Tieling County fire, October 2026 铁岭县 · Tieling County
The fire started on 25 October 2026 in Tieling County, China, and satellites saw it burning for 4 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,106 hectares from heat detections, spread across a single municipality.
It is the 38th largest in Liaoning Province since 2016 (of 54 with a page). Number 856 in China in 2026, of 994.
Compare with…
- Burnt area
- 1,106ha
- GWIS perimeter (Copernicus)
- Duration
- 4days
- 25 Oct 2026 – 28 Oct 2026
- Municipalities hit
- 1
- counties
- Started on
- 25 Oct
- 2026
- Heat detections
- 15
- in a single hotspot: 90 MW
- Danger at start
- 13
- Moderate · FWI index
- Average daily power
- 508MW
- detected power per day, on average
Where it burned
How it evolved, day by day
27 Oct 2026 · 508 MW · 15
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 6 days without rain (1 mm or more) when it started.
This area had burned before
82% of the perimeter overlaps earlier fires recorded since 2016: 303 ha in 2020, 1,124 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 909 ha that had burned before.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Beijing (Dongcheng and Xicheng) boundary: geoBoundaries · Lee Beryman, OpenStreetMap · © OpenStreetMap contributors (ODbL 1.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
1,109 ha reached on 27 Oct0.5 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2025Inside the perimeter there were about 25 hectares of built-up land and about 3,200 residents (GHSL 2025, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 25 Oct | 15.0 °C | 15 % | 26 km/h | 0.0 mm | Moderate 13 |
| 26 Oct | 12.6 °C | 33 % | 30 km/h | 0.0 mm | Moderate 14 |
| 27 Oct | 7.7 °C | 18 % | 60 km/h | 0.0 mm | Moderate 21 |
| 28 Oct | 14.4 °C | 25 % | 54 km/h | 0.0 mm | Moderate 20 |
| 29 Oct after | 13.6 °C | 16 % | 44 km/h | 0.0 mm | Moderate 20 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 27 October 2026 the air beside the fire reached 50 µg/m³ of PM2.5. That day averaged 28: 1.8 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 15Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 5,793 haTieling County 铁岭县10 November 2025 · 17 days · 3 km away
- 2,481 haTieling County 铁岭县March 2025 · 4 days · 3 km away
- 3,434 haKaiyuan City 开原市February 2020 · 3 days · 15 km away
- 3,033 haKaiyuan City 开原市November 2025 · 16 days · 15 km away
- 2,187 haKaiyuan City 开原市March 2017 · 9 days · 15 km away
- 2,066 haTieling County 铁岭县4 November 2025 · 3 days · 33 km away
Frequently asked questions
- How long did the Tieling County fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 25 October 2026 to 28 October 2026 (4 days). The perimeter dates it from 27 October 2026 to 27 October 2026.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,106 hectares (11.1 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Tieling County (1,109 ha, 0.5 %).
- Is the Tieling County fire still active?
- No fire detections since 27 Oct 2026, 05:25 UTC. A lack of detections is not an official extinction.
- What was the weather like?
- During the fire the temperature reached 15.0 °C, humidity dropped to 15 % and gusts hit 60 km/h. The fire danger index (FWI) reached 21, class Moderate.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of China (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 119 · Emergency number and official warnings ›
Satellite cross-check
History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 28 October 2026.
- Page published (1,106 ha).
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 27 October 2026 to 27 October 2026. 15 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.