Skip to content
worldfires
FR · France ·

Thézan-des-Corbières fire, July 2019 Thézan-des-Corbières, Fabrezan, Boutenac

Out · last detection 15 Jul 2019, 13:35 UTC

The fire started on 15 July 2019 in Thézan-des-Corbières, France, and satellites saw it burning for 1 day. Copernicus mapped a burnt perimeter of 302 hectares from satellite imagery, spread across 3 municipalities.

It is the 10th largest in Aude since 2016 (of 15 with a page). Number 5 in France in 2019, of 26.

Compare with…
Burnt area
302ha
Copernicus perimeter
Duration
1day
15 Jul 2019 – 15 Jul 2019
Municipalities hit
3
communes
Started on
15 Jul
2019
Heat detections
30
in a single hotspot: 106 MW
Danger at start
65
Extreme · FWI index
Average daily power
736MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Jul15 Jul

How it evolved, day by day

15 Jul 2019 · 736 MW · 30

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

30°high
65km/h · peak gust
25%lowest humidity

It had gone 5 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

What happened to each town

  1. Thézan-des-Corbières 573 inhabitants · 0.5 km from the centre where it started
    252 ha reached on 15 Jul
    9.5 %
  2. Fabrezan 1,306 inhabitants · 4.8 km from the centre
    47 ha reached on 15 Jul
    1.6 %
  3. Boutenac 747 inhabitants · 2.5 km from the centre
    3 ha
    0.1 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Agricultural areas55 %
  • Coniferous forest31 %
  • Sclerophyllous scrub9.0 %
  • Scrub and transitional woodland5.3 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

Official record

According to BDIFF, a fire of 209 ha was recorded in Fabrezan on 15 July 2019 (the satellite measured 302 ha). The record has no coordinates, so it was matched by municipality and date. The two figures differ a lot, so these may not be exactly the same fire: take them as nearby records.

BDIFF (Base de Données sur les Incendies de Forêts en France). This is the agency’s consolidated statistic: it measures the area in its own way, which is why it can differ from the satellite.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 30 % of the area in France Strong wind: 47 % of the area in France

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Jul 29.8 °C 25 % 65 km/h 0.0 mm Extreme 65
16 Jul after 31.3 °C 26 % 36 km/h 0.0 mm High 33
17 Jul after 30.7 °C 34 % 47 km/h 0.0 mm Very high 41
18 Jul after 27.9 °C 39 % 58 km/h 0.0 mm Extreme 51
19 Jul after 31.8 °C 34 % 33 km/h 0.0 mm High 23
20 Jul after 27.7 °C 65 % 42 km/h 0.4 mm Moderate 21
21 Jul after 31.9 °C 48 % 22 km/h 0.0 mm Moderate 16
22 Jul after 35.1 °C 41 % 33 km/h 0.2 mm High 24
23 Jul after 33.6 °C 40 % 40 km/h 0.0 mm High 34
24 Jul after 33.6 °C 38 % 39 km/h 0.0 mm High 31
25 Jul after 31.8 °C 51 % 50 km/h 0.0 mm High 35

Its twins: fires that started in the same weather

It started with an FWI of 65.3, a minimum humidity of 25% and 5 days without rain. Fires in the area that started in weather like this since 2016: 12.

FWI at the start 65.3
Minimum humidity 25 %
Days without rain 5
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Ribaute fire, August 2025
11,391 ha 3 days FWI 66.5 Min. humidity 25 % 8 km away, in 2025

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

Fires in the area that started in similar weather: 12. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
65km/h · max. gust

It was considered over on 15 Jul, and not even 1 mm fell in the following ten days: it went out without rain.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Jul 2019
After · 22 Jul 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 17 July 2019 the air beside the fire reached 11 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak11 µg/m³
Days over the guideline0 days
PM1016 µg/m³
13 Jul15 Jul17 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 30Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in France

Frequently asked questions

How long did the Thézan-des-Corbières fire last?
Copernicus dates it between 15 July 2019 and 15 July 2019: 1 day between the first and last image with fire.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 302 hectares (3.0 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Thézan-des-Corbières (252 ha, 9.5 %); Fabrezan (47 ha, 1.6 %); Boutenac (3 ha, 0.1 %).
Did the fire reach a town?
The fire started in Thézan-des-Corbières and came within 0.5 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 29.8 °C, humidity dropped to 25 % and gusts hit 65 km/h. The fire danger index (FWI) reached 65, class Extreme.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of France (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · 18 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112 · 18.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 30 Suomi-NPP VIIRS detections on those dates.
  • Compared with BDIFF: 209 official ha against 302 ha of perimeter; similar, but with reservations.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM5 (Open Data Commons Attribution License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.