 27 % 31 km/h 0.0 mm Very high 42
10 Aug after 31.1 °C 44 % 36 km/h 0.0 mm High 34
11 Aug after 29.9 °C 53 % 31 km/h 0.2 mm High 34
12 Aug after 31.3 °C 37 % 37 km/h 0.1 mm High 34
13 Aug after 31.6 °C 26 % 46 km/h 0.0 mm Very high 49
14 Aug after 31.9 °C 23 % 41 km/h 0.0 mm Very high 49
15 Aug after 31.3 °C 41 % 30 km/h 0.0 mm High 34
16 Aug after 30.0 °C 51 % 24 km/h 0.2 mm High 28

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 16 Jul 2017
After · 13 Aug 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 531Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Tiwi Islands fire last?
GWIS (Copernicus) dates it between 23 July 2017 and 6 August 2017: 15 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,597 hectares (96.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Tiwi Islands (9,651 ha, 1.3 %).
What was the weather like?
During the fire the temperature reached 32.6 °C, humidity dropped to 28 % and gusts hit 48 km/h. The fire danger index (FWI) reached 48, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 531 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.