Skip to content
worldfires
BR · Brazil · –

Tasso Fragoso fire, September 2017 Tasso Fragoso, Balsas

Out · last detection 16 Sept 2017, 04:14 UTC

The fire started on 9 September 2017 in Tasso Fragoso, Brazil, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,489 hectares from heat detections, spread across 2 municipalities.

It is the 396th largest in Maranhão since 2016 (of 531 with a page). Number 789 in Brazil in 2017, of 994.

Compare with…
Burnt area
3,489ha
GWIS perimeter (Copernicus)
Duration
8days
9 Sept 2017 – 16 Sept 2017
Municipalities hit
2
municipalities
Started on
9 Sept
2017
Heat detections
103
in a single hotspot: 35 MW
Danger at start
58
Extreme · FWI index
Average daily power
105MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 9 Sept16 Sept
16 Sept 2017

How it evolved, day by day

9 Sept 2017 · 118 MW · 10 10 Sept 2017 · 138 MW · 14 11 Sept 2017 · 111 MW · 25 12 Sept 2017 · 57 MW · 11 13 Sept 2017 · 192 MW · 23 14 Sept 2017 · 218 MW · 13 15 Sept 2017 · 8 MW · 5 16 Sept 2017 · 1 MW · 2
9 Sept 11 Sept 14 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
48km/h · peak gust
21%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 2.2% of the area of London (35 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Tasso Fragoso 8,862 inhabitants where it started
    3,293 ha reached on 9 Sept
    0.8 %
  2. Balsas 101,767 inhabitants
    217 ha reached on 14 Sept
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 46 % of the area in Brazil 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
9 Sept 36.0 °C 25 % 44 km/h 0.0 mm Extreme 58
10 Sept 35.8 °C 25 % 46 km/h 0.0 mm Extreme 59
11 Sept 35.7 °C 23 % 45 km/h 0.0 mm Extreme 60
12 Sept 35.8 °C 23 % 48 km/h 0.0 mm Extreme 62
13 Sept 35.6 °C 22 % 42 km/h 0.0 mm Extreme 58
14 Sept 36.2 °C 21 % 45 km/h 0.0 mm Extreme 60
15 Sept 35.7 °C 22 % 47 km/h 0.0 mm Extreme 64
16 Sept 34.2 °C 25 % 46 km/h 0.0 mm Extreme 62
17 Sept after 35.4 °C 25 % 44 km/h 0.0 mm Extreme 59
18 Sept after 36.5 °C 21 % 42 km/h 0.0 mm Extreme 58
19 Sept after 37.3 °C 21 % 43 km/h 0.0 mm Extreme 61
20 Sept after 36.4 °C 23 % 45 km/h 0.0 mm Extreme 61
21 Sept after 35.9 °C 22 % 49 km/h 0.0 mm Extreme 64
22 Sept after 36.0 °C 23 % 43 km/h 0.0 mm Extreme 61
23 Sept after 36.1 °C 25 % 40 km/h 0.0 mm Extreme 57
24 Sept after 35.8 °C 23 % 42 km/h 0.0 mm Extreme 58
25 Sept after 36.3 °C 24 % 42 km/h 0.0 mm Extreme 57
26 Sept after 37.2 °C 23 % 41 km/h 0.0 mm Extreme 57

Its twins: fires that started in the same weather

It started with an FWI of 58.2, a minimum humidity of 25% and more than two months without rain. Fires in the area that started in weather like this since 2016: 21.

FWI at the start 58.2
Minimum humidity 25 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Balsas fire, September 2019
6,388 ha 10 days FWI 58.2 Min. humidity 23 % 27 km away, in 2019

First rain (1 mm or more) after it ended: 10.0 mm on 29 Sept.

What happened to them

9 days
median duration
4,543 ha
median area
5 %
went past 10,000 ha
1.6 mm
rain at the end (median; 11 of 21 had it)

It burned an area similar to its twins (3,489 ha against a median of 4,543 ha) and lasted 8 days, against 9 days.

In 10 of 21, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
48km/h · max. gust

It was considered over on 16 Sept, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 11 of 21, with a median of 1.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 2 Sept 2017
After · 23 Sept 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 103Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Tasso Fragoso fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 9 September 2017 to 16 September 2017 (8 days). The perimeter dates it from 9 September 2017 to 15 September 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,489 hectares (34.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Tasso Fragoso (3,293 ha, 0.8 %); Balsas (217 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 36.2 °C, humidity dropped to 21 % and gusts hit 48 km/h. The fire danger index (FWI) reached 64, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 21. Their median duration was 9 days and their median area 4,543 ha; 5 % went past 10,000 ha. In 10 of 21, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 15 September 2017 → 16 September 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 9 September 2017 to 15 September 2017. 103 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.